PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Effects of Laser Surface Hardening on Microstructural Characteristics and Wear Resistance of AISI H11 Hot Work Tool Steel

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The present study deals with the effects of laser surface treatment on microstructure evolution and wear resistance of AISI H11 hot work tool steel in quenched and tempered condition. The most upper laser-affected zone is characterized by re-melted microstructure consisting of dendrite cells with fresh non-tempered martensite, retained austenite and inter-dendritic carbidic network. The subsolidus microstructure just beneath the re-melted zone represents the most laser surface hardened zone consisting of fresh non-tempered martensite with fine and coarse carbides as a result of overheating the original QT substrate microstructure. The highest microhardness values in the range from 775 to 857 HV were measured for the LSH microstructure and the most softened microstructure exhibited the minimum hardness of 530 HV. The laser treated samples showed the improvement of their surface wear resistance by 35%.
Twórcy
autor
  • Slovak Academy of Sciences, Institute of Materials Research, Košice, Slovak Republic
autor
  • Slovak Academy of Sciences, Institute of Materials Research, Košice, Slovak Republic
autor
  • Slovak Academy of Sciences, Institute of Materials Research, Košice, Slovak Republic
  • Slovak Academy of Sciences, Institute of Materials Research, Košice, Slovak Republic
autor
  • Technical University of Košice, Faculty of Metallurgy, Institute of Materials, Košice, Slovak Republic
autor
  • P. J. Šafárik University in Košice, Department of Condensed Matter Physics, Institute of Physics, Košice, Slovak Republic
Bibliografia
  • [1] S. D. Choi, S. H. Cheong, S. C. Yang, J. G. Kim, SKD11 surface heat treatment characteristics by high power diode laser, Proceeding of KSMTE 2007 Autumn Annual Meeting, 380-385 (2007).
  • [2] J. Lee, J. H. Jang., B. D. Joo, Y. M. Son, Y. H. Moon, Transactions of Nonferrous Metals Society of China 19, 917-920 (2009).
  • [3] A. Bokota, A. Kulawik, R. Szymczyk, J. Wróbel, Archives of Metallurgy and Materials 60, 2763-2772 (2015).
  • [4] Y. van Ingelgem, I. Vandendael, D. van den Broek, A. Hubin, J. Vereecken, Electrochimica Acta 52, 7796-7801 (2007).
  • [5] H. B. Lee, I. S. Jang, D. H. Jung, K. S. Kim, Surface hardening of hot forging die using diode laser, Proceeding of Korea Society of Laser Processing 2002 Autumn Annual Meeting, 45-49, 2002.
  • [6] J. Dutta Majumdar, A. K. Nath, I. Manna, Surface & Coatings Technology 204, 1326-1329 (2010).
  • [7] S. M. Shariff, T. K. Pal, G. Padmanabham, S. V. Joshi, Surface & Coatings Technology 228, 14-26 (2013).
  • [8] J. W. Wallace, D. Schwam, Die Casting Engineer, May/June, 50-58 (2000).
  • [9] R. Colaco, C. Pina, R. Vilar, Scripta Materialia 41, 715-721 (1999).
  • [10] K. A. Chiang, Y.-C. Chen, Material Letters 59, 1919-1923 (2005).
  • [11] H. J. Shin, Y. T Yoo, Journal of Materials Processing Technology 201, 342-347 (2008).
  • [12] G. Telasang, J. Dutta Majumdar, G. Padmanabham, I. Manna, Material Science Engineering A 599, 255-267 (2014).
  • [13] J. R. T. Branco, G. Krauss, Proceedings of the 6th International Congress on Heat Treatment of Metals, Chicago, 195-198, 1988.
  • [14] A. Medvedeva, J. Bergstrom, S. Gunnarsson, J. Andersson, Material Science Engineering A 523, 29-46 (2009).
  • [15] G. Telasang, J. Dutta Majumdar, G. Padmanabham, I. Manna, Surface & Coatings Technology 261, 69-78 (2015).
  • [16] Q. Gao, Y. Liu, X. Di, L. Yu, Z. Yan, J. Mater. Res. 27, 2779-2789 (2012).
  • [17] L. Falat, L. Čiripová, J. Kepič, J. Buršík, I. Podstranská, Engineering Failure Analysis 40, 141-152 (2014).
  • [18] S. Kasman, I. E. Saklakoglu, Kovove Mater. 51, 317-325 (2013).
  • [19] Ch. Yao, B. Xu, J. Huang, P. Zhang, Y. Wu, Optics and Lasers in Engineering 48, 20-26 (2009).
  • [20] A. Güral, Kovove Mater. 48, 25-31 (2010).
Uwagi
EN
This work was financially supported by the projects VEGA 2/0120/15, VEGA 2/0081/16, ITMS 26220220037, ITMS 26220220061 and ITMS 26220220064.
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-8cdfc2a4-6011-46c0-bb4f-6821e6754a1b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.