Effect of the Shot Peening on Surface Properties and Tribological Performance of Ti-6Al-4V Alloy Produced by Means of DMLS Technology

• Autorzy: Żebrowski R. , Walczak M.

Identyfikatory

DOI

10.24425/amm.2019.126263

• Języki publikacji: EN

Abstrakty

EN

The purpose of the present paper was to investigate the effect of shot peening on the condition of the surface layer and abrasion resistance of specimens made of Ti-6Al-4V titanium alloy produced by Direct Metal Laser Sintering (DMLS) process. The specimens have been produced by means of EOSINT M280 system dedicated for laser sintering of metal powders and their surfaces have been subjected to the shot peening process under three different working pressures (0.2, 0.3 and 0.4 MPa) and by means of three different media i.e. CrNi steel shot, crushed nut shells and ceramic balls. The specimens have been subjected to profilometric analysis, to SEM examinations, microhardness tests and to tribological tests on ball-on-disc stand in Ringer fluid environment. The general results of all tests indicate to favourable effect of shot peening process on the hardness and tribological performance of titanium alloy.

Słowa kluczowe

EN

additive manufacturing; shot peening; titanium alloys; wear; tribology

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 1
• Strony: 377--386
• Opis fizyczny: Bibliogr. 20 poz., fot., rys., tab., wzory

Twórcy

autor

Żebrowski R.

• Center of Oncology of The Lublin Region St. John of Dukla, Department of General Surgery, 7 K. Jaczewskiego Str., Lublin 20-090, Poland

autor

Walczak M.

• Lublin University of Technology, Faculty of Mechanical Engineering, Department of Materials Engineering, Lublin, 36 Nadbystrzycka Str., Lublin 20-618, Poland

Bibliografia

• [1] J. Bieniaś, B. Surowska, A. Stoch, H. Matraszek, M. Walczak, Dent. Mater. 25 (9), 1128-1135 (2009).
• [2] M. Geetha, A. K. Singh, R. Asokamani, A. K. Gogia, Prog. Mater. Sci. 54 (3), 397-425 (2009).
• [3] M. Król, T. Tański, Arch. Metall. Mater. 61 (3), 1291-1296 (2016), DOI: 10.1515/amm-2016-0213
• [4] S. Jelliti, C. Richard, D. Retraint, T. Roland, M. Chemkhi, C. Demangel, Surf. Coat. Technol. 224, 82-87 (2013).
• [5] M. Walczak, K. Drozd, Current Issues in Pharmacy and Medical Sciences, 29 (4), 158-162 (2016), DOI: 10.1515/cipms-2016-0033
• [6] W. S.W. Haruna, N. S. Manam, M.S.I.N. Kamariah, S. Sharif, A. H. Zulkifly, I. Ahmad, H. Miura, Powder Technol. 331, 74-97 (2018).
• [7] G. Winiarski, A. Gontarz, Z. Pater, Arch. Civ. Mech. Eng. 15, 911-916 (2015), DOI: 10.1016/j.acme.2015.01.001
• [8] Z. Gronostajski, P. Bandoła, T. Skubiszewski, Acta Bioeng. Biomech., 12 (1), 41-46 (2010).
• [9] R. E. Śliwa, J. Bernaczek, G. Budzik, Key Eng. Mater. 687, 199-205 (2016), DOI: 10.4028/www.scientific.net/KEM.687.199
• [10] A. A. Ahmed, M. Mhaede, M. Wollmann, L. Wagner, Appl. Surf. Sci. 363, 50-58 (2016).
• [11] B.K.C. Ganesh, W. Sha, N. Ramanaiah, A. Krishnaiah, Materials and Design 56, 480-486 (2014).
• [12] Y. Kameyama, J. Komotori, J. Mater. Process. Tech. 209, 6146-6155 (2009). DOI:10.1016/j.jmatprotec.2009.08.010
• [13] R. Żebrowski, M. Walczak, T. Klepka, K. Pasierbiewicz, Eksploat. i Niezawodnosc – Maintenance and Reliability 21 (1), 46-53 (2019), DOI: 10.17531/ein.2019.1.6
• [14] L. Thijs, K. Kempen, J. P. Kruth, J. Van Humbeeck, Acta Mater. 61 (5), 1809-1819 (2013).
• [15] I. Yadroitsev, P. Krakhmalev, I. Yadroitsava, Additive Manufacturing 7, 45-56 (2015). DOI: 10.1016/j.addma.2014.12.007
• [16] S. Dai, Y. Zhu, Vacuum 125, 215-221 (2016).
• [17] H. Dong, T. Bell, Wear 225-229, 874-884 (1999).
• [18] J. Marciniak, Metallic biomaterials, in Błażewicz S., Stoch L. (Eds.), Biomaterias. Vol. 4, Akademicka Oficyna Wyd. Exit, Warszawa (2003).
• [19] A.C.L. Faria, R.C.S. Rodrigues, P.R.A.C. Claro, M.G.Ch. Mattos, R.F. Ribeiro, J. Mech. Behav. Biomed. 4 (8), 1873-1879 (2011). DOI: 10.1016/j.jmbbm.2011.06.004
• [20] F. Bartolomeu, M. Buciumeanu, M. M. Costa, N. Alves, M. Gasik, F. S. Silva, G. Mirand, J. Mech. Behav. Biomed. 89, 54-64 (2019).

Uwagi

EN

1. The project/research was financed in the framework of the project Lublin University of Technology-Regional Excellence Initiative, funded by the Polish Ministry of Science and Higher Education (contract no. 030/RID/2018/19).

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).