Adhesion of SiO2 layers deposited by means of sol-gel and ALD methods on 316LVM steel

• Autorzy: Basiaga M. , Walke W. , Kajzer A. , Kajzer W. , Staszuk M. , Kurtyka P.
• Konferencja: Biomaterials in medicine and veterinary medicine : 25th anniversary conference : 13-16 October 2016, Rytro, Poland
• Języki publikacji: EN

Słowa kluczowe

EN

ALD method; thin oxide films; biomaterials

• Wydawca: Polish Society for Biomaterials in Cracow
• Czasopismo: Engineering of Biomaterials
• Rocznik: 2016
• Tom: Vol. 19, no. 138 spec. iss.
• Strony: 114
• Opis fizyczny: Bibliogr. 3 poz.

Twórcy

autor

Basiaga M.

• Department of Biomaterials and Medical Engineering Devices, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze

autor

Walke W.

• Department of Biomaterials and Medical Engineering Devices, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze

autor

Kajzer A.

• Department of Biomaterials and Medical Engineering Devices, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze

autor

Kajzer W.

• Department of Biomaterials and Medical Engineering Devices, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze

autor

Staszuk M.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice

autor

Kurtyka P.

• Department of Biomaterials and Medical Engineering Devices, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze

Bibliografia

• [1] S. Pourhashem, A. Afshar: Double layer bioglasssilica coatings on 316L stainless steel by sol-gel method. Ceramics International 40 (2014) 993-1000.
• [2] W. Walke, et al., Evalutaion of physicochemical properties of SiO2-coated stainless steel after sterilization. Materials Science and Engineering: C 63 1 (2016) 155-163.
• [3]Standard: ASTM F2129 - Electrochemical Corrosion Testing of Surgical Implants (Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices).

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).