Fabrication of temperature sensor based on copper oxide nanowires grown on titanium coated glass substrate

• Autorzy: Aljubouri A. A. , Faisal A. D. , Khalef W. K.

Identyfikatory

DOI

10.2478/msp-2018-0051

• Języki publikacji: EN

Abstrakty

EN

Single phase, adherent films of copper oxide nanowires (CuO NWs) were successfully grown on a glass substrate. Titanium nanofilm was pre-coated on the glass substrate to assist the growth of a layer adherent to the substrate. The copper film of 1.5 μm thickness was deposited via physical vapor deposition technique followed by thermal oxidation in air at various temperatures for 4 h. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible (UV-Vis) and Fourier transformation infrared (FT-IR) spectroscopy to find the crystal structure, morphology, phases, and optical properties of the deposited films. The CuO NWs film with 60 % transmittance at wavelengths greater than 800 nm was obtained. It can be used as an infrared thermal imaging filter and in optoelectronic devices. The fabricated temperature sensor exhibited high sensitivity in the temperature range of 20 °C to 180 °C.

Słowa kluczowe

EN

nanowires; temperature sensor; energy gap; activation energy; sensitivity

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2018
• Tom: Vol. 36, No. 3
• Strony: 460--468
• Opis fizyczny: Bibliogr. 49 poz., rys., tab.

Twórcy

autor

Aljubouri A. A.

• University of Technology, Applied Science Department, Baghdad, Iraq

autor

Faisal A. D.

• University of Technology, Applied Science Department, Baghdad, Iraq

autor

Khalef W. K.

• University of Technology, Applied Science Department, Baghdad, Iraq

Bibliografia

• [1] JAYATISSA A.H., GUO K., JAYASURIYA A.C., Appl. Surf. Sci., 255 (2009), 9474.
• [2] OOI P.K., NG S.S., ABDULLAH M.J., HASSAN H.A., HASSAN Z., Mater. Chem. Phys., 140 (2013), 243.
• [3] PHAM T.V., RAO M., ANDREASSON P., PENG Y., WANG J., JINESH K.B., Appl. Phys Lett., 102 (2013), 032101.
• [4] NECMI S., TULAY S., SEYDA H., YASEMIN C., Semicond. Sci. Tech., 20 (2005), 398.
• [5] DING T., YANG X., BAI L., ZHAO Y., FONG K.E., WANG N., DEMIR H.V., SUN X.W., Org. Electron., 26 (2015), 245.
• [6] CHANG T.H., HSU C.Y., LIN H.C., CHANG K.H., LI Y.Y., J. Alloy. Compd., 644 (2015), 324.
• [7] SEONGWAN J., YOUNG J.S., SANG H.J., KANG H.P., Catal. Commun., 81 (2016), 24.
• [8] LI A., SONG H., WAN W., ZHOU J., CHEN X., Electrochim. Acta., 132 (2014), 42.
• [9] KHALIDA A., IKRAM U.H., KHAN M., Powder Technol., 283 (2015), 505.
• [10] DAHRUL M., ALATAS H., IRZAMAN, Procedia Environ. Sci., 33 (2016), 661.
• [11] VIDYADHARAN B., MISNON I.I., ISMAIL J., YUSOFF M.M., R. JOSE., J. Alloy. Compd., 633 (2015), 22.
• [12] JANG J., CHUNG S., KANG H., SUBRAMANIAN V., Thin Solid Films, 600 (2016), 157.
• [13] ZHANG Q., ZHANG K., XU D., YANG G., HUANG H., NIE F., LIU C., YANG S., Prog. Mater. Sci., 60 (2014), 208.
• [14] ZHAO X., WANG P., GAO Y., XU X., XAN Z., REN N., Mater. Lett., 132 (2014), 409.
• [15] MUHAMMAD T.S.C., KHASAN S.K., SHER B.K., ABDULLAH M.A., Sensor. Actuat. A-Phys., 246 (2016), 58.
• [16] HSUEH H.T., HSUEH T.J., CHANG S.J., HUNG F.Y., TSAI T.Y., WENG W.J., HSU C.L., DAI B.T., Sensor. Actuat. B-Chem., 156 (2011), 906.
• [17] SHER B.K., MUHAMMAD T.S.C., KARIMOV K.S., ABDULLHA M.A., MEHRAN B., RANA T., Talanta, 120 (2014), 443.
• [18] ROBERT B., LOUIS N., Electronic Devices and Circuit Theory, Prentice-Hall, New Jersey, 2006.
• [19] MA C., ZHU L., CHEN S., ZHAO Y., Mater. Lett., 108 (2013), 114
• [20] SAHOOLI M., SABBAGHI S., SABOORI R., J. Mater. Sci. Lett., 81 (2012), 169.
• [21] JIA W., REITZ E., SHIMPI P., RODRIGUEZ E.G., GAO P.X., LEI Y., Mater. Res. Bull., 44 (2009), 1681.
• [22] MOHAMED R.M., HARRAZ F.A., SHAWKY A., Ceram. Int., 40 (2014), 2127.
• [23] DAR M.A., KIM Y.S., KIM W.B., SOHN J.M., SHIN H.S.J., Appl. Surf. Sci., 254 (2008), 7477.
• [24] IBUPOTO Z.H., KHUN K., LU J., WILLANDER M., Appl. Phys. Lett., 102 (2013), 103701.
• [25] MUKHERJEE N., SHOW B., MAJI S.K., MADHU U., BHAR S.K., MITRA B.C., KHAN G.G., MONDAL A., Mater. Lett., 65 (2011), 3248.
• [26] ZHAO J., LIU R., HUA Z., Superlattice. Microst., 81 (2015), 243.
• [27] YU Q., HUANG H., CHEN R., WANG P., YANG H., GAO M., PENG X., YE Z., Nanoscale, 4 (2012), 2613.
• [28] ANANDAN S., LEE G., WU J.J., Ultrason. Sonochem., 19 (2012), 682.
• [29] TOBOONSUNG B., SINGJAI P., J. Alloy. Compd., 509 (2011), 4132.
• [30] MALLICK P., SAHU S., Nanosci. Nanotechnol., 2 (2012), 71.
• [31] LAMRIZEGGARA M., GHABANE L., AIDA M.S., ATTAF N., ZEBBAR N., Mater. Sci. Semicon. Proc., 30 (2015), 645.
• [32] FENG J.K., XIA H., LAI M.O., LU L., Mater. Res. Bull., 46 (2011), 424.
• [33] JUNG A., CHO S., CHO W., LEE K.-H., Korean J. Chem. Eng., 29 (2012), 243.
• [34] SIDDIQUI H., QURESHI M.S., HAQUE F.Z., Int. J. Sci. Eng. Res., 5 (2014), 173.
• [35] ZHU Y.F., ZHOU G.H., LIN Y.B., LIU L., Cryst. Res. Technol., 47 (2012), 658.
• [36] CHEN A., LONG H., LI X., LI Y., YANG G., LU P., Vacuum, 83 (2009), 927.
• [37] VISALAKSHI S., KANNAN R., VALANARASU S., KATHALINGAM A., RAJASHABALA S., J. Mater. Sci.- Mater. El., 27 (2016), 9179.
• [38] GOLI M., HARATIZADEH H., ABRISHAMI M.E., Ceram. Int., 40 (2014), 16071.
• [39] MEMA R., YUAN L., DU Q., WANG Y., ZHOU G., Chem. Phys. Lett., 512 (2011), 87.
• [40] YUAN L., WANG Y., MEMA R., ZHOU G., Acta Mater., 59 (2011), 2491.
• [41] KIM Y.S., HWANG I.S., KIM S.J., LEE C.Y., LEE J.H., Sensor. Actuat. B-Chem., 135 (2008), 298.
• [42] WILLIAM D.C., Materials Science and Engineering: An Introduction, John Wiley and Sons Inc., New York, 1997.
• [43] AKALTUN Y., ÇAYIR, T., J. Alloy. Compd., 625 (2015), 144.
• [44] JOHAN M.R., SUAN M.S.M., HAWARI N.L., CHING H.A., Int. J. Electrochem. Sc., 6 (2011), 6094.
• [45] DODOO-ARHIN D., LEONI M., SCARDI P., Mol. Cryst. Liq. Cryst., 555 (2012), 17.
• [46] SRIVASTAVA R., Int. J. Pure Appl. Sci. Technol., 14 (2013), 9.
• [47] CHENG S.L., CHEN M.F., Nanoscale Res. Lett., 7 (2012), 119.
• [48] ORTON J.W., POWELL M.J., Rep. Prog. Phys., 43 (1980), 1263.
• [49] SISMAN O., KILINC N., OZTURK Z.Z., Sensor. Actuat. B-Chem., 236 (2016), 1118.