Metallic alloy with shape memory – selected properties and engineering aspects

• Autorzy: Kuś Krzysztof , Frączyk Adam , Wojtkowiak Adam

Identyfikatory

DOI

10.31648/ts.5296

• Języki publikacji: EN

Abstrakty

EN

In the case of shape memory alloys (SMA), a form to which a material is expected to return during heating can be repeatedly programmed, whereas other related properties can be individually adjusted. It was found that most producers of commercial assortment based on SMA as well as traders are seldom willing to lift the veil of secrecy on this topic. In the context of own experimental studies, the authors made a reference to the technical aspects of some post-treatments of a Ni-Ti alloy with a view to further practical application, e.g. the design and construction of machinery and structures with the involvement of SMA. For these purposes, high-temperature shape setting trials were carried out using various parameters of heat treatment with no secrecy surrounding the procedures applied. Some of the tested parameters proved effective, whereas some were less useful. Following the activation of the reverse transformation by heating, a somewhat different behaviour was observed, and simultaneously one of the crucial material temperatures was determined. The paper as a whole is reported from a specifically engineering/technical point of view, which is continuously emphasized in the content of the presented article.

Słowa kluczowe

EN

Smart/Active Ni-Ti alloy; functional properties; post-treatment of shape memory alloy

• Wydawca: Wydawnictwo Uniwersytetu Warmińsko-Mazurskiego w Olsztynie
• Czasopismo: Technical Sciences / University of Warmia and Mazury in Olsztyn
• Rocznik: 2019
• Tom: nr 22(4)
• Strony: 337--350
• Opis fizyczny: Bibliogr. 22 poz., rys., wykr., zdj.

Twórcy

autor

Kuś Krzysztof

• Katedra Technologii Materiałów i Maszyn, Wydział Nauk Technicznych, Uniwersytet Warmińsko-Mazurski, ul. Oczapowskiego 11, 10-719 Olsztyn

autor

Frączyk Adam

• Faculty of Technical Sciences, University of Warmia and Mazury in Olsztyn

autor

Wojtkowiak Adam

• Faculty of Technical Sciences, University of Warmia and Mazury in Olsztyn

Bibliografia

• Braz Fernandes F.M., Mahesh K.K., Paula A.S. 2013. Thermomechanical Treatments for Ni-Ti Alloys. In: Shape Memory Alloys – Processing, Characterization and Applications. Ed. F.M.B. Fernandes. InTech., p. 3-26.
• Duerig T., Pelton A. 1994. TiNi Shape Memory Alloys. In: Materials Properties Handbook: Titanium Alloys. ASM International, p. 1035-1048.
• Haberland C.H., Elahinia M.H. 2016. Fabricating NiTi SMA Components. In: Shape Memory Alloy Actuators: Design, Fabrication, and Experimental Evaluation. Ed. M.H. Elahinia. First Edition. John Wiley & Sons, Ltd., p. 191-238.
• Heidari B., Kadkhodaei M., Barati M., Karimzadeh F. 2016. Fabrication and modeling of shape memory alloy springs. Smart Materials and Structures, 25: 125003.
• Humbeeck J. van. 2001. Shape Memory Alloys: A Material and a Technology. Advanced Engineering Materials, 3(11): 837-850.
• Jahanbazi Asl F., Kadkhodaei M., Karimzadeh F. 2019. The effects of shape-setting on transformation temperatures of pseudoelastic shape memory alloy springs. Journal of Science: Advanced Materials and Devices, 4(4): 568-576. https://doi.org/10.1016/j.jsamd.2019.10.005 (access: 5.12.2019).
• Kamila S. 2013. Introduction, classification and applications of smart materials: an overview. American Journal of Applied Sciences, 10(8): 876-880.
• Kaushal A., Vardhan A., Rawat R.S.S. 2016. Intelligent Material For Modern Age: A Review. IOSR Journal of Mechanical and Civil Engineering, 13(3): 10-15. http://www.iosrjournals.org/iosr-jmce/papers/vol13-issue3/Version6/B13030-61015.pdf (access 8.08.2019).
• Kucharczyk W., Mazurkiewicz A., Żurowski W. 2011. Nowoczesne materiały konstrukcyjne – wybrane zagadnienia. Wyd. Politechnika Radomska, Radom., p. 429-454.
• Kuś K. 2010. The Influence of Repeated Heating and Cooling Process on the Transformation Characteristics in Ni-Ti Alloy. Technical Sciences, 13: 203-211.
• Kuś K., Kłysz S. 2012. Investigation of thermal transformation properties under different annealing conditions of Ni-Ti shape memory alloy. Bulletin of the Military University of Technology in Warsaw, LXI(2): 245-255.
• Liu X., Wang Y., Yang D., Qi M. 2008. The effect of ageing treatment on shape-setting and superelasticity of a nitinol stent. Materials Characterization, 59: 402-406.
• Memry Corporation. Inspections. Testing. https://www.memry.com/inspections-testing (access 15.09.2019).
• Mohd Jani J., Leary M., Subic A., Gibson M.A. 2014. A review of shape memory alloy research, applications and opportunities. Materials and Design, 56: 1078-1113.
• Naresh C., Bose P.S.C., Rao P.S.C. 2016. Shape memory alloys: a state of art review. IOP Conf. Series: Materials Science and Engineering, 149: 012054. https://iopscience.iop.org/article/10.1088/1757-899X/149/1/012054/pdf (access 10.06 2019).
• Rao A., Srinivasa A.R., Reddy J.N. 2015. Design of Shape Memory Alloy (SMA) Actuators. Springer Briefs in Computational Mechanics, Springer.
• Sadiq H., Wong M.B., Al-Mahaidi R., Zhao X.L. 2010. The effects of heat treatment on the recovery stresses of shape memory alloys. Smart Materials and Structures, 19: 035021.
• Stortiero F. 2015. Design and Industrial Manufacturing of SMA Components. In: Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications. Eds. L. Lecce, A. Concilio. Butterworth-Heinemann. Elsevier Ltd.. p. 215-244.
• Suzuki Y. 1998. Fabrication of shape memory alloys. In: Shape Memory Materials. Eds. K. Otsuka, C.M. Wayman. Cambridge University Press, p. 133-148.
• Turabi A.S., Saedi S., Saghaian S.M., Karaca H.E., Elahinia M.H. 2016. Fabricating NiTi SMA Components. In: Shape Memory Alloy Actuators: Design, Fabrication, and Experimental Evaluation. First Edition. Ed. M.H. Elahinia. John Wiley & Sons, Ltd., p. 239-277.
• Villa E. 2015. Manufacturing of Shape Memory Alloys. In: Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications. Eds. L. Lecce, A. Concilio. Butterworth-Heinemann. Elsevier Ltd., p. 79-96.
• Wang Z.G., Zu X.T., Feng X.D., Zhu S., Zhou J.M., Wang L.M. 2004. Annealing-induced evolution of transformation characteristics in TiNi shape memory alloys. Physica B., 353: 9-14.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).