Nanocrystalline TiO2 Powder Prepared by Sol-Gel Method for Dye-Sensitized Solar Cells

• Autorzy: Dobrzański L. A. , Szindler M. M. , Szindler M. , Lukaszkowicz K. , Drygała A. , Prokopiuk vel Prokopowicz M.

Identyfikatory

DOI

10.1515/amm-2016-0140

• Języki publikacji: EN

Abstrakty

EN

In this study titanium dioxide nanopowder has been manufactured and examined. Nanocrystalline TiO₂ powder has been obtained by hydrolysis and peptization of a solution of titanium isopropoxide and isopropanol. Subsequently, produced powder has been subjected to structural analysis by using a transmission electron microscope, X-ray diffractometer, and Raman spectrometer. For comparison purposes, a commercially available titanium dioxide powder (i.e. titanium white) was also used. Thin layers have been made from this powder and further have been examined by using a UV/VIS spectrometer. Completed research shows the nanocrystalline structure of obtained layers and their good properties such as absorbance at the range of wavelength equal 200 - 1000 nm.

Słowa kluczowe

EN

sol-gel; nanopowder; titanium dioxide; dye-sensitized solar cell

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 833--836
• Opis fizyczny: Bibliogr. 12 poz., rys.

Twórcy

autor

Dobrzański L. A.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Szindler M. M.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Szindler M.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Lukaszkowicz K.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Drygała A.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Prokopiuk vel Prokopowicz M.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] J. Domaradzki, A. Borkowska, D. Kaczmarek, E.L. Prociow, Opt. Appl. 35 (3), 425-430 (2005).
• [2] A. Borkowska, J. Domaradzki, D. Kaczmarek, Opt. Appl. 37 (1-2), 117-122 (2007).
• [3] M. Mazur, D. Wojcieszak, J. Domaradzki, D. Kaczmarek, S. Song, F. Placido, Opto-Electron. Rev. 21 (2), 233-238 (2013).
• [4] E. Krysiak, A. Wypych-Puszkarz, K. Krysiak, G. Nowaczyk, M. Makrocka-Rydzyk, S. Jurga, J. Ulanski, Synth. Met. 209, 150-157 (2015).
• [5] A. McEvoy, T. Markvart, L. Castaner, Practical Handbook of Photovoltaics. Fundamentals and Applications, 2012 Academic Press, Waltham.
• [6] D.B. Warheit, E.M. Donner, Food and Chemical Toxicology 85, 138-147 (2015).
• [7] Y. Ma, X. Wang, Y. Jia, X. Chen, H. Han, C. Li, Chem. Rev. 114, (19), 9987-10043 (2014).
• [8] Z. Li, B. Hou, Y. Xu, D. Wu, Y. Sun, J. Colloid Interf. Sci. 288, 149-154 (2005).
• [9] S. Mahshid, M. Asakari, M.S. Ghamsari, J. Mater. Process. Tech. 189, 296-300 (2007).
• [10] H. D. Jang., S.-K. Kim, Mater. Res. Bull. 36, 627-637 (2001).
• [11] K. D. Kim, H.T. Kim, Powder Technol. 119, 164-172 (2001).
• [12] M. Stoller, L. Miranda, A. Chianese, Chem. Eng. Trans. 17, 993-998 (2009).