PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Pilling Performance and Abrasion Characteristics of Plain - Weave Fabrics Made from Open : End and Ring Spun Yarns

Autorzy
Identyfikatory
Warianty tytułu
PL
Odporność na piling i charakterystyki ścierania tkanin o splocie płóciennym wykonanych z przędz obrączkowych i rotorowych
Języki publikacji
EN
Abstrakty
EN
In this experimental study, plain fabrics made from100% cotton ring carded, ring combed and OE rotor spun yarns were produced. The weft yarn count, warp yarn count and fabric sett of the fabrics were constant. The pilling and abrasion resistance of the fabrics were investigated. After that the relationships between yarn characteristics and abrasion resistance and pilling were investigated. Finally the relationships between abrasion resistance and pilling were investigated for every group of fabrics. The results show that the arithmetic means of abrasion resistance and pilling performance have a maximum value in fabrics made from OE rotor spun yarns. The arithmetic means of abrasion resistance and pilling performance have a minimum value in fabrics made from ring carded spun yarns. Whereas standard deviations in fabric made from OE rotor spun yarns have a maximum value, standard deviations in fabric made from ring combed spun yarns have a minimum value for both fabric characteristics. The important relationships between yarn hairiness and abrasion resistance and pilling were obtained in all the fabrics. Additionally, the important relationships between abrasion resistance and pilling were obtained for all the fabrics. All correlation coefficients were found as negative. The correlation coefficient of fabrics made from ring combed spun yarns has a maximum value. The correlation coefficient of fabrics made from OE rotor spun yarns has a minimum value without taking into account the fact that it is negative or positive.
PL
Dla testów wyprodukowano tkaniny o splocie płóciennym z przędz rotorowych i obrączkowych ze 100% zgrzeblonej bawełny. Tkaniny wykonano z przędz o tej samej masie liniowej oraz identycznej gęstości osnowy i wątku. Badano odporność na piling i ścieranie wypro­dukowanych tkanin. Zależności pomiędzy odpornością na ścieranie i piling były porównywane między każdą z grup tkanin. Stwierdzono, że średnie arytmetyczne wyników testów odporności na ścieranie i piling mają swoje maksimum dla tkanin wykonanych z przędz rotorowych. Podczas gdy minimum leży w zakresie tkanin wykonanych z przędz obrączkowych. Natomiast odchylenia standardowe mają swoje maksimum dla tkanin z przędz rotorowych a minimum dla tkanin z przędz obrączkowych dla obydwu parametrów. Określono również ważną zależność pomiędzy włochatością przędz a odpornością na ścieranie i piling oraz zależność pomiędzy odpornością na ścieranie i pilingiem dla wszystkich tkanin. Wszystkie współczynniki korelacji były ujemne. Współczynnik korelacji tkanin z przędz obrączkowych ma maksimum podczas gdy współczynnik korelacji dla tkanin z przędz rotorowych ma mi­nimum niezależnie od tego czy jest dodatni czy ujemny.
Rocznik
Strony
81--84
Opis fizyczny
Bibliogr. 18 poz., tab.
Twórcy
autor
  • Pamukkale University, Denizli Vocational Scholl, Denizli, Turkey
Bibliografia
  • 1. Bishop, D.P., Fabrics: Sensory and Mechanical Properties, 1996, Textile Progress, Vol. 26 No. 3, Manchester, p. 62.
  • 2. Greenwood, K., Weaving; Control of fabric structure, Merrow Publishing Co. Ltd., 1975, p.8.
  • 3. Okur, A., Kumaşlarda Boncuklanma: Oluşumu, Etkileyen Faktörler ve Test Yöntemleri, Tekstil ve Mühendis, 1994, Vol. 45-46, pp. 10-18
  • 4. Ahmed, M., Slater, K., The Progressive Deteoriation of Textile Materials Part IV: The Effect of Accelerator Abrasion on the Comfort Properties of Fabrics, 1989, Journal of Text. Inst., Vol.80, pp. 279-284
  • 5. Alston, P.V., Effect of Yarn Spinning System on Pill Resistance of PET/Cotton Knit Fabrics, 1992, Textile Research Journal, Vol. 62, No.3, pp. 105-108
  • 6. Cook, J.G., Handbook of textile fibres, Vol. 1: Natural Fibres, Woodhead Publishing Limited, 2001, Cambridge, England, p. 208
  • 7. Lee, W. and Dhingra, R.C. and Lo, T.Y. and Abbas, M.S., Effects of finishing on low stress mechanical and surface properties of silk and denim fabric, 1996, Journal of Federation of Asian Professional Textile Associations, Vol. 3, pp. 50-58
  • 8. Ning, P. and Zeronian S.H., An Alternative Approach to the Objective Measurement of Fabrics, 1993, Textile Research Journal, Vol. 63. No.1, pp. 33- 43
  • 9. Mansour M. and Peter, R.L., Comparison of Physical Properties of Fabrics Woven from Open End and Ring Spun Yarns, 1973, Textile Research Journal, Vol. 43. No. 3, pp. 154-166
  • 10. Adanur, S. and Gowayed, Y. and Thomas, H. and Ghosh, T., 2000, On-Line Measurement of Fabric Mechanical Properties for Process Control, Auburn University, 196-A09, 7p.
  • 11. Candan, C, Nergis, U.B., Iridag, Y., Performance of Open-end and Ring Spun Yarns in Weft Knitted Fabrics, 2000, Textile Research Journal, Vol. 70. No 2, pp. 177-181.
  • 12. Özdil, N., Özdoğan, E., Demirel, A., Öktem, T., A Comparative Study of the Characteristics of Compact Yarn-Based Knitted Fabrics, 2005, Fibres & Textiles in Eastern Europe, Vol.13. No. 2 (50), pp. 39-43.
  • 13. Candan, C. and Önal, L., Dimensional Pilling and Abrasion Properties of Weft Knits Made from Open-End and Ring Spun Yarns, 2002, Textile Research Journal, Vol. 72. No 2, pp. 164-169.
  • 14. Nergis, B.U. and Candan, C., Properties of Plain Knitted Fabrics from Chenille Yarns, 2003, Textile Research Journal, Vol. 73. No 12, pp. 1052-1056.
  • 15. Usta, İ. and Canoğlu, S., Influence of Ring Traveller Weight and Coating on Hairiness of Acrylic Yarns, 2002, Fibres & Textiles in Eastern Europe, Vol.10. No. 4 (39), pp. 20-24.
  • 16. Chen, X. and Huang, X.B., Evaluating Fabric Pilling with Light-Projected Image Analyses, 2004, Textile Research Journal, Vol. 74. No 11, pp. 977-981.
  • 17. Göktepe, Ö., Fabric Pilling Performance and Sensitivity of Several Pilling Tester, 2002, Textile Research Journal, Vol. 72. No 7, pp. 625-630.
  • 18. Püskülcü, H and İkiz F., Istatisige Giris, Ege Universitesi Yayınları, Bornova, 1983, p. 364 .
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-91ed830a-8cb1-44b9-b21b-f4508927f9b0
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.