Analysis of friction interaction and optimisation of detail surface hardening technologies using non-local mathematical models

• Autorzy: Lyashenko B. A. , Stotsko Z. A. , Kuzin O. A. , Kuzin M. O. , Mechnik V. A.

Identyfikatory

DOI

10.5604/01.3001.0014.1960

• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of the work is to build physically sound engineering and design schemes that take into account the behaviour of polycrystalline metal systems under intense loads and allow optimization of surface treatment technologies to increase the operational reliability parameters of products. Design/methodology/approach: Using the approaches of thermodynamics, a methodological scheme is proposed, on the basis of which it is possible to optimize surface engineering technologies to increase the contact durability of details. Findings: It was found that the maximum increase in the durability of steel 40X13 (AISI 420) is achieved with thermocyclic ion nitriding in a cycle of ± 50°C, and the minimum with isothermal nitriding. Research limitations/implications: In this paper, the optimization of technological solutions to increase the contact durability of structural elements operating under prevailing power loads is given. Practical implications: Using the proposed mathematical relationships, optimal technological regimes of ion-plasma nitriding were established for various operating conditions, under which the maximum durability and wear resistance of 40X13 (AISI 420) steel are ensured. Originality/value: The paper proposes an approach to the formation of functionally gradient surface layers of steel with specified operational parameters when choosing optimal nitriding technology modes based on nonlocal mathematical models.

Słowa kluczowe

EN

friction; surface engineering; non-local mathematical model; optimisation

PL

tarcie; inżynieria powierzchni; model matematyczny; optymalizacja

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2020
• Tom: Vol. 100, nr 1
• Strony: 20--25
• Opis fizyczny: Bibliogr. 12 poz., rys., wykr.

Twórcy

autor

Lyashenko B. A.

• G.S. Pisarenko Institute for Problems of Strength of the National Academy of Sciences of Ukraine, 2 Timiryazevs’ka str., Kyiv, 01014, Ukraine

autor

Stotsko Z. A.

• Lviv Polytechnic National University, 12 Bandera street, Lviv, 79013, Ukraine

autor

Kuzin O. A.

• Lviv Branch of Dnipro National University of Railway Transport named after academician V. Lazaryan, 12a I. Blazhkevich street, Lviv, 79052, Ukraine

autor

Kuzin M. O.

• Lviv Branch of Dnipro National University of Railway Transport named after academician V. Lazaryan, 12a I. Blazhkevich street, Lviv, 79052, Ukraine
• Lviv Research Institute for Forensic Expertise, 54 Lipinskogo street, Lviv, 79024, Ukraine

autor

Mechnik V. A.

• V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, 2, Avtozavodskaya Str., Kiev, 04074

Bibliografia

• [1] L.A. Dobrzanski, Engineering Materials and Materials Design, Fundamentals of Materials Science and Physical Metallurgy, WNT, Warsaw, 2006 (in Polish).
• [2] M.V. Chernets, Prediction of the life of a sliding bearing based on a cumulative wear model taking into account the lobing of the shaft contour, Journal of Friction and Wear 36/2 (2015) 163-169. DOI: https://doi.org/10.3103/S1068366615020038
• [3] Optimisation of coating technology according to the criteria of strength and wear resistance, Kiev, 2010 (in Russian).
• [4] V.E. Egorushkin, V.E. Panin, Translation-Rotation Plastic Flow in Polycrystals under Creep, Physical Mesomechanics 21/5 (2018) 401-410. DOI: https://doi.org/10.1134/S1029959918050041
• [5] R. Gohar, H. Rahnejat, Fundamentals of Tribology, Imperial College Press, 2008.
• [6] Physical-Mathematical Modeling Complex Systems, Spolom, 2006 (in Ukrainian).
• [7] ASM Handbook, Volume 18 Friction, Lubrication and Wear Technology, ASM International, 1992.
• [8] N.O. Kuzin, A Mathematical Model Describing the Variation in Material Properties, International Applied Mechanics 51/4 (2015) 474-479. DOI: https://doi.org/10.1007/s10778-015-0708-4
• [9] Z. Stotsko, M. Kuzin, Life cycle assessment of technical systems taking into consideration degradation processes in materials of constructions, Archives of Materials Science and Engineering 89/1 (2018) 5-8. DOI: https://doi.org/10.5604/01.3001.0011.5724
• [10] G.A. Korn, T.M. Korn, Mathematical Handbook for Scientists and Engineers: Definitions, Theorems, and Formulas for Reference and Review, General Publishing Company, 2000.
• [11] Maple Programming Guide, Waterloo Maple, 2012.
• [12] B.A. Lyashenko, N.V. Novikov, S.A. Klimenko, Discrete modification of the surface layer of machine parts and tools, Kiev, 2017 (in Russian).

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).