Static and Dynamic Properties of Metal-Elastomer Helical Spring With Rectangular Wire Cross-Section

• Autorzy: Michalczyk K. , Salwiński J. , Sikora W.
• Języki publikacji: EN

Abstrakty

EN

The analysis of the influence of the elastomeric element’s geometrical and material parameters on selected static and dynamic properties of metal-elastomer spring with rectangular cross-section is presented in this paper. Numerical FEM simulations presented in the paper revealed that application of even the relatively soft rubber of 50 [Sh°A] hardness as an elastomeric element may contribute to significant increase of spring stiffness. Experimental tests considering static and dynamic properties of the analyzed spring were also performed, utilizing three different types of elastomeric foam. Performed tests demonstrated high efficiency of analyzed construction in terms of vibration damping.

Słowa kluczowe

EN

helical spring; metal-elastomer spring; vibration damping; FEM

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2017
• Tom: Vol. 41, No. 2
• Strony: 49--58
• Opis fizyczny: Bibliogr. 11 poz., fol., il., tab., wykr.

Twórcy

autor

Michalczyk K.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics

autor

Salwiński J.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics

autor

Sikora W.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics

Bibliografia

• 1. Bajkowski, M., Makuch, A., and Lindemann, Z. (2014). Determining parameters of recoil reduction system with spring and magnetorheological damper intended for special object. Machine Dynamics Research, 38(3).
• 2. Greaves, G. N., Greer, A., Lakes, R., and Rouxel, T. (2011). Poisson’s ratio and modern materials. Nature materials, 10(11):823.
• 3. Horst, M. (2006). Piston-cylinder unit with coil spring for motor vehicle strut has elastic outer coating on coil spring. DE102005007741 (A1).
• 4. Kowal, J. (1996). Sterowanie drganiami (in Polish), Gutenberg, Kraków. Technical report, ISBN 83-86310-06-5.
• 5. Michalczyk, J. and Michalczyk, K. (2014). Coil spring clamp with the shock absorber. PL217304 (B1).
• 6. Muzio, C. (2014). Coated coil spring, particularly for automotive suspensions and corresponding method of obtaining. EP1369614 (B1).
• 7. Pękalak, M. and Radkowski, S. (1989). Gumowe elementy sprężyste, (in Polish). PWN Warszawa.
• 8. Rivin, E. I. (2003). Dynamic Properties of Vibration Isolation Systems. Asme press.
• 9. Salwiński, J. and Michalczyk, K. (2015). Tubular spring for axial loads. PL219059 (B1).
• 10. Scarpa, F., Pastorino, P., Garelli, A., Patsias, S., and Ruzzene, M. (2005). Auxetic compliant flexible pu foams: static and dynamic properties. physica status solidi (b), 242(3):681–694.
• 11. Snowdon, J. C. (1979). Vibration isolation: use and characterization. The Journal of the Acoustical Society of America, 66(5):1245–1274.