FEM simulation of the tube rolling process in Diescher’s mill

• Autorzy: Pater Z. , Tofil A.
• Języki publikacji: EN

Abstrakty

EN

This paper deals with the issue of numerical modelling of the piercing process of a thick–walled bush in a two-rolled skew rolling mill, equipped with guiding devices of Diescher’s type. After a short characteristic of the subject matter, the developed geometric model of the process was discussed, with taking kinematics of tools movement and thermal phenomena present in metal during forming into consideration. Next, the results of calculations were presented in a form of fields of strain, damage criterion and temperature. Distributions of force parameters acting on particular tools during the process of bush rolling were also given.

Słowa kluczowe

EN

tube rolling; FEM; state of stress and strain

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2014
• Tom: Vol. 8, nr 22
• Strony: 51--55
• Opis fizyczny: Bibliogr. 14 poz., fig.

Twórcy

autor

Pater Z.

• Mechanical Engineering Faculty, Lublin University of Technology, 36 Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Tofil A.

• Mechanical Engineering Faculty, Lublin University of Technology, 36 Nadbystrzycka Str., 20-618 Lublin, Poland

Bibliografia

• 1. Kazanecki J. Production of seamless pipes. Ed. AGH, Krakow 2003 (in Polish).
• 2. Pietsch J., Thievien P. MPT International, Vol. 2, 2003, 52-60.
• 3. Ceretti E., Giardini C., Attanasio A., Brisotto F., Capoferri G.: Tube & Pipe Technology, 2004, March/April, 155-159.
• 4. Komori K.: International Journal of Mechanical Sciences, Vol. 47, 2005, 1838-1853.
• 5. Pater Z., Kazanecki J., Bartnicki J.: Journal of Materials Processing Technology, Vol. 177, 2006, 167-170.
• 6. Pater Z., Kazanecki J.: Metallurgy and Foundry Engineering, 32(1), 2006, 31-40.
• 7. Kazanecki J., Pater Z., Bartnicki J.: Computer Methods in Materials Science, 7(2), 2007, 299-304.
• 8. Lu L., Wang Z., Wang F., Zhu G., Zhang X.: J. Shanghai Jiaotong Univ. (Sci), 16(3), 2011, 281-185.
• 9. Prince J.C., Marono R., Leon F.: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 217, 2003, 337-340.
• 10. Pater Z. Cross-wedge rolling. Ed. Lublin University of Technology, Lublin 2009 (in Polish).
• 11. Fu X.P., Dean T.A.: International Journal of Machine Tools and Manufacture, 33(3), 1993, 367-400.
• 12. Pater Z.: Archives of Metallurgy, 48(1), 2003, 21-35.
• 13. Pater Z., Tofil A.: Archives of Metallurgy and Materials, 52(2), 2007, 289-297.
• 14. Gouveia B.P.P.A, Rodrigues J.M.C, Martins P.A.F: Journal of Materials Processing Technology, Vol. 101, 2000, 52-63.