PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Severe Plastic Deformation Induced in Al, Al-Si, Ag and Cu by Hydrostatic Extrusion

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Zastosowanie metody wyciskania hydrostatycznego do generowania dużych odkształceń plastycznych w Al, Al-Si, Ag oraz Cu
Języki publikacji
EN
Abstrakty
EN
The study was concerned with the effect of severe deformation induced in one pass, by hydrostatic extrusion on the properties of fine aluminum, aluminum-silicon alloy, copper and silver wires. The influence of adiabatic heating which takes place during deformation on the mechanical properties and microstructure of the wires was examined. The quality of the surface of the wires was estimated. It has been demonstrated that fine aluminum and silver wires processed by hydrostatic extrusion have very good mechanical properties and a high-quality surface.
PL
W pracy zbadano wpływ dużych odkształceń, uzyskanych w jednym procesie wyciskania hydrostatycznego na właściwości wytworzonych produktów w postaci cienkich drutów z aluminium, stopu aluminium-krzem, miedzi oraz srebra. Uwzględniono efekty grzania adiabatycznego w trakcie procesu odkształcenia i jego wpływ na własności mechaniczne oraz mikrostrukturę produktów. Ocenie została poddana także jakość powierzchni wytwarzanych drutów. Dla aluminium oraz srebra wykazano, że za pomocą procesu wyciskania hydrostatycznego można wytwarzać druty o wysokich własnościach mechanicznych oraz dobrej jakości powierzchni.
Twórcy
autor
  • Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), Sokolowska 29 Str., 01-142 Warszawa, Poland
autor
  • Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), Sokolowska 29 Str., 01-142 Warszawa, Poland
autor
  • Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), Sokolowska 29 Str., 01-142 Warszawa, Poland
autor
  • Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), Sokolowska 29 Str., 01-142 Warszawa, Poland
Bibliografia
  • [1] R. Valiev, Nanostructuring of metals by severe plastic deformation for advanced properties, Nature 3, 511-516 (2004).
  • [2] V. M. Segal, Materials processing by simple shear, Mater. Sci. Eng. A 197, 157-164 (1995).
  • [3] E. Schafler, R. Pippan, Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel, Mater. Sci. Eng. A 387-389, 799-804 (2004).
  • [4] M. Kulczyk, J. Skiba, S. Przybysz, W. Pachla, High strength silicon bronze (C65500) obtained by hydrostatic extrusion, Archives of Metallurgy and Materials, 57, 3, 859-862 (2012).
  • [5] W. Pachla, M. Kuczyk, M. Sus-Ryszkowska, A. Mazur, K. J. Kurzydłowski, Nanocrystalline titanium produced by hydrostatic extrusion, Journal of Materials Processing Technology 205, 173-182 (2008).
  • [6] M. Kulczyk, W. Pachla, A. Mazur, M. Suś-Ryszkowska, N. Krasilnikov, K. J. Kurzydłowski, Producing bulk nanocrystalline materials by combined hydrostatic extrusion and equal channel angular pressing, Materials Science Poland 25, 4, 991-999 (2007).
  • [7] W. Pachla, M. Kulczyk, A. Swiderska-Sroda, M. Lewandowska, H. Garbacz, A. Mazur, K. J. Kurzydłowski, Nanostructuring of metals by hydrostatic extrusion, Proc. of 9th Int. Conf, on Metal Forming ESAFORM 2006, Eds. N. Juster, A. Rosochowski, Publ. House Akapit, 535-538 (2006).
  • [8] W. Pachla, A. Mazur, J. Skiba, M. Kulczyk, S. Przybysz, Wrought magnesium alloys ZM21, ZW3, and WE43 processed by hydrostatic extrusion with back pressure, Archives of Metallurgy and Materials 57, 2, 485-493 (2012).
  • [9] http://www.anishindustrial.com
  • [10] Hyung-Giun Kim, Dae-Hyung Cho, Eun-Kyun Jeong, Won-Yong Kim, Sung-Hwan Lim, Microstructure Evolution of Al-1% Si Bonding Wire for Microelectronic Reliability, Electronic Materials Letters 5, 3, 99-103 (2009).
  • [11] http://www.soundlabsgroup.com.au
  • [12] http://www.materion.com
  • [13] N. Inoue, M. Nishihara, Hydrostatic Extrusion, Theory and application, Elsevier, London 1985.
  • [14] H. Li Pugh Ed., Mechanical behaviour of materials under pressure, Elsevier Publ. Co. Ltd., Amsterdam 1970.
  • [15] I. Alexander, S. S. Pavlov, M. Kiritani, Effective temperature rise during propagation of shock wave and high-speed deformation in metals, Mater.Sci.Eng. A 350, 245-250 (2003).
  • [16] A. el-Domiaty, S. Z. Kassab, Temperature rise in wire-drawing, Journal of Materials Processing Technology 83, 72-83 (1998).
  • [17] W. Pachla, L. Styczynski, S. Porowski, S. Wojciechowski, Recovery and recrystallization of polycrystalline copper during hydrostatic extrusion, Metal Science 16, 519-524 (1982).
  • [18] T. S. Wiśniewski, W. Pachla, D. Kukla, A. Mazur, K. J. Kurzydłowski, Application of Infrared Thermography in Investigation of Hydrostatic Extrusion, QIRT’2004 7th Int. Conference on Quantitative Infrared Thermography, von Karman Institute, Rhode-St-Genèse, Belgium, July 5-8, (2004).
  • [19] http://www.goodfellow.com
  • [20] E. Bernabeu et al., Classyfication of surface structures on fine metallic wires, Applied Surface Science 180, 191-199 (2001).
  • [21] J. Luksza, J. Majta, M. Burdek, M. Rumiński, Modelling and measurements of mechanical behavior in multi-pass drawing process, Journal of Materials Processing Technology 80-81, 398-405 (1998).
Uwagi
This work was conducted within the grant No. R15 033 02 awarded by the Polish Ministry of Science and Higher Education.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-8e1e54fc-c115-41de-b160-ab790cc60271
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.