Design of a GSM 900 Energy Harvesting Model for a Remote-Control Device

• Autorzy: Nayak Deepak Kumar , Muduli Arjuna

Identyfikatory

DOI

10.24425/ijet.2022.143884

• Języki publikacji: EN

Abstrakty

EN

This paper deals with designing and simulation of an efficient RF-DC energy harvesting system for a remote control device. GSM down-link frequency of 935MHz to 960MHz and uplink frequency of 890MHz to 915MHz is taken as the RF source with centre frequency as 950MHz and 900MHz respectively. The simulation model has been created by using Advanced Design System (ADS) software. Performance of the circuit has been tested with matching and without matching circuits. The output voltage obtained was 0.372V DC and maximum efficiency up to 35.73% was achieved for the downlink GSM frequency by the lumped method for -10dB input source power. By considering more number of rectifier stages, output DC voltage can be increased and it can be utilized for replacing DC battery of the remote control device.

Słowa kluczowe

EN

GSM 900; Lumped matching; Villard multiplier; RF/DC

• Wydawca: Polish Academy of Sciences, Committee of Electronics and Telecommunication
• Czasopismo: International Journal of Electronics and Telecommunications
• Rocznik: 2022
• Tom: Vol. 68. No. 4
• Strony: 767--773
• Opis fizyczny: Bibliogr. 15 poz., fot., rys., wykr.

Twórcy

autor

Nayak Deepak Kumar

• ECE, Budge Budge Institute of Technology, Kolkata, West Bengal, India

autor

Muduli Arjuna

• ECE, Koneru Lakshmaiah Education Foundation, Vaddeswaram, Andhra Pradesh, India

Bibliografia

• [1] H. Jabbar, Y. Song, T. Jeong, “RF energy harvesting system and circuits for charging of mobile devices,” IEEE Trans. Consumer Electronics, vol. 56, no. 1, pp. 247-253, 2010. Available: https://ieeexplore.ieee.org/document/5439152.
• [2] Y.Huang , A. Athalye, S. Das, P. Djuric and M. Stanacevic, “RF Energy Harvesting and Management for Near-Zero Power Passive Devices,” in Proceedings of the 2021 IEEE International Symposium on Circuits and Systems (ISCAS), 2021, pp. 1-5. Available: https://ieeexplore.ieee.org/document/9401193.
• [3] J.A. Leon-Gil, J.C. Perales-Cruz, L. Licea-Jimenez, S.A. Pérez Garcia and A. Alvarez Quintana, “RF energy scavenging system for DC power from FM broadcasting based on an optimized Cockroft Walton voltage multiplier,” Journal of Electromagnetics Waves and Applications, vol. 29, no. 11, pp. 1440-1453, 2015. Available: https://doi.org/10.1080/09205071.2015.1047901.
• [4] B. V. S. Suwan, W. W. G. Vidula, W. K. I. L. Wanniarachchi, C. H. Manathunga and S. Jayawardhana, “The Design and Implementation of an RF Energy Harvesting System Using Dynamic Pi-Matching, Enabling Low-Power Device Activation and Energy Storage,” Progress In Electromagnetics Research, vol. 119, pp. 49-63, 2022. Available: http://www.jpier.org/PIERC/pier.php?paper=21121802.
• [5] G.P. Tan and J.J.P. Bautista, “Utilization of Low Cost RF Harvester Circuit in Harnessing electrical energy from multiband RF signals,” in Proceedings of the 2017 Asian Conference on Energy, Power and Transportation Electrification (ACEPT), 2017, pp. 1-5. Available: https://ieeexplore.ieee.org/document/8168604.
• [6] J. Mucko, “The Cockcroft-Walton voltage multiplier fed by an inverter in which the series resonant phenomena were used,” in Proceedings of the 2018 Innovative Materials and Technologies in Electrical Engineering (i-MITEL), (2018), pp. 1-6. Available: https://ieeexplore.ieee.org/document/8370479.
• [7] P. Nintanavongsa, U. Muncuk, D.R. Lewis and K. R. Chowdhury, “Design Optimization and Implementation for RF Energy Harvesting,” IEEE Journal on Emerging and Selected Topics in Circuits and Systems, vol. 2, no. 1, pp. 24–33, 2012. Available: https://ieeexplore.ieee.org/document/6159063.
• [8] N. Akter, B. Hossain, H. Kabir, A.H. Bhuiyan, M. Yeasmin and S. Sultana, “Design and Performance Analysis of 10-Stage Voltage Doublers RF Energy Harvesting Circuit for Wireless Sensor Network,” Journal of Communications Engineering and Networks, vol. 2, no. 2, pp. 84-91, 2014. Available: DOI: 10.18005/JCEN0202004.
• [9] S. D. Assimonis, S. Daskalakis, A. Bletsas, “Sensitive and Efficient RF Harvesting Supply for Batteryless Backscatter Sensor Networks,” IEEE Trans. Microw. Theory Tech., vol. 64, no. 4, pp. 1327-1338. 2016. Available: https://ieeexplore.ieee.org/document/7433469?reload=true.
• [10] M. Zeng, A.S. Andrenko, X. Liu, Z. Li, and H. Tan, “A compact fractal loop rectenna for RF energy harvesting,” IEEE Antennas Wireless Propag. Lett., vol. 16, pp. 2424-2427, 2017. Available: https://ieeexplore.ieee.org/document/7967705.
• [11] S. Chandravanshi and, M. J. Akhtar, "Design of Efficient Rectifier Circuit in the GSM Band for Energy Harvesting Applications,” in Proceedings of the 2017 IEEE MTT-S International Microwave and RF Conference (IMaRC), 2017, pp. 227-230. Available: https://ieeexplore.ieee.org/document/8449722.
• [12] I. Chaour, A. Fakhfakh and O. Kanoun, “Enhanced passive RF-DC converter circuit efficiency for low RF energy harvesting,” Sensors, vol. 17, no. 3, pp. 1–14, 2017. Available: https://www.mdpi.com/1424-8220/17/3/546.
• [13] Y. Uzun, “Design and implementation of RF energy harvesting system for Low-Power Electronic Devices,” Journal of Electronic Materials, vol. 45, pp. 3842-3847, 2016. Available: https://link.springer.com/article/10.1007/s11664-016-4441-5.
• [14] T. Le, K. Mayaram, and T. Fiez, “Efficient far-field radio frequency energy harvesting for passively powered sensor networks,” IEEE Journal of Solid-State Circuits, vol. 43, no. 5, pp. 1287-1302, 2008. Available: https://ieeexplore.ieee.org/document/4494663.
• [15] G. Papotto, F. Carrara and G. Palmisano, A 90-nm CMOS threshold-compensated RF energy harvester, IEEE Journal of Solid-State Circuits vol. 46, no. 9, pp. 1985-1997, 2011. Available: https://ieeexplore.ieee.org/document/5910132.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).