Automatic speed control of DC series motor by using Arduino

• Autorzy: Hamoodi Ali N. , Mohammed Rasha A. , Hamoodi Safwan A.

Identyfikatory

DOI

10.15199/48.2023.03.24

Warianty tytułu

PL

Automatyczna kontrola prędkości silnika serii DC za pomocą Arduino

• Języki publikacji: EN

Abstrakty

EN

The purpose of this project was to design and implement an aped control of a direct-current (DC) series motor. The Arduino UNO kit was used with four resistance armature control, and the approaches available with the Arduino kit enabled us to build this connection and measure the speed in a straightforward manner. This speed was measured using a speed meter (Autonics MP5w). Traditional armature resistance controls and also Arduino armature resistance controls were used. For each example, the speed readings were recorded. Finally, it was found that the Arduino control approach is less complicated than the old method.

PL

Celem tego projektu było zaprojektowanie i wykonanie sterowania silnika szeregowego prądu stałego (DC). Zestaw Arduino UNO został użyty z czterema opornikami sterującymi twornikiem, a podejścia dostępne w zestawie Arduino umożliwiły nam zbudowanie tego połączenia i zmierzenie prędkości w prosty sposób. Ta prędkość została zmierzona za pomocą prędkościomierza (Autonics MP5w). Zastosowano tradycyjne regulatory rezystancji twornika, a także regulatory rezystancji twornika Arduino. Dla każdego przykładu rejestrowano odczyty prędkości. Ostatecznie stwierdzono, że podejście do sterowania Arduino jest mniej skomplikowane niż stara metoda.

Słowa kluczowe

EN

resistance armature control; series DC motor; timer setting code; Arduino code; speed control; Arduino UNO

PL

sterowanie prędkością; silnik DC; Arduino

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2023
• Tom: R. 99, nr 3
• Strony: 137--141
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Hamoodi Ali N.

• Northern Technical University, Iraq

• https://orcid.org/0000-0003-0991-3538

autor

Mohammed Rasha A.

• Northern Technical University, Iraq

• https://orcid.org/0000-0001-9346-5680

autor

Hamoodi Safwan A.

• Northern Technical University, Iraq

• https://orcid.org/0000-0003-1742-6959

Bibliografia

• [1] Jesús U., Liceaga C., Irma I. Siller A., Jaimes P., Roberto A., Alcántara R. Identification and Real Time Speed Control of a Series DC Motor, Mathematical Problems in Engineering Volume 2017, Article ID 7348263, 11 pages https://doi.org/10.1155/2017/7348263.
• [2] Mane B., Koli Rohan B, Bhosale Sushilraje S, Jogdand Vishakha V, Arduino Based Speed Control of DC Motor by Using LabVIEW, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 5, May 2017.
• [3] Harshada Bhojane, Pooja Bhore, Rohit Magar, GSM based speed control of DC motor for Conveyor System, International Engineering Research Journal (IERJ), Special Issue Page 127-130, 2020 ISSN 2395-1621.
• [4] Safwan A. Hamoodi, Ibrahim I. Sheet, Rasha A. Mohammed, A Comparison between PID controller and ANN controller for speed control of DC Motor, 2nd International Conference onElectrical, Communication, Computer, Power and Control Engineering ICECCPCE19, 13-14 February, 2019 | Mosul, Iraq.
• [5] Ahmed A. Ali, Samar M. Abdullah,Mohamed O. Babiker, Abdulmajeed A. Abdullatif, DC-Motor Control of Speed Using Fuzzy-Pid Controller, Sudan University of Science and Technology College of Engineering Electrical Engineering Department, September 2017.
• [6] Rupesh Kumar, Mritunjoy Ray, Srideep Basak, Titas Ray, Speed Control of DC Motor Using Pulse Width Modulation, RCC Institute of Information Technology Canal South Road, Beliaghata, Kolkata – 700015, West Bengal Maulana Abul Kalam Azad University of Technology (MAKAUT) 2019.
• [7] Safwan A. Hamoodi, Rasha A. Mohammed, Bashar M. Salih, DC Motor Speed Control Using PID Controller Implementation by Simulink and Practical, International Journal of Electrical Engineering. ISSN 0974-2158 Volume 11, Number 1 (2018), pp. 39-49 © International Research Publication House http://www.irphouse.com
• [8] B.Venkata Prasanth, V.Venkata Swathi, N.Vamsi, CH.Sai Ganesh, SPEED CONTROL OF BLDC MOTOR USING ARDUINO & PWM TECHNIQUE, Compliance Engineering Journal, Volume 12, Issue 7, 2021.
• [9] Livinti Petrua, Ghandour Mazen, PWM Control of a DC Motor Used to Drive a Conveyor Belt, 25th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2014, Procedia Engineering 100 (2015) 299 – 304.
• [10] Abdul ghani.A.Razak, Rasha A. Mohammed, Design and Implementation of Differential Relay Based on Microcontroller to Protect Power Transformers, Journal engineer and technology, vol 36,2018.
• [11] Shailesh J. Parmar, Mital S. Zala, Ishita S. Thaker, Ketan M. Solanki, Design and Development of Stepper Motor Position Control using Arduino Mega 2560, IJSTE - International Journal of Science Technology & Engineering | Volume 3 | Issue 09 | March 2017 ISSN (online): 2349-784X.
• [12] Rasha A., Safwan A., Ali N., Comparison between two calculation methods for designing a stand-alone PV system according to Mosul city basemap, Open Engineering, 5 (2021), No. 11, 782–789.
• [13] S. Mehta and J. Chiasson, “Nonlinear control of a series DC motor: theory and experiment,” IEEE Transactions on Industrial Electronics, vol. 45, no. 1, pp. 134–141, 1998.
• [14] I. I. Siller-Alcala, J. U. Liceaga-Castro, A. Ferreyra-Ramırez, R. Alcantara Ramırez, and J. Jaimes-Ponce, “Speed nonlinear predictive control of a series DC motor for bidirectional operation,” in Recent Researches in Mathematical Methods in Electrical Engineering and Computer Science, pp. 182–187, WSEAS Press, 2011.
• [15] L. Amet, M. Ghanes, and J.-P. Barbot, “Super Twisting based step-by-step observer for a DC series motor: experimental results,” in Proceedings of the IEEE International Conference on Control Applications (CCA) Part of 2013 IEEE Multi-Conference on Systems and Control, Saint Petersburg, Russia, 2013.
• [16] Safwan A., Ali N, Farah I., Armature Control of a DC MotorBased on Programmable Logic Controller, PRZEGLĄD ELEKTROTECHNICZNY, ISSN 0033-2097, R. 98 NR 5/2022, doi:10.15199/48.2022.05.20.
• [17] Pathik A. Kapadiya, Ishan R. Shah, Nirav D. Mehta: STUDY AND IMPLEMENTATION OF DC DRIVE USING PIC16F877A MICROCONTROLLER, International Journal Research in Engineering and Technology, Volume: 03 Issue: 05 | May 2014, Available.
• [18] Shinde Krishnat Arvind, Tarate Akshay Arun, Taur Sandip Madhukar, Jayashree Deka: Speed Control of DC Motor using PIC 16F877A Microcontroller, Multidisciplinary Journal of Research in Engineering and Technology, Vol. 2, Pg. 223-234.
• [19] Md. Selim Reza, Md. Abdullah Al Mamun, “Design and Development of LabVIEW Based DC Motor Speed and Direction Control System”, International Journal of EngineeringResearch & Technology (IJERT), ISSN: 2278-0181, 4(2015), No. 5, 133-141.
• [20] Pratap V., Neelam P., Chandrakant K. “Real Time DC Motor Speed Control using PID Controller in LabVIEW”, 3(2014), No. 9, 76-83.
• [21] Safwan A., Ahmeed A., Ali N. Studying Performance Evaluation of Hybrid E-bike Using Solar Photovoltaic System,” Bulletin of Electrical Engineering and Informatics, 11(2022), No.1, 59-67.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).