Production and Microstructural Characterization of Nb-Si based in-situ Composite

• Autorzy: Garip Y.

Identyfikatory

DOI

10.24425/amm.2020.132839

• Języki publikacji: EN

Abstrakty

EN

The Nb-Si based in-situ composite was produced by resistive sintering (RS) technique. In order to identify present phases, X-ray diffraction (XRD) analysis was used on the composite. XRD analysis revealed that the composite was composed of Nb solid solution (Nbss) and α-Nb₅Si₃ phases. The microstructure of the composite was characterized by using a scanning electron microscope (SEM). The energy-dispersive spectroscopy (EDS) was performed for the micro-analysis of the chemical species. SEM-EDS analyses show that the microstructure of composite consists of Nbss, Nb₅Si₃ and small volume fraction of Ti-rich Nbss phases. The micro hardness of constituent phases of the composite was found to be as 593±19 and 1408±33 Hv_0.1, respectively and its relative density was % 98.54.

Słowa kluczowe

EN

Nb-Si in-situ composite; powder metallurgy; RS; solid solution strengthening

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 2
• Strony: 917--921
• Opis fizyczny: Bibliogr. 36 poz., fot., rys., tab., wzory

Twórcy

autor

Garip Y.

• Sakarya Applied Science University, Technology Faculty, Department of Metallurgy and Materials Engineering, Esentepe Campus, 54187, Sakarya-Turke

Bibliografia

• [1] B. Kong, L. Jia, L. Su, K. Guan, J. Weng, H. Zhang, Mater. Sci. Eng. A, 639, 114-121 (2015). doi: 10.1016/j.msea.2015.04.096
• [2] B. Guo, X. Guo, Mater. Sci. Eng. A, 617, 39-45 (2014). doi: 10.1016/j.msea.2014.08.009
• [3] X. Ma, X. Guo, M. Fu, H. Guo, Scripta Mater. 139, 108-113 (2017). doi: 10.1016/j.scriptamat.2017.06.035
• [4] Y. Tang, X. Guo, J. Alloy Compd. 731, 985-994 (2018). doi: 10.1016/j.jallcom.2017.10.122
• [5] Y. Guo, L. Jia, B. Kong, S. Zhang, J. Sha, H. Zhang, J. Alloy Compd. 696, 516-521 (2017). doi: 10.1016/j.jallcom.2016.11.23
• [6] Y. Sainan, J. Lina, S. Linfen, M. Limin, Z. Hu, Intermetallics 38, 102-106 (2013). doi: 10.1016/j.intermet.2013.02.022
• [7] W. Kim, H. Tanaka, S. Hanada, Intermetallics 10, 2002, 625-634 (2002). doi: 10.1016/S0966-9795(02)00041-9
• [8] J. L. Yu, X. D. Weng, N. L. Zhu, H. Liu, F. Wang, Y. C. Li, X. M. Cai, Z. W. Hu, Intermetallics 90, 135-139 (2017). doi: 10.1016/j.inter-met.2017.07.014
• [9] P. Tsakiropoulos, Materials 11, 1-19 (2018). doi: 10.3390/ma11010069.
• [10] X. Ma, X. Guo, M. Fu, Y. Qiao, Intermetallics 70, 17-23 (2016). doi: 10.1016/j.intermet.2015.11.001
• [11] Y. Kang, Y. Yan, J. Song, H. Ding, Mater. Sci. Eng. A, 599, 87-91 (2014). doi: 10.1016/j.msea.2014.01.077
• [12] P. Maji, R. Mitra, K. K. Ray, Intermetallics 85, 34-47 (2017). doi: 10.1016/j.intermet.2017.01.012
• [13] Y. Guo, L. Jia, B. Kong, H. Zhang, H. Zhang, Intermetallics 92, 1-6 (2018). doi: 10.1016/j.intermet.2017.09.005
• [14] M.-L. Wu, S-S. Li, L.-L. Jiang, S.-K. Gong, Y.-F. Han, Pro. Nat. Sci.-Mater. 21, 139-145 (2011). doi.org/10.1016/S1002-0071(12)60047-1
• [15] F. Wang, L. Luo, Y. Xu, X. Meng, L. Wang, B. Han, Y. Su, J. Guo, H. Fu, Intermetallics 88, 6-13 (2017). doi: 10.1016/j.intermet.2017.04.018
• [16] K. Zelenitsas, P. Tsakiropoulos, Intermetallics 13, 1079-1095 (2005). doi: 10.1016/j.intermet.2005.02.002
• [17] T. Fei, Y. Yu, C. Zhou, J. Sha, Mater. Design 116, 92-98 (2017). doi: 10.1016/j.matdes.2016.12.001
• [18] J.-H. Kim, T. Tabaru, M. Sakamoto, S. Hanada, Mater. Sci. Eng. A 372, 137-144 (2004). doi: 10.1016/j.msea.2003.12.010
• [19] K. Geethasree, Md. Zafir Alam, G. Brahma Raju, V. V. Satya Prasad, Materials Today: Proceedings 15, 36-43 (2019). doi.org/10.1016/j.matpr.2019.05.021
• [20] Y. Guo, L. Jia, B. Kong, F. Zhang, J. Liu, H. Zhang, Corros. Sci. 127, 260-269 (2017). doi: 10.1016/j.corsci.2017.08.022
• [21] R. Dicks, F. Wang, X. Wu, J Mater. Process. Tech. 209, 1754-1757 (2009). doi:10.1016/j.jmatprotec.2008.04.042
• [22] J. L. Yu, K. F. Zhang, Scripta Mater. 59,714-717 (2008). doi: 10.1016/j.scriptamat.2008.05.035
• [23] J. L. Yu, Z. K. Li, K. F. Zhang, X. Zheng, J. J. Zhang, R. Bai, W. S. Wang, Mater. Sci. Eng. A, 527, 5230-5233 (2010). doi: 10.1016/j.msea.2010.04.068
• [24] X. Zhang, Y. Li, X. He, X. Liu, Q. Jiang, Y. Sun, Mater. Sci. Eng. A 646, 332-340 (2015). doi: 10.1016/j.msea.2015.08.014
• [25] B. Xiong, C. Cai, Z. Wang, J. Alloy Compd. 583, 574-577 (2014). doi:10.1016/j.jallcom.2013.08.151
• [26] Z. Chen, Y. W. Yan, J. Alloy Compd. 413, 73-76 (2006). doi: 10.1016/j.jallcom.2005.06.005
• [27] Y. Garip, O. Ozdemir, J. Alloy Compd. 780, 364-377 (2019). doi: 10.1016/j.jallcom.2018.11.324
• [28] S. Grasso, Y. Sakka, G. Maizza, Sci. Technol. Adv. Mater. 10, 1-24 (2009). doi: 10.1088/1468-6996/10/5/053001
• [29] Y. Garip, O. Ozdemir, Metall. Mater. Trans. A, 49A, 2455-2462 (2018). doi: 10.1007/s11661-018-4581-8
• [30] R. Orru, R. Licheri, A. M. Locci, A. Cincotti, G. Cao, Mater. Sci. Eng. R 63, 127-287 (2009). doi: 10.1016/j.mser.2008.09.003
• [31] Z. Li, L. M. Peng, Acta Mater. 55, 6573-6585 (2007). doi: 10.1016/j.actamat.2007.08.012
• [32] J.-C. Zhao, M. R. Jackson, L. A. Peluso, Mater. Sci. Eng. A 372, 21-27 (2004). doi: 10.1016/j.msea.2003.08.008
• [33] Y. Zhang, T. T. Zuo, Z. Tang, M. C. Gao, K. A. Dahmen, P. K. Liaw, Z. P. Lu, Prog. Mater. Sci. 61, 1-93 (2014). doi: 10.1016/j.pmats-ci.2013.10.001
• [34] A. L. Rominiyi, M. B. Shongwe, N. Maledi, B. J. Babalola, P. A. Olubambi, Int. J. Adv. Manuf. Technol. 1041-1049 (2019). doi: 10.1007/s00170-019-03950-5
• [35] M. G. Mendiratta, J. J. Lewandowski, D. M. Dimiduk, Metall. Mater. Trans. A, 22A, 1573-1583 (1991). doi: 10.1007/BF02667370
• [36] S. Kashyap, C. S. Tiwary, K. Chattopadhyay, Mater. Sci. Eng. A 583, 188-198 (2013). doi: 10.1016/j.msea.2013.06.045

Uwagi

EN

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).