PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Zastosowanie taśm CFRP do wzmacniania stalowych elementów profilowanych na zimno

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
The use of CFRP tapes for reinforcement of cold-formed steel elements
Języki publikacji
PL
Abstrakty
PL
W niniejszej pracy przedstawiono wybrane zagadnienia związane ze wzmacnianiem stalowych elementów profilowanych na zimno taśmami CFRP. W pierwszej części pracy dokonano przeglądu literatury i przedstawiono podstawowe informacje dotyczące stalowych elementów cienkościennych profilowanych na zimno oraz materiałów kompozytowych CFRP, podkreślając zalety i wady wykorzystania ich do wzmacniania konstrukcji stalowych. Następnie przedstawiono opublikowane, własne badania naukowe dotyczące wpływu długości zakotwienia taśm CFRP i ich lokalizacji na nośność i efektywność wzmacniania stalowych belek cienkościennych typu sigma.
EN
This paper presents selected issues related to the reinforcement of cold-formed steel elements with CFRP tapes. In the first part of the work, the literature was reviewed and basic information on cold-formed thin-walled steel elements and CFRP composite materials, emphasizing the advantages and disadvantages of using them to reinforce steel structures was presented. Moreover, published, own scientific research on the influence of effective anchorage length of the CFRP tape and their location on the load capacity and on the effectiveness of strengthening thin-walled steel beams of the sigma type with CFRP composites was presented.
Czasopismo
Rocznik
Strony
55--60
Opis fizyczny
Bibliogr. 27 poz., il., tab.
Twórcy
  • Politechnika Lubelska
  • Politechnika Poznańska
Bibliografia
  • [1] Bambach M. R., 6-Strengthening of thin-walled (hollow) steel sections using fibre-reinforced polymer (FRP) composites. Rehabilitation of Metallic Civil Infrastructure Using Fiber Reinforced Polymer (FRP) Composites, 2014, str. 140-168
  • [2] Park J.-W., Yeom H.-L., Yoo J.-H., Axial loading tests and FEM analysis of slender square hollow section (SHS) stub columns strengthened with carbon fiber reinforced polymers, International Journal of Steel Structures 13(4)2013, str. 731-743
  • [3] Imran M., Mahendran M., Keerthan P., Experimental and numerical investigations of CFRP strengthened short SHS steel columns, Engineering Structures 175/2018, str. 879-894
  • [4] Bambach M. R., Jama H. H., Elchalakani M., Axial capacity and design of thin-walled steel SHS strengthened with CFRP. Thin Walled Structures 47(10)200, str. 1112-1121
  • [5] Bambach M. R., Elchalakani M., Plastic mechanism analysis of steel SHS strengthened with CFRP under large axial deformation, Thin-Walled Structures 45(2)2007, str. 159-170
  • [6] Bambach M. R., 6-Strengthening of thin-walled (hollow) steel sections using fibre-reinforced polymer (FRP) composites. Rehabilitation of Metallic Civil Infrastructure Using Fiber Reinforced Polymer (FRP) Composites, 2014, str. 140-168
  • [7] Silvestre N., Young B., Camotim D., Non-linear behavior and load-carrying capacity of CFRP-strengthened lipped channel steel columns, 2008
  • [8] Silvestre N., Camotim D., Young B., On the use of the EC3 and AISI specifications to estimate the ultimate load of CFRP-strengthened cold-formed steel lipped channel columns, Thin-Walled Structures 47(10)2009, str. 1102-1111
  • [9] Gosowski B., Skręcanie i zginanie otwartych elementów konstrukcji metalowych, 2004
  • [10] Piechnik S., Pręty cienkościenne - otwarte, Wydawnictwo Politechniki Krakowskiej, Kraków, 2000
  • [11] Gosowski B., Zginanie i skręcanie cienkościennych elementów konstrukcji metalowych, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław, 2015
  • [12] Kurzawa Z., Rzeszut K., Szumigała M., Stalowe konstrukcje prętowe. Część III, Wydawnictwo Politechniki Poznańskiej, Poznań, 2015
  • [13] Oswald M., Magnucki K., Optymalne projektowanie belek cienkościennych walcowanych na zimno o przekrojach otwartych, Agencja Reklamowa Comprint, Poznań, 2008
  • [14] Kałuża M., Bartosik T., Wzmacnianie konstrukcji budowlanych materiałami kompozytowymi FRP, Inżynier budownictwa 127, 04/2015
  • [15] Aleksandrowicz M., Podstawowe informacje o systemach wzmacniania konstrukcji budowlanych i inżynierskich za pomocą materiałów kompozytowych Sika CarboDur System, BzG 3. http://www.bzg.pl/node/282. 2005.
  • [16] Tawfik Q. H., Karunasena W. K., Use of CFRP for Rehabilitation of Steel Structures: a Review, Southern Region Engineering Conference, Toowoomba, Australia, 11-12 listopad 2010
  • [17] Linghoff D., Haghani R., Al-Emrani M., Carbon-fibre composites for strengthening steel structures, Thin-Walled Structures 47/2009, str. 1048-1058
  • [18] Mażulis J., Wrzesiński M., Bierońska K., Efekt wzmocnienia konstrukcji stalowych przy użyciu włókien węglowych, Przetwórstwo Tworzyw 6/2011, str. 475-478
  • [19] Deng J., Lee M. M. K., Behaviour under static loading of metallic beams reinforced with a bonded CFRP plate, Composite Structures 78/2007, str. 232-242
  • [20] Nozaka K., Shield C. K., Hajjar J. F., Effective bond length of carbon-fiber-reinforced polymer strips bonded to fatigued steel bridge I-girders, Journal of Bridge Engineering, ASCE, 10(2)2005, str. 195-205
  • [21] Jiao H., Zhao X.-L., CFRP strengthened butt-welded very high strength (vhs) circular steel tubes, Thin-Walled Structures 42/2004, str. 963-978
  • [22] Miller T. C., Chajes M. J., Mertz D. R., Hastings J. N., Strengthening of a steel bridge girder using CFRP plates, ASCE Journal of Bridge Engineering 6(6)2001, str. 514-522
  • [23] Kowal M., Wzmacnianie elementów stalowych kompozytami FRP, Politechnika Lubelska, Lublin, 2015, http://bc.pollub.pl/dlibra/docmetadata?id=12764
  • [24] Bastani A., Das S., Kenno S., Rehabilitation of thin walled steel beams using CFRP fabric, Thin-Walled Structures 143/2019, str. 106-215
  • [25] Rzeszut K., Szewczak I., Różyło P., Effective bond length of the CFRP tapes in strengthened sigma steel beams, AIP Conference Proceedings 2060(1)2019, str. 1-10
  • [26] Szewczak I., Rzeszut K., Różyło P., Samborski S., Laboratory and Numerical Analysis of Steel Cold-Formed Sigma Beams Retrofitted by Bonded CFRP Tapes, Materials. 13. 4339. 2020. https://doi.org/10.3390/ma13194339
  • [27] Szewczak I., Rzeszut K., Modern measurement methods in strength tests of sigma thin-walled steel beams, E3S Web of Conferences 49/2018, str. 1-10
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-908b25f3-6e21-4735-b2cc-9ab280ab9f73
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.