PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Analysis of Product Quality in the Process of Plastic Consolidation of Fragmented Fractions of the AK11 Alloy

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The aim of this publication is to present practical application of the R. Kolman’s quality rating method used in the evaluation of aluminium alloys. The results of studies of the mechanical and physical properties of the three selected test materials are discussed. To find the best material, the quality level of each of the tested materials was assessed using quality ratings proposed by R. Kolman. The results of the conducted analysis have proved that the best material was an AKII MM alloy, i.e. a casting AK11 aluminium alloy from the 4XXX series.
Twórcy
autor
  • AGH University of Science and Technology, Faculty of Non Ferrous Metals, Al. A. Mickiewicza 30, 30-059 Kraków, Poland
autor
  • Silesian Technical University, Organisation and Management Department, Zabrze, Polska
  • AGH University of Science and Technology, Faculty of Non Ferrous Metals, Al. A. Mickiewicza 30, 30-059 Kraków, Poland
autor
  • AGH University of Science and Technology, Faculty of Non Ferrous Metals, Al. A. Mickiewicza 30, 30-059 Kraków, Poland
autor
  • AGH University of Science and Technology, Faculty of Non Ferrous Metals, Al. A. Mickiewicza 30, 30-059 Kraków, Poland
autor
  • AGH University of Science and Technology, Department of Management, Al. A. Mickiewicza 30, 30-059 Kraków, Poland
Bibliografia
  • [1] S. Rahim, M Lajis, S Ariffin, A Review on recycling aluminium chips by hot extrusion proces, Procedia CIRP 26, 761-766, (2015).
  • [2] T. Wegrzyn, J. Piwnik, B. Łazarz, D. Hadrys, Main micro-jet cooling gases for steel welding, Archives of Metallurgy and Materials 58 (2), 555-557 (2013).
  • [3] P. Czech, Diagnosis of industrial gearboxes condition by vibration and time-frequency, scale-frequency, frequency-frequency analysis, Metalurgija 51 (4), 521-524 (2012).
  • [4] R. Burdzik, Z. Stanik, J. Warczek, Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Metallurgy and Materials 57 (2), 405-416 (2012).
  • [5] R. Burdzik, Z. Stanik, J. Warczek, Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Metallurgy and Materials 57 (2), 409-416 (2012).
  • [6] T. Węgrzyn, J. Piwnik, B. Łazarz, W. Tarasiuk, Mechanical properties of shaft surfacing with micro-jet cooling, Mechanika 21 (5), 419-423 (2015).
  • [7] B. Formanek, S. Jóźwiak, B. Szczucka-Lasota, A. Dolata-Grosz, Z. Bojar, Intermetallic alloys with ceramic particles and technological concept for high loaded materials, Journal of Materials Processing Technology 162/163, 858-855, (2005).
  • [8] A. Kurc-Lisiecka, W. Ozgowicz, W. Ratuszek, J. Kowalska, Analysis of Deformation Texture in AISI 304 Steel Sheets, Solid State Phenomena 203-204, 105-110, (2013), Doi 10.4028/www.scientific.net/SSP.203-204.105
  • [9] V. Gulley, A. Guzel, A. Jager, N. Ben Khalifa, A.E. Tekkaya, W. Z. Misiolek, Effect of die design on the welding quality during solid state recycling of AA6060 chips by hot extrusion, Material Science and Engineering 574, 163-175 (2013).
  • [10] A. E. Tekkaya, M. Schikkora, D. Becker, D. Biermann, N. Hammer, K. Pantkee, Hot profile extrusion of AA-6060 aluminum chips, Journal of Materials Processing Technology 209, 3343-3350 (2009).
  • [11] V. Zolotorevsky, N. Belov, M. Glazoff, Casting Aluminum Alloys, Elsevier Science (2007).
  • [12] E. V. D. Voet, L. V. Oers, R. Huele, Assessment of historical resource efficiency improvements in the aluminium industry, (2014), TNO report.
  • [13] P. R. Guru, F. Khan, S. K. Panigrahi, G. D. Janaki Ram, Enchancing strength, ductility and machinability of Al-Si cast alloy by friction stir processing, Journal of Manufacturing Processes 18, 66-74 (2015).
  • [14] Y. C. Lee, A. K. Dahle, D. H. StJohn, J. E. C. Hutt, The effect of grain refinement and silicon content on grain formation in hypoeutectic Al-Si alloys, Material Science and Engineering 259 (1), 43-52 (1999).
  • [15] S. P. Nikanorov, M. P. Volkov, V. N. Gurin, Yu. A. Burenkov, L. I. Derkachenko, B. K. Kardashev, L. L. Regel, W. R. Wilcox, Structural and mechanical properties of AlSi alloys obtained by fast cooling of a levitated melt, Materials Science and Engineering 390 (1-2), 63-69 (2005).
  • [16] L. Katgerman, F. Dom, Rapidly solidified aluminium alloys by meltspinning, Materials Science and Engineering 375-377, 1212-1216 (2004).
  • [17] C. G. Shivaprasad, S. Narendranath, V. Desai, S. Swami, M. S. Ganesha Prasad, Influence of Combined Grain Refinement and Modification on the Microstructure and Mechanical Properties of Al-12Si, Al-12Si-4.5Cu Alloys, Procedia Materials Science 5, 1369-1375 (2014).
  • [18] T. Tokarski, M. Wędrychowicz, M. Wiewiora, Light metals chips recycling by plasticconsolidation, Key Engineering Materials 641, 24-29, (2015).
  • [19] P. Noga, J. Wiewiora, L. Wzorek, The influence of extrusion ratio on the strength of hot extruded aluminium alloy chips, International conference on Metallurgy and Materials, June 3, Brno 2015, 1-6, 4024, Metal (2015).
  • [20] M. Wiewiora, M. Wedrychowicz, L. Wzorek, Mechanical properties of solid state recycled 6060 aluminum alloy chips, International conference on Metallurgy and Materials, June 3, Brno (2015), 1-6, 4076, Metal (2015).
  • [21] M. Samuel, New technique for recycling aluminium scrap, Journal of Materials processing technology 135 (1), 117-124 (2003).
  • [22] W. Chmura, J. Gronostajski, Mechanical and tribological properties of aluminiumbase composities produced by the recycling of chips, Journal of Materials Processing Technology 106, 23-27, (2000).
  • [23] J. Green, Aluminum Recycling and Processing for Energy Conservation and Sustainability, (2007) ASM International.
  • [24] H. Dybiec, Plastic consolidation of metallic powders, Archive of Metallurgy and Materials 52 (2), 161-170 (2007).
  • [25] M. Haase, N. Ben Khalifa, A. E. Tekkaya, W. Z. Misiołek, Improving mechanical properties of chip-based aluminum extrudates by integrated extrusion and equal channel angular pressing (iECAP), Materials Science and Engineering 539, 194-204, (2012).
  • [26] J. Cui, H. J. Roven, Recycling of automotive aluminium, Transactions of Nonferrous Metals Society of China 20, 2057-2063, (2010).
  • [27] L. Wzorek, Wpływ recyklingu z pominięciem fazy ciekłej na strukturę i własności wyciskanych stopów aluminium, (2015), doctor’s thesis.
  • [28] R. Chiba, T. Nakamura, M. Kuroda, Solid-state recycling of aluminium alloy swarf through cold profile extrusion and cold rolling, Journal of Materials Processing Technology 211 (11), 1878-1887, (2011).
  • [29] T. Skrzekut, A. Kula, L. Blaz, Effect of annealing temperature on the structure of mechanically alloyed Al-AgO composite, In METAL 2015: 24th International Conference on Metallurgy and Materials. Brno: TANGER, 2015, pp. 1639-1643.
  • [30] T. Skrzekut, A. Kula, L. Blaz, Structure evolution in annealed and hot deformed AlMg-CeO2 composite, Key Engineering Materials, 682, 259-264 (2016)
  • [31] PN-EN ISO 6892-1:2010 Metale-próba rozciągania – część 1: Metoda badania w temperaturze pokojowej.
  • [32] PN-EN ISO 6507-1:2007 Metale-pomiar twardości sposobem Vickersa – część 1: Metoda badań.
  • [33] PN-EN 1706:2011 Aluminium i stopy aluminium – odlew – skład chemiczny i własności mechaniczne.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-8c95fadf-5844-49f7-bb42-792a92c7a240
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.