PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Analysis of Ti6Al4V P/M Properties Under Thermomechanical Compression Tests

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Since titanium powder metallurgy poses opportunities for the manufacture of a range of components, there now exists the need to establish its performance characteristics under industrial conditions that these components need to operate under. In line with this, there is a need to analysing amongst others the mechanical properties of Ti6Al4V P/M [1, 5] under various thermomechanical conditions and compression tests. The main objective of the research is to study and compare the properties after forging of high quality Ti6Al4V powder metallurgy alloy with that of titanium ingot. Both samples has been manufactured under the same thermo mechanical conditions. P/M alloy will be prepared from the mixture of elemental powders, and will have the chemical composition of that of ingot Ti6Al4V alloy as per ASTM 1580-1 standard. Powder mixtures will be fully densified by hot compaction under precisely controlled conditions using the Thermal Technology Inc. press at AGH University of Science and Technology in Poland. Various physical tests will be conducted including mechanical property tests and microstructural analysis. Additionally simulations will be performed using simulation software, GForm ™ , using parameters used on actual forgings. Results will be compared to physical tests performed earlier.
Rocznik
Strony
149--152
Opis fizyczny
Bibliogr. 7 poz., rys., tab., wykr.
Twórcy
autor
  • AGH University of Science and Technology, Department of Foundry, Krakow, Poland
autor
  • AGH University of Science and Technology, Department of Foundry, Krakow, Poland
Bibliografia
  • [1] Boyer, R., Collings, E.W., Welsch, G (eds). (1994). Materials Properties Handbook: Titanium Alloys, vol. 4. pp. 497-498, 517-530. United States of America. ASM International.
  • [2] Gronostajski, Z., Bandoła, P., Skubiszewski, T. (2010). Argon-shielded hot pressing of titanium alloy (Ti6Al4V) powders. Acta of Bioengineering and Biomechanics Original paper. Institute of Production Engineering and Automation Vol. 12, No. 1.
  • [3] Hurless, B.E., & Froes, F.H. (2002). Lowering the cost of Titanium. The AMPTIAC Quaterly Volume 6.
  • [4] Kraft, E. H. (2004). Summary of Emerging Titanium Cost Reduction Technologies. EHK Technologies; Oak Ridge National Laboratory.
  • [5] Technical Datasheet. Carpenter. Ti6Al4V alloy. Cartech.ides.com/datasheet.aspx. [29 July 2013].
  • [6] Tasdemirci, A., Hızal, A., Altındis¸ M., Hall, I.W., Guden, M. (2007). The effect of strain rate on the compressive deformation behaviour of a sintered Ti6Al4V powder compact. Department of Mechanical Engineering, Izmir Institute of Technology, Gulbahce Koyu, Urla, Izmir, Turkey. Department of Mechanical Engineering, University of Delaware, Newark, DE, USA. Center for Materials Research, Izmir Institute of Technology, Gulbahce Koyu, Urla, Izmir,Turkey.
  • [7] Wojtaszek, M., Sleboda, T. (2013). Thermomechanical processing of P/M Ti6Al4V alloy. AGH University of Science and Technology, Metals Engineering and Industrial Computer Science Dept.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-90c35c26-3330-47d1-bfd5-974a84b377c4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.