The analysis of pedaling techniques with platform pedals

• Autorzy: Stępniewski A. A. , Grudziński J.

Identyfikatory

DOI

10.2478/ijame-2014-0044

• Języki publikacji: EN

Abstrakty

EN

The paper analyzes a pedaling technique with platform pedals in which the influence of the geometric and tribological parameters on the torque course of the active forces in the crank rotation axis is determined. Distribution of forces of feet acting on pedals as a function of the crank rotation angle was performed and on this basis the specific pedaling zones and their ranges and the courses of the value of variable active torque and pedaling work during the full cycle were determined. The course of changes in the movements in the ankle joint is described with a function depending on the crank and limb position and loading of the joint. A numerical example has also been presented and a discussion of the results has been carried out.

Słowa kluczowe

EN

cycling; platform pedal; pedaling; cycling efficiency

PL

rower; pedałowanie; wał korbowy

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2014
• Tom: Vol. 19, no. 3
• Strony: 633--642
• Opis fizyczny: Bibliogr. 8 poz., rys., tab., wykr.

Twórcy

autor

Stępniewski A. A.

• Faculty of Production Engineering University of Life Sciences in Lublin Akademicka 13, 20-950 Lublin, POLAND

autor

Grudziński J.

• Faculty of Production Engineering University of Life Sciences in Lublin Akademicka 13, 20-950 Lublin, POLAND

Bibliografia

• [1] Cockcroft S.J. (2011): An evaluation of inertial motion capture technology for use in the analysis and optimization of road cycling kinematics. - Stellenbosch University.
• [2] Defraeye T., Blocken B., Koninckx E., Hespel P. and Carmeliet J. (2010): Aerodynamics study of different cyclic positions: CFD Analysis and full scale wind tunnel tests. - J. Biomechanics, vol.43, pp.1262-1268.
• [3] Höchtl F., Böhm H. and Senner V. (2010): Prediction of energy efficient pedal forces in cycling using musculoskeletal simulation models. - Proc. Engineering, vol.2, pp.3211-3215.
• [4] Li Li and Caldwell G.E. (1998): Muscle coordination in cycling: effect of surface incline and posture. - J Appl. Physiol., vol.85, pp.927-934.
• [5] Neptune R.R. and Herzog W. (2000): Adaptation of muscle coordination to altered task mechanics during steady-state cycling. - J. of Biomechanics, vol.33, pp.165-172.
• [6] Park S.-Y., Lee S.-Y., Kang H.C. and Kim S.-M. (2012): EMG analysis of lower limb muscle activation pattern during pedaling experiments and computer simulations. - Int. J. of Precision Engineering and Manufacturing, vol.13, No.4, pp.601-608.
• [7] Poliszczuk D.A. (1996): Cycling. Theory and practice of training. - Wyd. COS. Warsaw.
• [8] Sickle Van Jr J.R. and Hull M.L. (2007): Is economy of competitive cyclic affected by the anterior-posterior foot position on the pedal. - J. Biomechanics, vol.40, pp.1262-1267.