Numerical Analysis of a Skew Rolling Process for Producing a Stepped Hollow Shaft Made of Titanium Alloy Ti6Al4V

• Autorzy: Pater Z. , Bulzak T. , Tomczak J.

Identyfikatory

DOI

10.1515/amm-2016-0115

• Języki publikacji: EN

Abstrakty

EN

The paper describes a rolling process for a hollow Ti6Al4V alloy shaft used in driving systems of light trucks. The shaft is formed by skew rolling using three tapered rolls. The principle of this forming process was discussed stressing its universality due to the potential of applying it for forming various products by one set of rolls. The numerical analysis results (product shape progression in rolling, wall thickness distribution, effective strain, temperature and variations in loads and torques) confirm that the proposed technique can be used for producing hollow long shafts.

Słowa kluczowe

EN

skew rolling; hollow shaft; titanium alloy; numerical analysis

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 677--682
• Opis fizyczny: Bibliogr. 19 poz., rys.

Twórcy

autor

Pater Z.

• Lublin University of Technology, 36 Nadbystrzycka str., 20-618 Lublin, Poland

autor

Bulzak T.

• Lublin University of Technology, 36 Nadbystrzycka str., 20-618 Lublin, Poland

autor

Tomczak J.

• Lublin University of Technology, 36 Nadbystrzycka str., 20-618 Lublin, Poland

Bibliografia

• [1] S. Zheng, W.Peng, X. Shu, Applied Mechanics and Materials 201-202, 1071-1075 (2012). ]
• [2] M. Dohi, H.Kamiyama, S. Nishida, Y. Kotani, H. Watari, Applied Mechanics and Materials 705, 44-50 (2014).
• [3] S. K. Kim, Materials Science Forum 510-511, 834-837 (2006).
• [4] G. Quintenz, H-W. Raedt, ATZ worldwide 111 30-33 (2009).
• [5] Q. Zhang , K. Jin, D. Mu, Y. Zhang, Y. Li, Int. J. Adv. Manuf. Technol. 80, 2015-2026 (2015).
• [6] H. Tang, C. Hao, Y. Jiang, et al., Acta Metallurgica Sinica 23, 72-80 (2010).
• [7] S. J. Lim, H. J. Choi, C. H. Lee, Journal of Materials Processing Technology 209, 283-288 (2009) .
• [8] P. Kettner, F. Schmieder, Journal of Material Processing Technology 71, 113-118 (1997).
• [9] G. C. Wang, G. Q. Zhao, X.-H. Huang, et al., Journal of Materials Processing Technology 121, 259-264 (2002).
• [10] Z. Pater, A. Gontarz, J. Tomczak, T. Bulzak, Archives of Civil and Mechanical Engineering. 15, 917-924 (2015).
• [11] P. Skubisz, Ł. Lisiecki, J. Sińczak, Metalurgija 54, 339-342 (2015).
• [12] Y. Yang, F. Cheng, J. Chen, J. Zhao, Applied Mechanics and Materials 288, 267-270 (2013) .
• [13] Á. Mangas, M. Santos, J. I. Zarazua, I. Pérez, Key Engineering Materials 651-653, 254-259 (2015)
• [14] P. K. Teterin, Teorija poperecnoi i vintovoi prokatki, Metallurgija, Moskva 1983.
• [15] I. N. Potapov, P.I. Polukhin, Tekhnologija vintovoi prokatki, Metallurgija, Moskva, 1990.
• [16] Z. Pater, , Hutnik-WH. 82, 147-152 (2015).
• [17] Z. Pater, J. Tomczak, T. Bulzak, Hutnik-WK. 82, 599-603 (2015).
• [18] Z. Pater, J. Tomczak, T. Bulzak, Metalurgija 54, 627-630 (2015).
• [19] M. J. Donachie, Titanium. A Technical Guide, Ohio 2000.