PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Electromagnetic shielding effectiveness of doubled copper-cotton yarn woven materials

Identyfikatory
Warianty tytułu
PL
Efektywność elektromagnetycznego ekranowania tkanin ze zdwojonej przędzy bawełnianej z udziałem drutów miedzianych
Języki publikacji
EN
Abstrakty
EN
This paper describes a study on the development of 2-ply and 3-ply of cotton copper yarns and fabrics for electromagnetic shielding applications. 2-ply and 3-ply of cotton-copper yarns were produced on ring doubling machines and their woven fabrics made on a power loom. The shielding effectiveness of the 2-ply and 3-ply of cotton copper yarn fabrics was measured using the Network Analyser electromagnetic shielding test (ASTM D4935-99) in the frequency range from 20 to 18,000 MHz. The variation in EMSE with the woven fabric structures, ends per cm, picks per cm, cover factor, yarn type, and copper wire diameter are discussed. The results indicate that the woven fabric of higher EMSE proposed can be used for the purpose of EMI shielding, as well as for some electronic and electrical applications.
PL
Opisano badania związane z wytworzeniem tkanin bawełnianych z przędz podwójnych i potrójnych z udziałem drutów miedzianych. Przędze wytworzono na maszynach obrączkowych a tkaniny utkano na krośnie mechanicznym. Efektywność ekranowania pola elektromagnetycznego mierzono za pomocą analizatora sieciowego zgodnie z normą ASTM w zakresie częstotliwości od 20 MHz do 18 GHz. Przedyskutowano zależność efektywności ekranowania fal elektromagnetycznych od gęstości osnowowej i gęstości wątkowania, współczynnika pokrycia, typu przędzy oraz przekroju zastosowanych drutów miedzianych. Stwierdzono, że badane tkaniny wykazujące się wyższym współczynnikiem efektywności mogą znaleźć praktyczne zastosowanie w ekranach fal elektromagnetycznych.
Rocznik
Strony
74--80
Opis fizyczny
Bibliogr. 35 poz., fig., tab.
Twórcy
  • Department of Textile Technology, Bannari Amman Institute of Technology, Sathyamangalam, Tamilnadu, India
  • Department of Textile Technology, P.S.G. College of Technology, Peelamedu, Coimbatore Tamilnadu, India
Bibliografia
  • 1. Koprowska J., Pietranik M., Stawski W.; New type textiles with Shielding Properties, Fibres & Textiles in Eastern Europe, Vol. 12, No. 3 (2004) pp. 39–42.
  • 2. Clayton R.P.; Introduction to Electromagnetic Compatibility, John Willey & Sons Inc., USA, (1992) pp 633-665.
  • 3. Perumalraj R., Dasaradan B.S.; ‘Electromagnetic shielding Fabric’, Asian Textile Journal, Vol. 17, No. 10 (2008) pp. 62-68.
  • 4. Perumalraj R., Dasaradan B.S.; ‘Electrically conductive polymer materials for EMI shielding’, Asian Textile Journal, Vol. 18, No. 1 (2009) pp. 49-57.
  • 5. Stewart R. Levy.; Finisher Metal Finish, (1983) p. 2.
  • 6. Hewlett-Packard Co, HP 8752 Operation Manual, Performance tests, (1996) pp. 4-36.
  • 7. Charles D.; Storms etc Metal Finish, (1983) p. 47.
  • 8. Travis J.E.; 39th Annual Technical Conference, Society of the Plastic Industry, (1984) pp. 16-19.
  • 9. Cheng K.B., Lee K.C., Ueng T.H., Mou K.J.; Electrical and Impact Properties of the Hybrid Knitted inlaid Fabric Reinforced Polypropylene Composites, Composites Part A, Vol. 33, No. 9 (2002) pp. 1219–1226.
  • 10. Cheng K.B., Cheng T.W., Lee K.C., Uieng T.H., Hsing W.H.; Effect of Yarn Constituent and Fabric Specifications on Electrical Properties of Hybrid Woven Fabrics, Composites Part A, Vol. 34, No. 10 (2003) pp. 971–978.
  • 11. Perumalraj R., Dasaradan B.S., Sampath V.R.; ‘Study on Electromagnetic shielding conductive fabrics’, National Conference on Functional Textiles andApparels, PSG Tech., Coimbatore, (2007) pp.187-203.
  • 12. Perumalraj R., Ganeshbabu C., Saravanan L., Sujatha K.; ‘Protective Conductive Textiles’, National Conference on signals systems and security (NCSSS 2006), BIT, Sathy, (2006) pp. 311-316.
  • 13. Koprowska J., Pietranik M., Stawski W.; New Type of Textiles with Shielding Properties, Fibers & Textiles in Eastern Europe, Vol. 12, No. 3 (2004) pp. 39-42.
  • 14. Chen H.C., Lee K.C., Lin J.H.; Electromagnetic and Electrostatic Shielding Properties of Co-weaving-knitting Fabrics Reinforced Composites, Composites Part A, Vol. 35 (2004) pp. 1249-1256.
  • 15. Cheng K.B., Lee M.L., Ramakrishna S.; Electromagnetic Shielding Effectiveness of Stainless Steel/Polyester Woven Fabrics, Textile Research Journal, Vol. 71, No. 1 (2001) pp. 42-49.
  • 16. Su C.-I., Chern J.-T.; Effect of Stainlesscontaining Fabrics on Electromagnetic Shielding Effectiveness, Textile Research Journal, Vol. 74, No. 1 (2004) pp. 51-54.
  • 17. Kirkpatrick S.; Percolation and Conduction, Rev. Mod. Physics, Vol. 45, No. 4 (1973) pp. 574-575.
  • 18. Last B.J., Thouless D.J.; Percolation Theory and Electrical Conductivity, Physics Rev. Lett., Vol. 27, No. 25 (1971) pp. 1719–1721.
  • 19. Motojima S., Noda Y., Hoshida S.; Electromagnetic Wave Absorption Property of Carbon Microcoils in 12 – 110 GHz Region, J. Appl. Phys. Vol. 94, No. 4 (2003) pp. 2325–2330.
  • 20. Ramson S.; Metalloplastics: High Conductivity Materials, Polymer News, Vol. 8 (1982) pp. 124-125.
  • 21. Wilson P.F., Ma M.T.; Techniques for Measuring the Electromagnetic Shielding Effectiveness of Materials. Part 1. Far Field Simulation, IEEE Trans, Electroma-gnet. Compatible. Vol. 30, No. 8 (1988) pp. 239.
  • 22. Perumalraj R., Dasaradan B.S, Anbarasu R., Arokiaraj P., Leo H.S.; ‘Electromagnetic shielding effectiveness of copper core-woven fabrics’, Journal of the Textile Institute, Vol. 100, No. 6 (2009) pp. 512-524.
  • 23. Perumalraj R., Dasaradan B.S.; ‘Electromagnetic shielding effectiveness of copper core yarn knitted fabrics’, Indian Journal of Fibre and Textile Research, Vol. 34, No. 2 (2009) pp. 149-154.
  • 24. Chung D.D.L.; Materials for Electroma - gnetic Interference Shielding, J. Mater. Eng. Perform. Vol. 9, No. 3 (2000) pp. 350-354.
  • 25. Aniolczyk H., Koprowska J., Mamrot P., Lichawaka J.; Application of Electrically Conductive Textiles as Electromagnetic Shields in Physiotheraphy, Fibers & Textiles in Eastern Europe, Vol. 12, No. 4 (2004) pp. 47-50.
  • 26. Lin J.H., Lou C.W.; Electrical Properties of Laminates made from a New Fabric with PP/Stainless Steel Commingled Yarn, Textile Res. J, Vol. 73, No. 4 (2003) pp. 322-326.
  • 27. Su C.I., Chern J.T.; Effect of Stainless Steel-containing Fabrics on Electromagnetic Shielding Effectiveness, Textile Res. J. Vol. 74, No. 1 (2004) pp. 51–54.
  • 28. Cheng K.B., Lee K.C., Ueng T.H., Mou K.J.; Electrical and Impact Properties of the Hybrid knitted Inlaid Fabric Reinforced Polypropylene Composites, Composites: Part A, Appl. Sci. Manufact., Vol. 33, No. 9 (2002) pp. 1219-1226.
  • 29. Perumalraj R., Sampath V., Rand Dasaradan B.S.; ‘A Navel Core attachment in Ring frame’, International Conference organized by Kumaraguru College of Technology and Texas Tech University, USA (2007) pp. 18-20.
  • 30. Kim E.A., Han E.G., Oh K.W., Na J.G.; Effects of Catalyst Accelerator on Elec - tromagnetic Shielding in Nonelectrolytic Cu-plated fabrics, J. Appl. Phys., Vol. 87, No. 9 (2000) pp. 4984-4986.
  • 31. French P.W., Penny R., Laurence J.A., McKenzie D.R.; Mobile Phones, Heat Shock Proteins and Cancer, Differentiation, Vol. 67 (2000) pp. 93-97.
  • 32. Leverkusen H.E.; Metallized Fibers and Textile Fabrics, Melliand Textiberichte (English edition), Vol. 10, No. 4 (1981) pp. 366-369.
  • 33. ASTM D-4935, “Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials,” 1989 Annual Book of ASTM Standards, pp. 448–456.
  • 34. Levy Stewart R.; Recent FCC Shielding Regulation and the Metal Finisher, Met Finish, Vol. 7 (1983) pp. 21–23.
  • 35. Wang Y., Jing X.; Intrinsically Conducting Polymers for Electromagnetic Interference Shielding, Polym. Adv. Technol. Vol. 16 (2005) pp. 344-351.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-91d71970-ed78-422a-965b-96edce7c6ee4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.