Effect of temperature, load and sliding velocity on the wear behavior of AA7075-SIC composites

• Autorzy: Shanmughasundaram P.
• Języki publikacji: EN

Abstrakty

EN

Dry sliding wear behavior of a aluminum matrix reinforced with SiC composite was investigated under three different temperatures (30°C, 60°C, 90°C), three different load and sliding velocities against a EN 32 carbon steel counter face. Results showed that load and temperature have significant effect on the wear loss. Wear resistance of the composites decrease with temperature, load and sliding velocity within the observed range. Taguchi method was used to find the significance of the parameters. Analysis of variance (ANOVA) was used to investigate the influence of parameters on the wear resistance. It was found that the load was the most dominant factor influencing the wear followed by temperature and sliding velocity.

Słowa kluczowe

EN

dry sliding wear; temperature; load; sliding velocity; Taguchi; ANOVA

PL

sucho-ślizgowe zużycie powierzchni; temperatura; obciążenie; prędkość ślizgania; Taguchi; ANOVA

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2017
• Tom: Vol. 21, nr 1
• Strony: 85--93
• Opis fizyczny: Bibliogr. 13 poz., fot. kolor., wykr.

Twórcy

autor

Shanmughasundaram P.

• Department of Automobile Engineering, Karpagam University, Coimbatore-641021, India

Bibliografia

• [1] Lee, G. Y., Dharan, C. K. H. and Ritchie, R. O.: A physically-based abrasive wear model for composite materials, Wear, 252, 322-331, 2002.
• [2] Singh, J. and Alpas, A. T.: High-temperature wear and deformation processes in metal matrix composites, Metallurgical and Materials Transactions, A, 27, 3135-3148, 1996.
• [3] Farhadinia, F. and Sedghi, A.: Wear behaviour of Al/(Al2O3 + ZrB2 + TiB2) hybrid composites fabricated by hot pressing, International Journal of Materials Research, 106, (2), 160-165, 2015.
• [4] Rajan, M. H. B., Ramabalan, S., Dinaharan, I. and Vijay, S. J.: Effect of TiB2 content and temperature on sliding wear behavior of AA7075/TiB2 in situ aluminum cast composite, Archives of Civil and Mechanical Engineering, 14, 72-79, 2014.
• [5] Hui, L. Y., Jun, D., Rong, Y. S. and Wei, W.: High temperature friction and wear behavior of Al2O3 and/or carbon short fibre reinforced Al-12Si alloy composites, Wear, 256, 3-4, 275-285, 2004.
• [6] Natarajan, S., Narayanasamy, R., Kumaresh Babu, S. P., Dinesh, G., Anil Kumar, B. and Sivaprasad, K.: Sliding wear behaviour of Al6063/TiB2 in situ composites at elevated temperature, Materials and Design, 30, 7, 2521-2531,2009.
• [7] Valefi, M., de Rooij, M., Schipper, D. J. and Winnubst, L.: Effect of temperature on friction and wear behaviour of CuO-zirconia composites , Journal of the European Ceramic Society, 32, 10, 2235-2242, 2012.
• [8] Kumar, S., Subramanya Sarma, V. and Murty, B. S.: High temperature wear behavior of Al-4Cu-TiB2 in situ composites, Wear, 268, 11-12, 1266-1274, 2010.
• [9] Hernandez, S, Hardell, J, Courbon, C, Winkelmann, H and Prakash, B.: High temperature friction and wear mechanism map for tool steel and boron steel tribopair, Tribology (Leeds), 8, 2, 74-84, 2014.
• [10] Mousavi Abarghouie, S.M.R. and Seyed Reihani, S. M.: Investigation of friction and wear behaviors of 2024 Al/SiCp composite at elevated temperatures, J. Alloys and Comp., 501, 2, 326-332, 2010.
• [11] Gomez-del Rio, T., Rico, A., Garrido, M. A., Poza, P. and Rodriguez, J.: Temperature and velocity transitions in dry sliding wear of Al-Li/SiC composites, Wear, 268, 5-6, 700-707, 2010.
• [12] Dwivedi, D. K:, Sliding temperature and wear behaviour of cast Al-Si-Mg alloys, Materials Science and Engineering, A, 382, 328-334, 2004.
• [13] Rajaram, G., Kumaran, S. and Srinivasa Rao, T.: High temperature tensile and wear behaviour of aluminum silicon alloy, Materials Science and Engineering, A, 528, 247-253, 2010.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).