Bending strength of beech laminated wood after load by cyclic bending

• Autorzy: Gáborík J. , Langová N.
• Języki publikacji: EN

Abstrakty

EN

For unique properties is laminated wood particularly suitable for the production of seating and bedding. The main aim of this research is focused on the investigation of the bending properties of laminated beech wood after load by cyclic bending. During the cyclic load were observed properties, strength and elasticity, which changed unevenly. The changes in most cases were not statistically significant.

Słowa kluczowe

EN

laminated wood; beechload by cyclic bending; bending strength; flexural modulus

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2018
• Tom: No. 104
• Strony: 571--78
• Opis fizyczny: Bibliogr. 31 poz.

Twórcy

autor

Gáborík J.

• Department of Furniture and Wood Products, Faculty of Wood Sciences and Technology, Technical University in Zvolen, Slovakia

autor

Langová N.

• Department of Furniture and Wood Products, Faculty of Wood Sciences and Technology, Technical University in Zvolen, Slovakia

Bibliografia

• 1. AYDIN İ., ÇOLAK S., ÇOLAKOĞLU G., SALIH E., 2004: A comparative study on some physical and mechanical properties of Laminated Veneer Lumber (LVL) produced from Beech (Fagus orientalis Lipsky) and Eucalyptus (Eucalyptus camaldulensis Dehn.) veneers. Holz als Roh- und Werkstoff. 62 (3), p. 218-220, DOI: 10.1007/s00107-004-0464-3.
• 2. BEKHTA P., NIEMZ P., SEDLIAČIK J., 2012: Effect of pre-pressing of veneer on the glueability and properties of veneer-based products. In European journal of wood and wood products. 2012, Vol. 70, No. 1-3, p. 99-106.
• 3. BEKHTA P., PROSZYK S., KRYSTOFIAK T., SEDLIAČIK J., NOVÁK I., MAMOŇOVÁ M., 2017: Effect of short-term thermomechanical densification on the structure and properties of wood veneers. In Wood material science & engineering. 2017, No. 1, p. 40-54, ISSN 1748-0272.
• 4. DUDAS J., VILHANOVÁ A., 2013: Sozdanije oblegčennoj fanery dľa konkretnych celej. In Annals of Warsaw University of Life Sciences. 2013, No. 82, p. 235-241, ISSN 1898-5912.
• 5. ECKELMAN C. A., 1993: Potential uses of laminated veneer lumber in urnitured. Forest Products Journal. 43 (4): p. 19-24.
• 6. EN 1725 2001: Domestic furniture. Beds and mattresses. Safety requirements and test methods. Brussels, Belgium: European Commttee for Standardization: 2001.
• 7. EN 310 1993: Wood-based panels – Determination of modulus of elasticity in bending and of bending strength. Brussels, Belgium: European Commttee for Standardization: 1993.
• 8. FEKIAČ J., 2016: Priestorové prvky v konštrukciách čalúneného nábytku - tvárnené dyhy. In Čalúnnické dni 2016: medzinárodný vedecko-odborný seminár. Zvolen: 2016, p. 44-49, ISBN 978-80-228-2906-9.
• 9. FEKIAČ J., GÁBORÍK J., 2016: Formability of radial and tangential beech veneers. In Annals of Warsaw University of Life Sciences. 2016, No. 94, p. 191-197, ISSN 1898-5912.
• 10. FEKIAČ J., GÁBORÍK J., ŠMIDRIAKOVÁ M., 2016: 3D formability of moistened and steamed veneers. In Acta Facultatis Xylologiae Zvolen, 2016, No. 2, p. 15-26. ISSN 1336-3824.
• 11. FEKIAČ J., ZEMIAR J., GAFF M., GÁBORÍK J., GAŠPARÍK M., MARUŠÁK R., 2015. 3D-moldability of veneers plasticized with water and ammonia. In BioResources. 2015. Vol. 10, No. 1, p. 866-876.
• 12. FORESTPORTAL.sk, 2014. Súhrnné informácie o stave lesov 2012, Zastúpenie drevín v lesoch SR, on line to: www.forestportal.sk.
• 13. GÁBORÍK J., 2012: Vybrané vlastnosti lamelového dreva na báze zhustených vrstiev. (Selected properties of laminated wood made of densified layers) In Chip and chipless woodworking processes 2012: the 8th international science conference, September 6-8, 2012, Technical University in Zvolen. Zvolen: Technická Univerzita vo Zvolene. 2012, p. 87-92, ISBN 978-80-228-2385-2
• 14. GÁBORÍK, J. 2013 Vplyv lepidla na vybrané vlastnosti lamelového dreva (Effect of adhesive on selected properties of laminated wood). In.: Pokroky vo výrobe a použití lepidiel v drevopriemysle = Adhesives in woodworking industry: XXI. sympózium, Zvolen, June 26-28, 2013: zborník referátov Zvolen: Technická univerzita vo Zvolene, 2013, p. 52-58, ISBN 978-80-228-2529-0.
• 15. GÁBORÍK J., DUDAS J., 2008: Thermo-mechanical Smoothing of Wood. In.: Annals of Warsaw University of Life Sciences –SGGW, Forestry and Wood Technology No. 65, Warszawa, 2008, p. 49 – 54, ISSN 1898-5912.
• 16. GÁBORÍK J., DUDAS J., KULÍK J., RAUČINA M., 2011: Properties of densified laminated aspen wood at bend loading. In.: Annals of Warsaw University of Life Sciences. Forestry and Wood Technology. - Warszawa: Warszaw University of Life Sciences Press, 2011, No. 74, p. 69-73, ISSN 1898-5912.
• 17. GÁBORÍK J., GAFF M., RUMAN D., ZÁBORSKÝ V., KAŠÍČKOVÁ V., SIKORA A., 2016. Adhesive as a Factor Affecting the Properties of Laminated Wood. In.: BioResources. Vol.11, No.4, p. 10565-10574, ISSN 1930-2126, DOI: 10.15376/biores.11.4.10565-10574.
• 18. GÁBORÍK J., VILHANOVÁ A., 2016: Selected mechanical properties of lightened plywood. In Annals of Warsaw University of Life Sciences. 2016, p. 205-211, ISSN 1898-5912.
• 19. GAFF M., GÁBORÍK J., 2014: Effect of cyclic loading on the elasticity of beech solid and laminated wood / BioResources - Vol. 9, No. 3, p. 4288-4296, ISSN 1930-2126.
• 20. IGAZ R., MACEK Š., ZEMIAR J., 2014: Vplyv jednosmerného cyklického zaťažovania ohybom na počiatočnú rýchlosť relaxácie bukových lamiel. In Acta Facultatis Xylologiae. Technical University in Zvolen, Faculty of Wood Science and Technology, 2014, 56 (2): p. 27-35, ISSN 1336-3824.
• 21. LANGOVÁ N., JOŠČÁK P., 2014: Effect of mechanical modification of wood veneers on their planar formability. In Annals of Warsaw University of Life Sciences. 2014, No. 87, p. 142-147, ISSN 1898-5912.
• 22. LANGOVÁ N., JOŠČÁK P., MOŽUCHOVÁ M., TRENČANOVÁ Ľ., 2013: Analysis the effects bending load of veneers for purposes of planar moulding. In Annals of Warsaw University of Life Sciences. 2013, No. 83, p. 173-178, ISSN 1898-5912.
• 23. SLABEJOVÁ, G., ŠMIDRIAKOVÁ, M. 2014. Influence of modification of veneers on 3D - forming. In Annals of Warsaw University of Life Sciences. Forestry and Wood Technology. Warszawa: Warszaw University of Life Sciences Press, 2014, No. 85, p. 226-229, ISSN 1898-5912.
• 24. SLABEJOVÁ G., LANGOVÁ N., DEÁKOVÁ V., 2017: Influence of silicone resin modification on veneer tensile strength and deformation. Acta Facultatis Xylologiae Zvolen, 2017, 59 (1), p. 41-47, ISSN 1336-3824.
• 25. ŠMIDRIAKOVÁ M., SEDLIAČIK J., VÉGH B., BEKHTA P., 2015: Aplikácia napenenej PVAC disperzie pri výrobe preglejovaných dosiek. In Acta Facultatis Xylologiae. Technical University in Zvolen, Faculty of Wood Science and Technology 2015. Roč. 57, No. 2, p. 109-115, ISSN 1336-3824.
• 26. SVOBODA T., RUMAN D., GAFF M., GAŠPARÍK M., MIFTIEVA E., DUNDEK Ľ., 2015: Bending characteristics of multilayered soft and hardwood materials. Bioresouces 10(4), p. 8461-8473, DOI: 10.15376/biores.10.4.8461-8473.
• 27. ZEMIAR J., KOTRADY M., 1999: Zhodnocovanie dreva technológiou tvarového lamelovania. 50 rokov vysokoškolského drevárskeho štúdia, TU vo Zvolene, 1999, p. 75-81.
• 28. ZEMIAR J., GÁBORÍK J., SOLÁR M., KOTRADY M., 2000: Tvárnenie dreva ohýbaním. 1. Vydanie. Zvolen : TU vo Zvolene. 2000, 69 p. ISBN 80-228-0930-6.
• 29. ZEMIAR J., GÁBORÍK J., MUZIKÁŘ Z., NAVRÁTIL V., RUŽINSKÁ E., ŠEBO N., 2009: Technológia výroby nábytku. 1. Vydanie. Zvolen: TU vo Zvolene. 2009, 287 p. ISBN 978-80-228-2064-6.
• 30. ZEMIAR J., FEKIAČ J., 2014: Skúšanie a hodnotenie 3D - tvárnosti dýh. In Acta Facultatis Xylologiae Zvolen: Technical University in Zvolen, Faculty of Wood Science and Technology, 2014, No. 1, p. 31-38, ISSN 1336-3824.
• 31. ZEMIAR J., FEKIAČ J., GÁBORÍK J., 2014: Strengthening of veneers for 3Dforming. In Annals of Warsaw University of Life Sciences. 2014, p. 297-303, ISSN 1898-5912.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).