Microstructure and Properties of Multifibre Composites

• Autorzy: Głuchowski W. , Rdzawski Z. , Domagała-Dubiel J. , Sobota J.

Identyfikatory

DOI

10.1515/amm-2016-0154

• Języki publikacji: EN

Abstrakty

EN

In the study microstructure and properties of composite multifibre copper-base wires are presented. A decision was made to produce wires with “soft” fibres (Al) and “hard” fibres (Fe). In the study the phenomenon occurring on the border of Al-Cu was also analysed. The produced Cu-Al and Cu-Fe composites presented ordered microstructure with the fibres uniformly distributed in the copper matrix. The composites underwent plastic consolidation to the degree which provided satisfactory mechanical and electrical properties. During the drawing the fibres deformed proportionally with copper matrix therefore their content in the cross section remained unchanged.

Słowa kluczowe

EN

fibrous composite; copper matrix; microstructure; mechanical properties; electrical properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 911--916
• Opis fizyczny: Bibliogr. 10 poz., rys., wykr.

Twórcy

autor

Głuchowski W.

• Institute of Non-Ferrous Metals, 5 Sowińskiego Str., 44-100 Gliwice, Poland

autor

Rdzawski Z.

• Institute of Non-Ferrous Metals, 5 Sowińskiego Str., 44-100 Gliwice, Poland

autor

Domagała-Dubiel J.

• Institute of Non-Ferrous Metals, 5 Sowińskiego Str., 44-100 Gliwice, Poland

autor

Sobota J.

• Institute of Non-Ferrous Metals, 5 Sowińskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] Z. Rdzawski, W. Głuchowski, J. Stobrawa, W. Kempiński, B. Andrzejewski, Microstructure and properties of Cu-Nb and Cu-Ag nanofiber composites, Archives of Civil and Mechanical Engineering 15, 689-697 (2015).
• [2] Z. W. Wu, J. J. Liu, Y. Chen, L. Meng, Microstructure, mechanical properties and electrical conductivity of Cu-12 wt.% Fe microcomposite annealed at different temperatures, Journal of Alloys and Compounds 467, 213-218 (2009).
• [3] Hong, S. I., Hill, M. A., Microstructure and conductivity of Cu-Nb microcomposites fabricated by the bundling and drawing process. Scripta Materialia 44(10), 2509-2515 (2001).
• [4] W. Głuchowski, Z. Rdzawski, J. Stobrawa, Microstructural characterization of high strength high conductivity Cu-Nb microcomposite wires, Journal of Achievements in Materials and Manufacturing Engineering 46/1, 40-49 (2011).
• [5] Y. S., Go, W. A., Spitzig, Strengthening in deformation processed Cu-20% Fe composites. Journal of Materials Science 26(1), 163-171 (1991).
• [6] Xiao-pei LU, Da-wei YAO, Yi CHEN, Li-tian WANG, An-ping DONG, Liang MENG, Jia-bin LIU, Microstructure and hardness of Cu-12% Fe composite at different drawing strains, Applied Physics & Engineering 15/2, 149-156 (2014).
• [7] Z. Rdzawski, W. Głuchowski, J. Stobrawa, J. Sobota, Effect Of Rare-Earth metals addition on microstructure and properties of selected copper alloys, Archives of Metallurgy and Materials 59/2, 641-648 (2014).
• [8] M. Abbasi, A. Karimi Taheri, M.T. Salehi, Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process, Journal of Alloys and Compounds 319, 233-241 (2001).
• [9] Chih-Yuan Chen and Weng-Sing Hwang, Effect of Annealing on the Interfacial Structure of Aluminum-Copper Joints, Materials Transactions 48/7, 1938-1947 (2007).
• [10] E. Hug, N. Bellido, Brittleness study of intermetallic (Cu, Al) layers in copper-clad aluminium thin wires, Materials Science and Engineering A 528, 7103-7106 (2011).

Uwagi

EN

The study was conducted within the scope of Statutory Work of Institute of Non-Ferrous Metals nr 7331/14, Attempts to obtain of multifibres wires by continuous process".

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę