Towards the development of feature - based ontology for Inspection Planing System on CMM

• Autorzy: Stojadinovic S. M. , Majstorovic V. D.
• Języki publikacji: EN

Abstrakty

EN

The paper define the basic geometrical primitives as classes of Engineering Ontology in order to develop feature - based ontology for Inspection Planning System for CMM. The process of acquisition the properties of individuals and properties of classes is proposed, as one of the main components of Engineering Ontology suitable for implementation in the software for development the ontology - Protégé. The proposed method describes derived geometrical characteristics or characteristics that are measured on the mechanical part. The results indicate that further development of methodology for Engineering Ontology is justified in the field of production metrology and implementation in the appropriate software.

Słowa kluczowe

EN

engineering ontology; basic geometrical primitives; CMM; protégé

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2012
• Tom: Vol. 12, No. 1
• Strony: 89--98
• Opis fizyczny: Bibliogr. 13 poz., tab., rys.

Twórcy

autor

Stojadinovic S. M.

• University of Belgrade, Faculty of Mechanical Engineering, Serbia

autor

Majstorovic V. D.

• University of Belgrade, Faculty of Mechanical Engineering, Serbia

Bibliografia

• [1] CHO, -W. M., LEE H., YOUN G.-S., CHOI J., 2005, A feature-based inspection planning system for coordinate measuring machines, International Journal of Advance Manufacturing Technology, 26-1078–1087, DOI 10.1007/s00170-004-2077-8.
• [2] MAJSTOROVIĆ V., HODOLIČ J. 1998, Numerički upravljane merne mašine, Fakultet tehničkih nauka, Institut za proizvodno mašinstvo – Novi Sad, ISBN 86-499-0091-7.
• [3] BARREIRO J., LABARGA J. E., VIZAN A., RIOS J., 2003, Information model for the integration of inspection activity in a concurrent engineering framework, International Journal of Machine Tools & Manufacture, 4- 797-809. doi: 10.1016/S0890-6955(03)00060-9.
• [4] MARTINEZ-PALLITERO S., BARREIRO J., CUESTA E., ALVAREZ B. J., 2011, A new process-based for KBE system implementation: application to inspection process planning, International Journal of Advance Manufacturing Technology, DOI 10.1007/s00170-011-3285-7.
• [5] DARTIGUES C., GHODOUS P., GRUNINGER M., PALLEZ D., SRIRAM R., 2007, CAD/CAP Integration using Feature Ontology, CONCURRENT ENGINEERING: Research and Applications, 15-2, DOI 10.1177/1063293X0707931.
• [6] NOY N. F., MCGUINNESS D. L., 2001, Ontology Development 101: A Guide to Creating Your First Ontology,Tech. Rep. KSL-01-05 and SMI-2001-0800. Stanford, CA: Stanford University, Knowledge Systems Laboratory and Stanford Medical Informatics.
• [7] STOJADINOVIC S., MAJSTOROVIC V., 2011, Engineering ontology – state of the art and future development, 6th International Working Conference “TOTAL QUALITY MANAGEMENT – ADVANCE AND INTELLIGENT APPROACHES, 7th-11th, June, Belgrade, Serbia, 54-58, ISBN 978-86-7083-727-0.
• [8] ZHAO F., HABEEB S., XU X ., 2009, Research into integrated design and manufacturing based on STEP,International Journal of Advance Manufacturing Technology, 44-606–624, DOI 10.1007/s00170-008-1841-6.
• [9] SOURLIER, D., 1995, Three Dimenzional Feature Independent Bestfit in Coordinate Metrology, Doctoral dissertation, Swiss Federal Institute of Tehnology Zurich.
• [10]USCHOLD M., GRUNINGER M., 1996, Ontologies: Principles, Methods and Applications, Knowledge Engineering Review, 11(2).
• [11]STOJADINOVIC S., MAJSTOROVIC V., 2011, Metrological primitives in production metrology – ontological approach, 34th INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING, 29.-30. September, Nis, Serbia, 167-170, ISBN 978-86-6055-019-6.
• [12]http://protege.stanford.edu/
• [13]MATTHEW H. et al., 2009, A Practical Guide to Building OWL Ontologies Using Protégé 4 and CO-DE Tools,Edition 1.2, The University Of Manchester.