PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Badania porównawcze odporności korozyjnej stopowej stali austenitycznej AISI 304L (EN 1.4307) po walcowaniu na zimno oraz po pasywowaniu w kwasie azotowym HNO3

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Comparative studies of corrosion resistance of AISI 304L (EN 1.4307) austenitic stainless steel after cold rolling and passivation in nitric acid HNO3
Konferencja
Forum motoryzacji (18 ; 12.06.2015 ; Słupsk, Polska)
Języki publikacji
PL
Abstrakty
PL
Niniejszy artykuł przedstawia badanie porównawcze odporności korozyjnej austenitycznej stali stopowej AISI 304L (EN 1.4307). Wyniki badań ilustrują odporność na korozję wżerową stali po walcowaniu na zimno oraz pasywowaniu w różnych warunkach. Badania elektrochemiczne przeprowadzone były dla trzech grup próbek: po walcowaniu na zimno, oraz po walcowaniu na zimno i pasywowaniu w kwasie azotowym (V) w temperaturach 20°C i 60°C. W każdym z wymienionych z przypadków zaobserwowano zjawisko korozji wżerowej. Największą odporność na korozję wżerową wykazała próbka walcowana na zimno poddana pasywowaniu w temperaturze 60°C.
EN
This paper presents a comparative study of the corrosion resistance of austenitic steels AISI 304L (EN 1.4307). Studies show a resistance to pitting corrosion of steel after cold rolling and passivation under different conditions. Electrochemical studies were carried out on three groups of samples: after cold rolling, after cold rolling and passivation in nitric acid (V) at temperatures of 20°C and 60°C. In each of these cases has been noted the phenomenon of pitting corrosion. The highest resistance to pitting corrosion was observed in the samples subjected to cold rolling and passivation at 60°C.
Rocznik
Strony
191--194
Opis fizyczny
Bibliogr. 20 poz., tab., rys.
Twórcy
autor
  • Politechnika Koszalińska, Wydział Mechaniczny
  • Politechnika Koszalińska, Wydział Mechaniczny
autor
  • Politechnika Koszalińska, Wydział Mechaniczny
autor
  • Politechnika Koszalińska, Wydział Mechaniczny
Bibliografia
  • 1. Stainless Steel 1.4404 - 316L, Technical Information. Aalco Metals Ltd (2013).
  • 2. Rokosz K.: Polerowanie elektrochemiczne stali w polu magnetycznym. Wyd. Uczeln. Politechniki Koszalińskiej, Koszalin (2012).
  • 3. Sedriks A.J.: Corrosion of Stainless Steels, Second Edition, A Wiley-Interscience Publication, John Wiley & Sons, New York/ Chichester/ Brisbane/ Toronto/ Singapore, printed in the USA (1996).
  • 4. Hryniewicz T., Rokicki R., Rokosz K.: Surface characterization of AISI 316L biomaterials obtained by electropolishing in a magnetic field. Surface & Coatings Technology 202(9) (2008).
  • 5. Hryniewicz T., Rokosz K., Rokicki R.: Electrochemical and XPS Studies of AISI 316L Stainless Steel after Electropolishing in a Magnetic Field. Corrosion Science 50(9) (2008).
  • 6. Hryniewicz T., Rokosz K.: Highlights of magnetoelectro-polishing, Frontiers in Materials: Corrosion Research 1(3) (2014). (Inaugural Article); DOI: 10.3389/fmats.2014.00003.
  • 7. Hryniewicz T., Rokicki R., Rokosz K.: Corrosion Characteristics of Medical Grade AISI 316L Stainless Steel Surface after Electropolishing in a Magnetic Field. CORROSION (The Journal of Science and Engineering), Corrosion Science Section 64(8) (2008).
  • 8. Rokosz K., Hryniewicz T.: Pitting corrosion resistance of AISI 316L SS in Ringer’s solution after magneto-electrochemical polishing. CORROSION –The Journal of Science and Engineering 66(3) (2010).
  • 9. Hryniewicz T., Rokosz K.: Analysis of XPS results of AISI 316L SS electropolished and magnetoelectropolished at varying conditions. Surface and Coatings Technology 204(16-17) (2010).
  • 10. Rokosz K., Hryniewicz T., Raaen S.: Characterization of Passive Film Formed on AISI 316L Stainless Steel after Magnetoelectropolishing in a Broad Range of Polarization Parameters. Steel Research International 83(9) (2012).
  • 11. Rokosz K.: Pomiar XPS składu chemicznego warstwy wierzchniej powstałej na stali austenitycznej AISI 316L SS po elektrochemicznym polerowaniu w polu magnetycznym (XPS measurement of chemical composition of surface layer formed on austenitic AISI 316L SS after electrochemical polishing in a magnetic field). PAK 57(5) (2011).
  • 12. Rokosz K., Hryniewicz T.: Cr/Fe Ratio by XPS Spectra of Magnetoelectropolished AISI 316L SS using Linear, Shirley and Tougaard Methods of Background Subtraction. Advances in Materials Sciences 13(1) (2013).
  • 13. Rokosz K., Hryniewicz T.: XPS measurements of passive film formed on AISI 316L SS after electropolishing in a magnetic field (MEP). Advances in Materials Science 12(4) (2013).
  • 14. Hryniewicz T., Rokosz K.: Corrosion resistance of magneto-electropolished AISI 316L SS biomaterial, Anti-Corrosion Methods and Materials, 61(2) (2014).
  • 15. Rokosz K., Hryniewicz T.: Magnetoelectropolishing: modern and effective method of AISI 316L SS surface finishing. PAK (Measurement Automation and Monitoring) 59(12) (2013).
  • 16. Hryniewicz T., Rokosz K.: Significant improvement of AISI 316L SS biomaterial surface after magnetoelectropolishing MEP: XPS measurements. PAK (Measurement Automation and Monitoring) 59(12) (2013).
  • 17. Hryniewicz T., Rokosz K., Rokicki R.: Magnetic Fields for Electropolishing Improvement: Materials and Systems. International Letters of Chemistry, Physics and Astronomy 4 (2014).
  • 18. Hryniewicz T., Rokosz K.: Corrosion resistance of magneto-electropolished AISI 316L SS biomaterial, Anti-Corrosion Methods and Materials, 61(2) (2014) 57-64.
  • 19. Kusnerova M., Valiček J., Harničarova M., Hryniewicz T., Rokosz K., Palkova Z., Vaclavik V., Repka M., Bendova M.: A Proposal for Simplifying the Method of Evaluation of Uncertainties in Measurement Results, Measurement Science Review, 13(1) (2013) 1-6.
  • 20. StatSoft, Inc. (2011). STATISTICA (data analysis software system), version 10. www.statsoft.com.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-91580bec-b8dc-42e3-b9ae-610ab2e759eb
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.