Material vibration propagation in floor pan

• Autorzy: Burdzik R.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The article provides a discussion on the studies on material vibration propagation in floor pan of the passenger car. The purpose was to analyse the vibration signals in multiple measuring points. The time-frequency distribution of the signals allows to identification the dominant component of the signal useful for material natural frequency calculation. Design/methodology/approach: The investigations were conducted based on the modified method of experimental and operating modal analysis. The investigation comprised 3 steps: research and measurements of vibration accelerations in a vertical direction perpendicular to the horizontal surface of vehicle in four selected points (impact excitation), analysis of the time courses of the vibration response, signal processing and analysis of the time-frequency distribution of the vibration Findings: The distribution of the signal allows to identify the dominant frequency band. For the floor pan it is low frequencies, between 20 and 40 Hz. In this band the natural frequencies of the floor pan material can be identification Research limitations/implications: Number of the acceleration sensors and impossibility of the impact excitation signal recorded. Originality/value: Application of the modified method of experimental and operating modal analysis for the vehicle frame and car body. Research on the material properties influence on the vehicle vibration research. Comparison of the vibration structure at floor pan under the place of the driver and passengers feet as the vibration propagation path from frame and car body to the human body.

Słowa kluczowe

EN

automotive materials; floor panel vibration; vibration propagation; passenger car

PL

materiały samochodowe; drgania płyty podłogowej; propagacja drgań; samochód osobowy

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2013
• Tom: Vol. 59, nr 1
• Strony: 22--27
• Opis fizyczny: Bibliogr. 20 poz.

Twórcy

autor

Burdzik R.

• Faculty of Transport, Silesian University of Technology, ul. Krasińskiego 8, 40-019 Katowice, Poland

Bibliografia

• [1] R. Burdzik, Monitoring system of vibration propagation in vehicles and method of analysing vibration modes, Communications in Computer and Information Science 329 (2012) 406-413.
• [2] R. Burdzik, Z. Stanik, J. Warczek, Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Materials and Metallurgy 57/2 (2012) 409-416.
• [3] W.G. Halverson, D.L. Brown, Impulse technique for structural frequency response testing, University of Cincinnati, Reprinted from Sound and Vibration, 1977.
• [4] R. Prasad, D.R. Seshu, A study on dynamic characteristics of structural materials using modal analysis, Asian Journal of Civil Engineering 9/2 (2008) 141-152.
• [5] R. Burdzik, P. Folęga, B. Łazarz, Z. Stanik, J. Warczek, Analysis of the impact of surface layer parameters on wear intensity of frictional couples, Archives of Materials and Metallurgy 57/4 (2012) 987-993.
• [6] R. Burdzik, P. Folęga, B. Łazarz, Z. Stanik, J. Warczek, Attempt to assess operational wear of camshaft cams, Archives of Materials Science and Engineering 57/2 (2012) 57-62.
• [7] P. Folęga, R. Burdzik, Ł. Konieczny, Z. Stanik, J. Warczek, B. Łazarz, Impact of the cam and follower cooperation and of lubrication on the cam wear, Archives of Materials Science and Engineering 58/2 (2012) 158-163.
• [8] T. Węgrzyn, J. Piwnik, R. Burdzik, G. Wojnar, A. Hadryś, New welding technologies for car body frame welding, Archives of Materials Science and Engineering 58/2 (2012) 245-249.
• [9] T. Węgrzyn, R. Wieszała, Significant alloy elements in welded steel structures of car body, Archives of Materials and Metallurgy 57/1 (2012) 45-52.
• [10] L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki, Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides, Journal of Materials Processing Technology 155/156 (2004) 1956-1963.
• [11] Ł. Konieczny, R. Burdzik, B. Łazarz, Analysis of properties of automotive vehicle suspension arm depending on different materials used in the MSC.Adams environment, Archives of Materials Science and Engineering 58/2 (2012) 171-176.
• [12] H.N. Han, J.H. Clark, Lifetime costing of the body in white: steel vs. aluminium, JOM 47/5 (1995) 22-28.
• [13] L. Blacha, G. Siwiec, B. Oleksiak, Loss of aluminium during the process of Ti-AL-V alloy smelting in a vacuum induction melting (vim) furnace, Metalurgija 52 /3 (2013) 301-304.
• [14] J. Łabaj, G. Siwiec, B. Oleksiak, Surface tension of expanded slag from steel manufacturing in electrical furnace, Metalurgija 50/3 (2011) 209-211.
• [15] J. Łabaj, B. Oleksiak, G. Siwiec, Analysis of the options of copper removal from liquid iron by evaporation, Metalurgija 50/3 (2011) 173-175.
• [16] L. Blacha, J. Łabaj, Factors determining the rate of the process of metal bath components evaporation, Metalurgija 51/4 (2012) 529-533.
• [17] J. Barglik, A. Kurek, R. Przyłucki, A. Smalcerz, M.S. Lezok, Change of electromagnetic field distribution around high and medium frequency heaters due to presence of industrial robots, Acta Technica CSAV 57/1 (2012) 61-73.
• [18] L. Blacha, Removal of lead from copper alloyes during vacuum refining, Archives of Metallurgy 48/ 1 (2003) 105-127.
• [19] A. Jambor, M. Beyer, New cars-new materials, Mater Des 18 (1997) 203-209.
• [20] http://boronextrication.com.