Influence of PAA on the Microstructure and Corrosion Resistance of Electrophoretically Deposited SiO2 and Ni/SiO2 Coatings on X2CrNiMo17-12-2 Steel

• Autorzy: Ratajski T. , Kalemba-Rec I. , Dubiel B.

Identyfikatory

DOI

10.1515/amm-2017-0307

• Języki publikacji: EN

Abstrakty

EN

The effect of anionic surfactant in the form of polyacrylic acid (PAA) on the electrophoretic deposition of the SiO₂ and Ni/SiO₂ coatings on X2CrNiMo17-12-2 stainless steel was examined. Parameters of the process, such as chemical composition of the suspensions, voltage between the electrodes and the deposition time were experimentally selected. Zeta potential measurements showed a beneficial effect of polyacrylic acid on the SiO₂ and Ni particles stability in ethanol. Scanning and transmission electron microscopy studies revealed that the microstructure of the coatings obtained from the suspensions containing polyelectrolyte is more homogenous and has less amount of desiccation cracks on the surface. The results of the polarization tests have shown that addition of anionic surfactant improves also corrosion resistance of the coatings in 3.5% NaCl solution.

Słowa kluczowe

EN

electrophoretic deposition (EPD); electrosteric stabilization; SiO2 coatings; nanocomposite Ni/SiO2 coatings; PAA

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2073--2079
• Opis fizyczny: Bibliogr. 28 poz., rys., tab., wykr.

Twórcy

autor

Ratajski T.

• AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al.Mickiewicza 30, 30-059 Kraków, Poland

autor

Kalemba-Rec I.

• AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al.Mickiewicza 30, 30-059 Kraków, Poland

autor

Dubiel B.

• AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al.Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] J. H. Dickerson, A. R. Boccaccini, Electrophoretic deposition of nanoparticles, Springer, 2012.
• [2] J. Cho, S. Schaab, J. A. Roether, A. R. Boccaccini, J. Nanopart. Res. 10, 99-105 (2008).
• [3] Z. Weng, J. Shemilt, P. Xiao, J. Eur. Ceram. Soc. 22, 183-189 (2002).
• [4] M. Miola, E. Verne, F. E. Ciraldo, L. Cordero-Arias, A. R. Boccaccini, Front. Bioeng. Biotechnol. 3 (2015) doi: 10.3389/fbioe.2015.00159.
• [5] D. Jugowiec, M. Kot, T. Moskalewicz, Arch. Metall. Mater. 61, 657-664 (2016).
• [6] S. Dor, S. Rühle, A. Ofir, M. Adler, L. Grinis, A. Zaban, Colloid. Surface. A. 342, 70-75 (2009).
• [7] Q. He, Investigation of stabilization mechanisms for colloidal suspension using nanoparticles, University of Louisville, USA (2014).
• [8] G. D. Parfitt, Dispersion of Powders in Liquids, Third Edition, Applied Science, London (1981).
• [9] J. Widegren, L. Bergstrom, J. Am. Cer. Soc. 85, 523-528 (2002).
• [10] S. Zafar, L. M. Negi, A. K. Verma, V. Kumar, A. Tyagi, P. Singh, Z. Igbal, S. Talegaonkar, Int. J. Pharm. 477, 454-468 (2014).
• [11] H. Yang, D. Chen, T. G. M. van de Ven, Cellulose. 22, 1743-1752 (2015).
• [12] R. Greenwood, K. Kendall, J. Eur. Ceram. Soc. 19, 479-488 (1999).
• [13] J. Hang, L. Shi, X. Feng, L. Xiao, Powder Technol. 192, 166-170 (2009).
• [14] J. Cesarano, I.A. Aksay, J. Am. Ceram. Soc. 71, 1062-1067 (1988.)
• [15] Y. Castro, B. Ferrari, R. Moreno, A. Duran, Surf. Coat. Technol. 191, 228-235 (2005).
• [16] P. De Lima Neto, M. Atik, L. A. Avaca, M. A. Aegerter, J. Sol-Gel Sci. Technol. 2, 529-534 (1994).
• [17] H. Gül, F. Kilic, S. Aslan, A. Alp, H. Akbulut, Wear 267, 976-990 (2009).
• [18] B. Xu, H. Wang, S. Dong, B. Jiang, W. Tu, B. Xu, H. Wang, S. Dong, B. Jiang, W. Tu, Electrochem. Commun. 7, 572-575 (2005).
• [19] M. Wiśniewska, J. Therm. Anal. Calorim. 101, 753-760 (2010).
• [20] X. Shi, S. Xu, J. Lin, S. Feng, J. Wang, Mater. Lett. 63, 527-529 (2009).
• [21] M. Wiśniewska, T. Urban, E. Grządka, V. I. Zarko, V.M. Gun’ko, Colloid Polym. Sci. 292 (3), 699-705 (2014).
• [22] Z. Pan, A. Campbell, P. Somasundaran, Colloids Surf. A Physicochem. Eng. Asp. 191, 71-78 (2001).
• [23] E. H. Lee, M. K. Lee, C. K. Rhee, Mater. Sci. Forum 510, 206-209 (2006).
• [24] A. Charlot, X. Deschanels, G. Toquer, Thin Solid Films. 553, 148-152 (2014).
• [25] F. Shi, M. F. De Riccardis, Ceramic Coatings – Applications – Applications in Engineering, InTech, 2012.
• [26] H. S. Jahromi, Int. J. Thin Film Sci. Tec. 2, 245-260 (2013).
• [27] S. A. Umoren, Y. Li, F. H. Wang, J. Solid State Electrochem. 14, 2293-2305 (2010).
• [28] L. Y. Cui, R. C. Zeng, S. Q. Li, F. Zhang, E. H. Han, RSC Adv. 6, 63017-63116 (2016).

Uwagi

EN

The work was supported by the AGH-UST project no. 15.11.110.424.

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).