Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Purpose: To investigate the strength of tees with regard to their erosion wear, it is necessary to consider the complex three-dimensional geometric shape of the erosion worn inner surface of the tee. In addition, the study of the strength of the erosion worn tees of the main gas pipelines is complicated by the occurrence of additional stresses caused by changes in the direction of movement of the gas stream, resulting in an uneven pressure distribution in the inner cavity of the tee, and the temperature difference in its walls. Design/methodology/approach: Methodology for complex numerical three-dimensional simulation of the stressed state of tees of the main gas pipelines, taking into account the gas-dynamic processes that occur in the places of these defects, erosion wear of the tee wall, temperature difference in the tee walls. Findings: The acceptable parameters of erosion defects of tees of gas pipelines, and residual life of tees with erosion defects of the wall should be determined. Research limitations/implications: The developed model does not take into account internal corrosion and corrosion products as an additional erosion factor. Further studies plan to develop a model of corrosion-erosion wear of pipeline elements. Practical implications: The developed technique allows determining the location of erosion defects, estimating the strength and determining the residual life of tees with erosion wear of the wall in order to ensure their reliability, to rank such defects according to the degree of danger, to determine which of them are critical and need an immediate repair. Originality/value: Based on the gas-dynamic processes occurring in the internal cavity of the main gas pipelines’ tees, the complex three-dimensional geometric form of wall erosion defects, and temperature difference, the technique of three-dimensional simulation of stress state of the main gas pipelines’ tees is developed
Wydawca
Rocznik
Tom
Strony
63--78
Opis fizyczny
Bibliogr. 27 poz.
Twórcy
autor
- Department Oil and Gas Pipelines and Storage Facilities, Institute of Petroleum Engineering, Ivano-Frankivsk National Technical University of Oil and Gas, 15, Karpatska str., Ivano-Frankivsk, Ukraine
autor
- Department Oil and Gas Pipelines and Storage Facilities, Institute of Petroleum Engineering, Ivano-Frankivsk National Technical University of Oil and Gas, 15, Karpatska str., Ivano-Frankivsk, Ukraine
autor
- Department Oil and Gas Pipelines and Storage Facilities, Institute of Petroleum Engineering, Ivano-Frankivsk National Technical University of Oil and Gas, 15, Karpatska str., Ivano-Frankivsk, Ukraine
autor
- Department of Chemistry, Institute of Tourism and Geosciences, Ivano-Frankivsk National Technical University of Oil and Gas, 15, Karpatska str., Ivano-Frankivsk, Ukraine
autor
- Department Oil and Gas Pipelines and Storage Facilities, Institute of Petroleum Engineering, Ivano-Frankivsk National Technical University of Oil and Gas, 15, Karpatska str., Ivano-Frankivsk, Ukraine
autor
- Department of Transport Technologies, Faculty of Engineering of Machines, Structures and Technologies, Ternopil Ivan Puluj National Technical University, 56, Ruska Street, Ternopil, Ukraine
autor
- Department of Transport Technologies, Faculty of Engineering of Machines, Structures and Technologies, Ternopil Ivan Puluj National Technical University, 56, Ruska Street, Ternopil, Ukraine
Bibliografia
- [1] L.Y. Poberezhnyi, P.O. Marushchak, A.P. Sorochak, D. Draganovska, A.V. Hrytsanchuk, B.V. Mishchuk, Corrosive and mechanical degradation of pipelines in acid soils, Strength of Materials 49/4 (2017) 539-549, DOI: https://doi.org/10.1007/s11223-017-9897-x
- [2] L. Poberezhny, P. Maruschak, A. Hrytsanchuk, B. Mischuk, D. Draganovska, L. Poberezhna, Impact of AC current density on material corrosion of distribution pipelines, Koroze a Ochrana Materialu 61/5 (2017) 178-184, DOI: https://doi.org/10.1515/kom-2017-0023
- [3] L. Poberezhny, A. Hrytsanchuk, I. Okipnyi, L. Poberezhna, A. Stanetsky, N. Fedchyshyn, Minimizing Losses During Natural Gas Transportation, Strojmcky Casopis - Journal of Mechanical Engineering 69/1 (2019) 97-108, DOI: https://doi.org/10.2478/scjme- 2019-0008
- [4] P. Popovych, O. Lyashuk, O. Shevchuk, O.P. Tson, L.Ya. Poberezhna, I.M. Bortnyk, Influence of organic operation environment on corrosion properties of metal structure materials of vehicles, INMATEH - Agricultural Engineering 52/2 (2017) 113-118.
- [5] I. Lytvynenko, P. Maruschak, O. Prentkovskis, A. Sorochak, Modeling Kinetics of Dynamic Crack Propagation in a Gas Mains Pipe as Cyclic Random Process, in: I. Kabashkin, I. Yatskiv, O. Prentkovskis (Eds.), Reliability and Statistics in Transportation and Communication. Lecture Notes in Networks and Systems, vol. 36, Springer, 2018, 262-269, DOI: https://doi.org/10.1007/978-3-319-74454-4 25
- [6] P. Popovych, O. Lyashuk, I. Murovanyi, V.O. Dzyura, O.S. Shevchuk, V.D. Myndyuk, The service life evaluation of fertilizer spreaders undercarriages, INMATEH - Agricultural Engineering 50/3 (2016) 39-46.
- [7] I.V. Lytvynenko, P.O. Maruschak, S.A. Lupenko, P.V. Popovych, Modeling of the Ordered Surface Topography of Statically Deformed Aluminum Alloy, Materials Science 52 (2016) 113-122, DOI: https://doi.org/10.1007/s11003-016-9933-1
- [8] R.A. Barna, P.V. Popovich, Influence of Operating Media on the Fatigue Fracture of Steels for Elements of Agricultural Machines, Materials Science 50/3 (2014) 377-380, DOI: https://doi.org/10.1007/s11003-014- 9729-0
- [9] B.M. Hevko, P.V. Popovich, A.Y. Diachun, O.L. Lyashuk, R.O. Liubachivskyi, The study of bulk material kinematics in a screw conveyor-mixer, INMATEH - Agricultural Engineering 47/3 (2015) 156-163.
- [10] Ya.V. Doroshenko, A.P. Oliynyk, O.M. Karpash, Modeling of stress-strain state of piping systems with erosion and corrosion wear, Physics and Chemistry of Solid State 21/1 (2020) 151-156, DOI: https://doi.org/10.15330/pcss.21.1.151-156
- [11] P. Vasava, Fluid Flow in T-Junction of Pipes, Master’s Thesis, Department of Information Technology, Lappeenranta University of Technology, Lappeenranta, 2007.
- [12] N. Lin, H.-q. Lan, Y.G. Xu, R.-y. He, Relative velocity factor advances internal tee erosion prediction, Oil and Gas Journal 112/8 (2014) 74-76, 78-80.
- [13] D. Vigolo, I. Griffiths, S. Radl, H. Stone, An experimental and theoretical investigation of particle- wall impacts in a T-junction, Journal of Fluid Mechanics 727 (2013) 236-255, DOI: https://doi.org/10.1017/jfm.2013.200
- [14] H. Pouraria, J. Seo, J. Paik, Numerical study of erosion in critical components of subsea pipeline: tees vs bends, Ships and Offshore Structures 12/2 (2017) 233-243, DOI: https://doi.org/10.1080/17445302.2015.1131889
- [15] E. Mahdi, A. Rauf, S. Ghani, A. El-Noamany, A. Pakari, Erosion-Corrosion behavior and failure analysis of offshore steel tubular joint, International Journal of Electrochemical Science 8 (2013) 7187-7210.
- [16] A. Ryabov, A. Kudryavtsev, O. Voronkov, A. Haritonov, A. Maltsev, I. Melnikov, M. Kiselev, M. Straw, Numerical analysis of erosion of gas-pipeline elements, Proceedings of the STAR Global Conference, Vienna, 2014, 16.
- [17] Z. Chen, X.-Q. Liu, K. Wang, L.-Y. Lu, Q.-R. Wang, Cracking failure analysis of T-type welded tee in waste heat boiler, Advances in Engineering Research 103 (2016) 427-432, DOI: https://dx.doi.org/10.2991/icmea-16.2016.71
- [18] K. Squires, J. Eaton, Particle response and turbulence modification in isotropic turbulence, Physics of Fluids A: Fluid Dynamics 2/7 (1990) 1191-1203, DOI: https://doi.org/10.1063/L857620
- [19] J.O. Hinze, Turbulence, McGraw-Hill, New York, 1975.
- [20] I. Finnie, Y. Kabil, On the formation of surface ripples during erosion, Wear 8/1 (1965) 60-69, DOI: https://doi.org/10.1016/0043-1648(65)90251-6
- [21] R. H. Gallagher, Finite element analysis: Fundamentals, Prentice-Hall, New York, 1975.
- [22] Industry standard: OCT 102-61-81: Welded steel pipelines details on Ru up to 10.0 MPa (100 kgf/cm2). Welded tees with reinforcing pads. Dimensions: regulatory and technical material, Ministry of Construction of Oil and Gas Industry, 1981.
- [23] Ya.V. Doroshenko, V.B. Zapukhliak, T.I. Marko, R.B. Stasiuk, Experimental studies of erosion wear of pipeline shaped elements, Exploration and Development of Oil and Gas Fields 1/62 (2017) 66-76.
- [24] Ya. Doroshenko, Ju. Doroshenko, V. Zapukhliak, L. Poberezhny, P. Maruschak, Modeling computational fluid dynamics of multiphase flows in elbow and T-junction of the main gas pipeline, Transport 34/1 (2019) 19-29, DOI: https://doi.org/10.3846/transport.2019.7441
- [25] Ya. Doroshenko, I. Rybitskyi, Investigation of the influence of the gas pipeline tee geometry on hydraulic energy loss of gas pipeline systems, Eastern-European Journal of Enterprise Technologies 1/8(103) (2020) 28-34, DOI: https://doi.org/10.15587/1729-4061.2020.192828
- [26] V. Zapukhliak, L. Poberezhny, P. Maruschak, Jr, V. Grudz, R. Stasiuk, J. Brezinova, A. Guzanova, Mathematical modeling of unsteady gas transmission system operating conditions under insufficient loading, Energies 12/7 (2019) 1325-1339, DOI: https://doi.org/ 10.3390/en12071325.
- [27] Ya.V. Doroshenko, T.I. Marko, Yu.I. Doroshenko, The study of erosive wear of the shaped elements of compressor station manifold of a gas pipeline, Journal of Hydrocarbon Power Engineering 3/2 (2016) 65-78.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-92563d85-0b8c-477f-bb5e-ae8acbe37752