PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
Tytuł artykułu

Crucial problems of powertrain control in electric vehicles and hybrid electric vehicles

Autorzy
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This work deals with how to improve the energy efficiency, the safety, reliability and the driving comfort by powertrain control in EVs and HEVs from three aspects: 1) How to improve the energy efficiency: Using two cases study in Chapter 2 to present the idea about how to improve the powertrain efficiency of EVs and HEVs. On the other hand, the simulation study shows the current solution in EVs of increasing the driving range by enlarging battery pack size is at the expense of EVs energy efficiency, not to mention the increasing cost and the increasing difficulty of battery management system (BMS); 2) How to improve the safety and reliability by BMS: Battery is the most expensive component both in pure electric and hybrid powertrain. People expect the battery as a green energy solution to liberate society from the dependency of fossil fuel. The reality is that battery has many limitations and battery performance strongly depends on how the batteries are used and also on the environmental conditions. BMS should be designed to keep the battery within a safe operating window and to ensure a long cycle life based on battery limitations and performance characteristics. The popular used Thevenin battery model is analyzed to be linear and to be an improper model for state of charge (SOC) estimation. The nonlinear dynamic battery model (developed by Prof. Szumanwoski in 1980's) is used to develop the Li-ion battery model in numerical way. Finally an improved algorithm for battery SOC estimation is proposed in Chapter 3. 3) How to improve the driving comfort and reliability: a design methodology based on the co-design of scheduling and control is proposed in Chapter 4. Both the simulation and HIL test results show the method can effectively deal with the problem resulted from network-induced delays and network congestion, and can ensure the reliable and dependable control system for electric powertrain system in EVs and HEVs. This work also shows that the powertrain design and its control for EVs and HEVs are highly multidisciplinary, which requires researchers and engineers to have multidisciplinary knowledge or to cooperate closely. When people from different disciplines try to understand basic problems from other disciplines and work together closely, they may easily find the reasons and solutions to the problems. Nowadays EVs and HEVs are just at the beginning of mass production. Some unreliable driving phenomena have reported to appear during EVs operating, engineers haven't found the reason yet. As the number of EVs and HEVs entering into the market increases, more and more technology challenges will appear. For researchers it is also very important to work together with vehicle engineers to find the real reason of unreliable driving phenomena, and to use the research results to resolve the problems. Currently the auto industry is undergoing a radical transformation to phase out conventional vehicles (CVs) powered solely by internal combustion engines (ICEs.) Opportunities and challenges exist both for the auto industry and for auto research institutions. The Author believes that the trend for future vehicle powertrain will be all-electric and hybrid, and the current powertrain technology for EVs and HEVs has many aspects and potential to improve. In next decades, the development of powertrain for EVs and HEVs will focus on how to increase the energy efficiency, improve the safety, reliability and driving comfort, at the same time to make the powertrain more compact.
Rocznik
Tom
Strony
3--76
Opis fizyczny
Bibliogr. 48 poz., rys., tab., wykr.
Twórcy
autor
  • Wydział Samochodów i Maszyn Roboczych
Bibliografia
  • [1] M. Ehsani, Y. Gao, A. Emadi, Modem electric, hybrid electric, and fuel cell vehicles: fundamentals, theory, and design, CRC Press, ©2010.
  • [2] J. Fyffe, The Reports of My Death Have Been Greatly Exaggerated - An Internal Combustion Engine's Story, Sustainable Transportation, Stanford Energy Journal, Issue 4, 2014.
  • [3] http://www.asahi-net.or.jp/~pu4i-aok/cooldata2/hybridcar/hybridcare.htm , February, 2019.
  • [4] Dominic A. Notter, Marcel Gauch, Rolf Widmer, Patrick Wӓger, Anna Stamp, Rainer Zah, and Hans-Jörg Althaus, Contribution of Li-Ion Batteries to the Environmental Impact of Electric Vehicles, Environmental Science & Technology 2010 44(17), pp. 6550-6556.
  • [5] https://batteryuniversity.com/learn/article/ultra_fast_charging, February, 2019.
  • [6] Szumanowski Antoni, Piórkowski Piotr, Chang Yuhua, Batteries and Ultracapacitors Set in Hybrid Propulsion System, IEEE INTERNATIONAL CONFERENCE ON POWER ENGINEERING POWERENG 2007, ISBN 978-1-4244-0894-8, pp. 122-127.
  • [7] Hongwen He, Rui Xiong, Chang Yuhua, Dynamic Modeling and Simulation on a Hybrid Power System for Electric Vehicle Applications, Energies, vol. 3, no. 11, 2010, pp. 1821-1830.
  • [8] Allen Fuhs, Hybrid Vehicles and the Future of Personal Transportation, CRC Press, 2008, ISBN-10: 1-4200-7534-9, ISBN-13: 978-1-4200-7534-2.
  • [9] Szumanowski Antoni, Chang Yuhua, Piórkowski Piotr, Hajduga Arkadiusz: Hybrid electric vehicle drives design-edition based on urban buses, 2006, Instytut Technologii Eksploatacji, ISBN 83-7204-456-2.
  • [10] Szumanowski Antoni: Hybrid electric power train engineering and technology: modeling, control, and simulation, 2013, IGI Global, ISBN 978-1-4666-4042-9.
  • [11] Grzeliński Michał: The influence of proper transmission ratio adjustment on the driving range of an electric bus (Diploma work tutored by Chang Yuhua), The Faculty of Automotive and Construction Machinery Engineering at Warsaw University of Technology, 2018.
  • [12] Szumanowski Antoni, Hajduga Arkadiusz, Piórkowski Piotr, Chang Yuhua: Hybrid drivertrain of vehicle with ICE and generator, Invention, Protected, Application number: PL 378822, Patent/rights number: 378822, Application date: 26-01-2006, Patent (decision) date: 23-03-2011.
  • [13] Szumanowski Antoni, Chang Yuhua, Piórkowski Piotr, Hajduga Arkadiusz: Hybrid drivertrain, Invention, Accepted, Application number: 380718, Patent/rights number: 207072, Application date: 29-09-2006, Patent (decision) date: 29-10-2010.
  • [14] Szumanowski Antoni, Hajduga Arkadiusz, Chang Yuhua: Hybrid drivertrain, Invention, Protected, Application number: 382457, Patent/rights number: P210004, Application date: 18-05-2007, Patent (decision) date: 30-11-2011.
  • [15] Chang Yuhua, Liu Zhiyin: Clutch-brake System Control Method in Hybrid Power Train with Planetary Transmission, Zeszyty Naukowe Instytutu Pojazdów, vol. 5, no. 109, 2016, pp. 17-30.
  • [16] Szumanowski Antoni, Chang Yuhua, Liu Zhiyin [et al.]: Hybrid powertrain efficiency improvement by using electromagnetically controlled double-clutch transmission, International Journal of Vehicle Design, vol. 76, no. 1/2/3/4,2018, pp. 1-19.
  • [17] https://www.mpoweruk.com/lithium_failures.htm, February, 2019.
  • [18] http://www.batteryuniversity.com/partone-16a.htm, February, 2019.
  • [19] https://optibike.com/lithium-battery-performance-in-cold-temperatures/, February, 2019.
  • [20] http://www.tamuz-ele.com/examination-assessment-lithium-ion-battery-life/, February, 2019.
  • [21] Christian von Lüders, Veronika Zinth, Simon V. Erhard, Patrick J. Osswald, ... Andreas Jossen, Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction, Journal of Power Sources, Volume 342, 28 February 2017, pp. 17-23.
  • [22] Szumanowski Antoni, Chang Yuhua, Piórkowski Piotr, Hajduga Arkadiusz, Hybrid electric vehicle drives design - edition based on urban buses, 2006, Instytut Technologii Eksploatacji, ISBN 83-7204-456-2.
  • [23] Chang Yuhua (Ph.D diploma work, 2007) Analysis of energy management requirements including NiMH or Li-ion baterry in hybrid urban bus drive, the Faculty of Automotive and Construction Machinery Engineering at Warsaw University of Technology, 2007.
  • [24] Szumanowski Antoni, Chang Yuhua, Battery Management System Based on Battery Nonlinear Dynamics Modeling, IEEE Transactions on Vehicular Technology, vol. 57, no. 3, 2008, pp. 1425-1432.
  • [25] He, H.; Xiong, R.; Fan, J. Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental Approach. Energies 2011, 4, 582-598.
  • [26] H He, R Xiong, X Zhang, F Sun, JX Fan, State-of-charge estimation of the lithium-ion battery using an adaptive extended Kalman filter based on an improved Thevenin model, IEEE Transactions on Vehicular Technology, 2011.
  • [27] R Xiong, H He, F Sun, X Liu, Z Liu, Model-based state of charge and peak power capability joint estimation of lithium-ion battery in plug-in hybrid electric vehicles, Journal of power sources, 2013.
  • [28] V. Pop, H.J. Bergveld, P.H.L.Notten, J.H.G. Op het Veld, P.P.L. Regtien, Accuracy analysis of the State-of-Charge and remaining run-time determination for lithium-ion batteries, Measurement, Volume 42, Issue 8, October 2009, pp. 1131-1138.
  • [29] Wanke Cao, Y.W., Yuhua Chang, Zhiyin Liu, Cheng Lin, Qiang Song, Speed Synchronization Control for Integrated Automotive Motor-Transmission Powertrains over CAN through A Codesign Methodology. IEEE Access, 2018.
  • [30] Wanke Cao, H.L., Cheng Lin, Yuhua Chang, Zhiyin Liu, Antoni Szumanowski, Co-Design Based Lateral Motion Control of All-Wheel-Independent-Drive Electric Vehicles with Network Congestion. Energies, 2017. 10(10).
  • [31] Wanke Cao, Z.L., Yuhua Chang, Antoni Szumanowski, Direct Yaw-Moment Control of All-Wheel-Independent-Drive Electric Vehicles with Network-Induced Delays through Parameter-Dependent Fuzzy SMC Approach, in Mathematical Problems in Engineering. 2017. p. 15.
  • [32] Shuai, Z., H. Zhang, J. Wang, J. Li, and M. Ouyang, Lateral motion control for four-wheel-independent-drive electric vehicles using optimal torque allocation and dynamic message priority scheduling. Control Engineering Practice, 2014. 24: pp. 55-66.
  • [33] F.Caruntu, C., M. Lazar, R.H. Gielen, P.P.J.v.d. Bosch, and S.D. Cairano, Lyapunov based predictive control of vehicle drivetrains over CAN. Control Engineering Practice, 2013. 21: pp. 1884-1898.
  • [34] Plaga, S., N. Tohan, and A. Grzemba, Investigation in Battery-Electric-Car CAN Identifiers for Researching Advanced Driver Assistance Systems, in 2012 International Conference on Applied Electronics, J. Pinker, Editor. 2012. pp. 211-214.
  • [35] Cao Wanke, L.H., Lin Cheng, Chang Yuhua, Liu Zhiyin, Szumanowski Antoni, Speed Synchronization Control of Integrated Motor-Transmission Powertrain over CAN through Active Period-Scheduling Approach. Energies, 2017. 10(11): p. 1831.
  • [36] Song, H., L. Yu, and W.-A. Zhang, Stabilisation of networked control systems with communication constraints and multiple distributed transmission delays. IEt Control Theory and Applications, 2008. 3(10): pp. 1307-1316.
  • [37] Shuai, Z., H. Zhang, J. Wang, J. Li, and M. Ouyang, Combined AFS and DYC Control of Four Wheel Independent Drive Electric Vehicles over CAN network with Time-Varying Delays. IEEE Transactions on Vehicular Technology, 2014. 63(2): pp. 591-602.
  • [38] Wanke, C., Y. Zhihao, and L. Cheng, The dynamic studies of dual-motor independent drive electric vehicle with network control. Proceedings of IEEE Transportation Electrification Conference and Expo, 2014.
  • [39] Zhang, W., M. S.Branicky, and S. M.Phillips, Stability of networked control systems. IEEE Control Systems Magazine, 2001(2): pp. 83-99.
  • [40] Hsu, C.H., K.C. Chang, Y.C. Ou, K.Y. Liao, C.L. Wey, and Ieee, On the Implemenation of CAN Buses to Battery Management Systems, in 2011 Ieee 54th International Midwest Symposium on Circuits and Systems. 2011.
  • [41] Song, D.P. and X.F. Wan, The application of CAN Bus in the electric vehicle control and battery management system. 2011 Second Etp/Iita Conference on Telecommunication and Information, ed. M. Zhou. 2011. 314-317.
  • [42] Thu, X., H. Zhang, and Z. Fang, Speed synchronization control for integrated automotive motor-transmission powertrain system with random delays. Mechanical Systems and Signal Processing, 2015. 64-65: pp. 46-57.
  • [43] Zhu, X.Y., H. Zhang, D.P. Cao, and Z.D. Fang, Robust control of integrated motor-transmission powertrain system over controller area network for automotive applications, in Mechanical Systems and Signal Processing. 2015. pp. 15-28.
  • [44] Chyuan-Yow, T. and Y. Chih-Hsien, Advanced shifting control of synchronizar mechanisms for clutchless automatic manual transmission in an electric vehicle. Mechanism and machine theory, 2015. 84: pp. 37-56.
  • [45] Caruntu, C.F., M. Lazar, R.H. Gielen, P.P.J.v.d. Bosch, and S.D. Cairano, Lyapunov based predictive control of vehicle drivetrains over CAN. Control Engineering Practice, 2013. 21(12): pp. 1884-1898.
  • [46] Yu, C.-H., C.-Y. Tseng, and C.-P. Wang. Smooth gear-change control for EV Clutchless Automatic Manual Transmission. in IEEE/ASME International Conference on Advanced Intelligent Mechatronics. 2012.
  • [47] Yu, C.-H. and C.-Y. Tseng, Research on gear-change control technology for the clutchless automatic-manual transmission of an electric vehicle. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 2013. 227(10): pp. 1446-1458.
  • [48] K.Tindell, A.Burns, and A.J.Wellings, Calculating Controller Area Network (CAN) Message Response Times. Control Engineering Practice, 1995. 3(8): pp. 1163-1169.
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-912baeee-267e-45d7-a00f-80f2abb67f59
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.