Verification of the Computed Tomography Results of Aluminum Alloy Welded Joint

• Autorzy: Malicki M. , Sobczak K.

Identyfikatory

DOI

10.2478/fas-2018-0004

• Języki publikacji: EN

Abstrakty

EN

Computed tomography (CT) of aluminum welded joint specimen has been performed. On the tomographic cross sections some defects have been found. To verify them the metallography cross sections of welded has been done. It was found that selected defects are micro cracks.

Słowa kluczowe

EN

computed tomography; CT; welded joints; defects; microcracks

• Wydawca: Wydawnictwa Naukowe Sieci Badawczej Łukasiewicz - Instytutu Lotnictwa
• Czasopismo: Fatigue of Aircraft Structures
• Rocznik: 2018
• Tom: Iss. 10
• Strony: 47--52
• Opis fizyczny: Bibliogr. 5 poz., rys., wykr.

Twórcy

autor

Malicki M.

• Institute of Aviation, Warsaw, Poland

autor

Sobczak K.

• Institute of Aviation, Warsaw, Poland

Bibliografia

• [1] R. F. Hamade, A.M.R. Baydoun, Nondestructive detection of defects in friction stir welded lap joints using computed tomography, Materials and Design 162 (2019) 10-23.
• [2] ECSS Standard - ECSS-Q-ST-70-39C „Welding of metallic materials for light hardware”, ECSS Executive Secretariat, ECSS Technical Authority, 1 Maj 2015
• [3] Tomographic and metallographic tests protocol, CBMK/LM2/21935/06/1/2017, Institute of Aviation, CBMM Archives.
• [4] N. Coniglio, C. E. Cross, I. Dörfel, W. Österle, Phase formation in 6060/4043 aluminum weld solidification, Materials Science and Engineering A 517 (2009) 321-327.
• [5] W. Boonchouytan, J. Chatthong, S. Rawangwong, R. Burapa, Effect of Heat Treatment T6 on the Friction Stir Welded SSM 6061 Aluminum Alloys, Energy Procedia 56 (2014) 172-180.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).