Substrate Texture Influence on the Dry Sliding Wear Behaviour of Co-Based Plasma Spray Coating

• Autorzy: Cristisor Daniel , Chicet Daniela Lucia , Cirlan Paleu Cornelia , Stescu Cristian , Munteanu Corneliu

Identyfikatory

DOI

10.24425/amm.2023.145476

• Języki publikacji: EN

Abstrakty

EN

The mechanism in which the coatings made by thermal spraying adhere to the substrate is in most cases of a mechanical nature, thus being dependent on the morphology of the substrate surface. This paper study how the texture of the substrate influences the behavior of dry sliding wear, a behavior based on the adhesion to the substrate of the analyzed coatings. For this purpose, a Co - base powder, was chosen for atmospheric plasma spraying. For the substrate, a rectangular profile made of low-alloy steel was chosen, the surface of which was textured by mechanical abrasion, in order to obtain different degrees of roughness: sample S1 - Ra1 = 1.59 µm, sample S2 - Ra2 = 2.32 µm, sample 3 - Ra3.1 = 1.25 μm, Ra3.2 = 3.88 μm. In the case of sample 3, the texturing was done on one direction, with an elongated profile, so that the effect of the main direction of dry sliding wear on the quality of the coating could be studied. The tests were performed on an Amsler test machine, at constant load, for 1 hour. The samples were mounted in a fixed position, and the wear occurred on the basis of the rotation of the metal disc, without lubrication. It was found that the coating of sample 1 was the most affected, resulting even a partial delamination, and the best behavior was recorded in the case of sample 3.1.

Słowa kluczowe

EN

Co-base coating; substrate texture; plasma spray coating; dry sliding wear

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 3
• Strony: 1061--1067
• Opis fizyczny: Bibliogr. 30 poz., fot., rys., tab.

Twórcy

autor

Cristisor Daniel

• Gheorghe Asachi Technical University of Iasi, Department of Mechanical Engineering, Blvd. Mangeron, No. 61, 700050, Iasi, Romania

• https://orcid.org/0000-0002-9192-7455

autor

Chicet Daniela Lucia

• Gheorghe Asachi Technical University of Iasi, Department of Materials Science and Engineering, Blvd. Mangeron, No. 41, 700050, Iasi, Romania

• https://orcid.org/0000-0002-0904-4355

autor

Cirlan Paleu Cornelia

• Gheorghe Asachi Technical University of Iasi, Department of Mechanical Engineering, Blvd. Mangeron, No. 61, 700050, Iasi, Romania

• https://orcid.org/0000-0002-0863-787X

autor

Stescu Cristian

• Gheorghe Asachi Technical University of Iasi, Department of Mechanical Engineering, Blvd. Mangeron, No. 61, 700050, Iasi, Romania

• https://orcid.org/0000-0003-0078-782X

autor

Munteanu Corneliu

• Gheorghe Asachi Technical University of Iasi, Department of Mechanical Engineering, Blvd. Mangeron, No. 61, 700050, Iasi, Romania
• Technical Sciences Academy of Romania, 26 Dacia Blvd, Bucharest, 030167, Romania

• https://orcid.org/0000-0002-3878-9129

Bibliografia

• [1] C. Paulin, D.L. Chicet, B. Istrate, M. Panturu, C. Munteanu, Corrosion behavior aspects of Ni-base self-fluxing coatings, IOP Conference Series: Materials Science and Engineering 147, 012034 (2016). DOI: http://dx.doi.org/10.1088/1757-899X/147/1/012034
• [2] B. Istrate, C. Munteanu, M.N. Matei, B. Oprisan, D. Chicet, K. Earar, Influence of ZrO2 - Y2O3 and ZrO2 - CaO coatings on microstructural and mechanical properties on Mg - 1,3 Ca - 5,5 Zr biodegradable alloy, IOP Conference Series: Materials Science and Engineering 133 (1), 012010 (2016).
• [3] S.L. Toma, M. Badescu, I. Ionita, M. Ciocoiu, L. Eva, Influence of the spraying distance and jet temperature on the porosity and adhesion of the Ti depositions, obtained by thermal spraying in electric arc - Thermal activated, Applied Mechanics and Materials 657, 296-300 (2014). DOI: http://dx.doi.org/10.1088/1757-899X/572/1/012056
• [4] Z.W. Zhong, Z.F. Peng, N. Liu, Surface roughness characterization of thermally sprayed and precision machined WC-Co and Alloy-625 coatings, Materials Characterization 58, 997-1005 (2007). DOI: http://dx.doi.org/10.1016/j.matchar.2007.05.010
• [5] C.C. Paleu, C. Munteanu, B. Istrate, S. Bhaumik, P. Vizureanu, M.S. Bălţatu, & V. Paleu, Microstructural Analysis and Tribological Behavior of AMDRY 1371 (Mo-NiCrFeBSiC) Atmospheric Plasma Spray Deposited Thin Coatings. Coatings, 10(12), 1186 (2020). DOI: http://dx.doi.org/10.3390/coatings10121186
• [6] S. Singh, H. Singh, S. Chaudhary, R.K. Buddu, Effect of substrate surface roughness on properties of cold-sprayed copper coatings on SS316L steel, Surf&Coat Technology 389, 125619 (2020). DOI: http://dx.doi.org/10.1016/j.surfcoat.2020.125619
• [7] B.V. Padmini, H.B. Niranjan, Ranjeet Kumar, G. Padmavathi, N. Nagabhushana, N. Mohan, Influence of substrate roughness on the wear behaviour of kinetic spray coating, Materials Today: Proceedings 27, 2498-2502 (2020).
• [8] M. Panturu, D. Chicet, S. Lupescu, B. Istrate, C. Munteanu, Applications of ceramic coatings as TBCs on the internal combustion engine valves, Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering 61, 137 (2018).
• [9] B. Istrate, C. Munteanu, S. Lupescu, M. Benchea, P. Vizureanu, Preliminary Microstructural and Microscratch Results of Ni-Cr-Fe and Cr3C2-NiCr Coatings on Magnesium Substrate, IOP Conference Series: Materials Science and Engineering 209, 012024 (2017) DOI: http://dx.doi.org/10.1088/1757-899X/209/1/012024
• [10] R.A. Haraga, C. Bejinariu, A. Cazac, B.F. Toma, C. Baciu, S.L. Toma, Influence of surface roughness and current intensity on the adhesion of high alloyed steel deposits-obtained by thermal spraying in electric arc, IOP Conference Series: Materials Science and Engineering, Volume 572, Issue 1, 2, 012056 (2019). DOI: http://dx.doi.org/10.1088/1757-899X/572/1/012056
• [11] A. Nourian, S. Müftü, Effect of substrate surface finish and particle velocity on fatigue performance of cold spray coated A6061 aluminum alloy, Surface & Coatings Technology 444, 128676 (2022). DOI: https://doi.org/10.1016/j.surfcoat.2022.128676
• [12] S.L. Toma, D.L. Chicet, A.M. Cazac, Numerical Calculation of the Arc-Sprayed Particles’ Temperature in Transient Thermal Field, Coatings 12 (7), 877 (2022). DOI: http://dx.doi.org/10.3390/coatings12070877
• [13] D. Garcia-Alonso, N. Serres, C. Demian, S. Costil, C. Langlade, C. Coddet, Pre-/During-/Post-Laser Processes to Enhance the Adhesion and Mechanical Properties of Thermal-Sprayed Coatings with a Reduced Environmental Impact, Journal of Thermal Spray Technology 20 (4), 719 (2011). DOI: http://dx.doi.org/10.1007/s11666-011-9629-x
• [14] C. Paulin, D. Chicet, V. Paleu, M. Benchea, Ș. Lupescu, C. Munteanu, Dry friction aspects of Ni-based self-fluxing flame sprayed coatings. IOP Conf. Ser. Mater. Sci. Eng. 227, 012091 (2017). DOI: http://dx.doi.org/10.1088/1757-899X/227/1/012091
• [15] G. Bolelli, M.F. Bonilauri, P. Sassatelli, F. Bruno, R. Franci, G. Pulci, F. Marra, L. Paglia, G.C. Gazzadi, S. Frabboni, L. Lusvarghi, Pre-treatment of Selective Laser Melting (SLM) surfaces for thermal spray coating, Surface & Coatings Technology 441, 128533 (2022). DOI: https://dx.doi.org/10.1016/j.surfcoat.2022.128533
• [16] R.J. Talib, S. Saad, M.R.M. Toff, H. Hashim, Thermal spray coating technology - a review, Solid State Science and Technology, 11, 1, 109-117 (2003).
• [17] R.S.C. Paredes, S.C. Amico, A.S.C.M. d’Oliveira, The effect of roughness and pre-heating of the substrate on the morphology of aluminium coatings deposited by thermal spraying, Surface & Coatings Technology 200, 3049-3055 (2006). DOI: https://doi.org/10.1016/j.surfcoat.2005.02.200
• [18] D.S. Park, M.W. Cho, H. Lee, W.S. Cho, J., Micro-grooving of glass using micro-abrasive jet machining, Mater. Process. Technol. 146, 234 (2004). DOI: http://dx.doi.org/10.1016/j.jmatprotec.2003.11.013
• [19] X.P. Jiang, X.Y. Wang, J.X. Li, D.Y. Li, C.S. Man, M.J. Shepard, T. Zhai, Enhancement of fatigue and corrosion properties of pure Ti by sandblasting, Mater. Sci. Eng. 429, 30 (2006). DOI: http://dx.doi.org/10.1016/j.msea.2006.04.024
• [20] Y. Tanaka, M. Fukumoto, Investigation of dominating factors on flattening behavior of plasma sprayed ceramic particles, Surf. Coat. Technol. 120, 124 (1999). DOI: https://doi.org/10.1361/105996306X146776
• [21] C. Coddet, G. Montavon, S. Ayrault-Costil, O. Freneaux, F. Rigolet, G. Barbezat, F. Folio, A. Diard, P. Wazen, Surface Preparation and Thermal Spray in a Single Step: The PROTAL Process - Example of Application for an Aluminum-Base Substrate, JTTEE5 8, 235-242 (1999). DOI: http://doi:10.1361/105996399770350467
• [22] A. Lamraoui, S. Costil, C. Langlade, C. Coddet, Laser surface texturing (LST) treatment before thermal spraying: A new process to improve the substrate-coating adherence, Surface & Coatings Technology 205, 164-167 (2010). DOI: http://dx.doi.org/10.1016/j.surfcoat.2010.07.044
• [23] Y.S. Ahmed, S.C. Veldhuis, Enhancement of carbide tool performance during dry machining through a combination of laser surface texturing and tungsten disulfide soft coatings, Surface & Coatings Technology 428, 127849 (2021). DOI: https://doi.org/10.1016/j.surfcoat.2021.127849
• [24] S. Tang, C. Wang, C. Hua, L. Yang, Y. Wu, X. Sun, P. Song, B. Huang, Surface texture of substrates prepared by femtosecond laser for improving the thermal cycle life of TBCs, Ceramics International 48, 5775-5786 (2022). DOI: https://doi.org/10.1016/j.ceramint.2021.11.125
• [25] L. Wang, Y. Di, H. Wang, Y. Zhao, S. Li, On crack evolution with texturization of bonding layer in thermal barrier coating, Journal of the European Ceramic Society 41, 6567-6577 (2021). DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.05.062
• [26] A. Ostadi, S.H. Hosseini, M.E. Fordoei, The effect of temperature and roughness of the substrate surface on the microstructure and adhesion strength of EB-PVD ZrO2-%8wtY2O3, Ceram. Int. 46, 2287-2293 (2020). DOI: http://dx.doi.org/10.1016/j.ceramint.2019.09.217
• [27] Z. Zhang, W. Lu, W. Feng, X. Du, D. Zuo, Effect of substrate surface texture on adhesion performance of diamond coating, International Journal of Refractory Metals and Hard Materials 95, 105402 (2021). DOI: http://dx.doi.org/10.1016/j.ijrmhm.2020.105402
• [28] Y. Meng, J. Deng, D. Ge, J. Wu, W. Sun, R. Wang, Surface textures fabricated by laser and ultrasonic rolling for improving tribological properties of TiAlSiN coatings, Tribology International 164, 107248 (2021). DOI: http://dx.doi.org/10.1016/j.triboint.2021.107248
• [29] Y. Ding, H. Li, Y. Tian, Bristle Blasting Surface Preparation in Thermal Spraying, J. Therm. Spray. Tech 28, 378-390 (2019). DOI: http://dx.doi.org/10.1007/s11666-019-00825-9
• [30] Longfei Liu, Shusen Wu, Yunbo Dong, Shulin Lü, Effects of alloyed Mn on oxidation behaviour of a Co-Ni-Cr-Fe alloy between 1050 and 1250°C, Corrosion Science 104, 236-247 (2016). DOI: http://dx.doi.org/10.1016/j.corsci.2015.12.016