PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Study of Solidification of Continuously Cast Steel Round Billets Using Numerical Modellin

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper is dedicated to the verification of solidification of continuously cast round steel billets using numerical modelling based on the finite element method. The aim of numerical modelling is to optimize the production of continuously cast steel billets of round format. The paper describes the pre-processing, processing and post-processing phases of numerical modelling. Also, the problems with determination of the thermodynamic properties of materials and the heat transfer between the individual parts of the casting system, including the definition of the heat losses along the casting strand in the primary and secondary cooling, were discussed. The first results of numerical simulation show the so-called thermal steady state of continuous casting. The temperature field, the metallurgical length and the thickness of the shell at the end of the mould were predicted. The further research will be concentrated on the prediction the risk of the cracks and the porosity based on the different boundary conditions.
Twórcy
  • VŠB-Technical University of Ostrava , Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry , and Regional Materials Science and Technology Centre
autor
  • Arcelormittal Ostrava a.s., Ostrava, Czech Republic
autor
  • ŠB-Technical University of Ostrava , Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry , and Regional Materials Science and Technology Centre
autor
  • Politechnika Śląska, Instytut Technologii Metali, Katowice, Poland
autor
  • Politechnika Śląska, Instytut Technologii Metali, Katowice, Poland
autor
  • Politechnika Śląska, Instytut Technologii Metali, Katowice, Poland
autor
  • VŠB-Technical University of Ostrava , Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry , and Regional Materials Science and Technology Centre
autor
Bibliografia
  • [1] G. Straffelini, L. Lutterotti, M. Tonolli, M. Ilestni, ISIJ Int. 51, 1448-1453 (2011).
  • [2] http://fluid.ippt.gov.pl/sarler/AMAS_MOD_CC_STEEL.pdf
  • [3] C. Assuncao, R. Tavares, G. Oliveira, Ironmak. Steelmak. 42, 1-8 (2015).
  • [4] K. Michalek, L. Camek, K. G ryc, T. Huczala, V. Troszok, Mater. Tehnol. 47, 135-140 (2013).
  • [5] T. Merder, J. Pieprzyca, Steel Res. Int. 83, 11, 1029-1038 (2012).
  • [6] L. Klimes, J. Stetina, L. Parilak, P. Bucek, Engineering MECHANICS, 20, 237-246 (2013).
  • [7] A. G hosh, A. Chatterjee, Ironmaking and Steelmaking: Theory and Practice. PHI Learning Private Limited, 2008. 472 p. ISBN -978-81-203-3289-8.
  • [8] D. Mazumdaret. al. Modeling of steelmaking processes. CRP Press, 2010. 463, ISBN 978-1-4200-6243-4.
  • [9] M. G onzalez, M. B. G oldschmit, A. P. Assanelli, E. F ernández Berdaguer, E. N. Dvorkin, Metall. Mater. Trans. B 34B, 455-473 (2003).
  • [10] P. Du, Numerical modeling of porosity and macrosegregation in continuous casting of steel. PhD thesis, University of Iowa, 2013. http://ir.uiowa.edu/etd/2482.
  • [11] P. Sismani, http://cdn.intechopen.com/pdfs-wm/20815.pdf
  • [12] S. Koric, L. C. Hibbeler, B. G . T homas, Modeling of Casting, Welding and Advanced Solidification Processes XII, Vancouver, Canada, June 7-14, 2009 Edited by S. Cockroft et al. TMS (The Minerals, Metals & Materials Society)
  • [13] M. Maldovan, J. Príncipe, G . Sánchez, A. Pignotti, M. G oldschmit, Barcelona, 11-14 (2000), ECCOMAS.
  • [14] M. Velicka, D. Dittel, R. Pyszko, M. Prihoda, M. Vaculik, P. F otik, J. Burda, Mater. and Technol. 47 815-818 (2013).
  • [15] M. Yao, H. Yin, J. C. W ang, D. C. F ang, X. Liu, Y. Yu, J. J. Liu, Ironmak. and Steelmak., 32, 359-368 (2005).
  • [16] L. G uo, X. W ang, H. Zhan, M. Yao, D. F ang, ISIJ Int. 47, 1108-1116 (2007).
  • [17] A. Maurya, P. K. Jha, Int. J. Mech. Eng. & Rob. Res. Special Issue 1, 13-21 (2014).
  • [18] B. Hadala, A. Cebo-Rudnicka, Z. Malinowski, A. Goldasz, Arch. Metall. Mater. 56, 367-377 (2011).
  • [19] L. Klimeš, Optimization of secondary cooling parameters of continuous steel casting. PhD Thesis, Brno University of Technology 2014.
  • [20] D. M. Stefanescu, Science and Engineering of Casting Solidification. New York: Springer, 2009.
  • [21] M. Vynnycky, J Eng Math 68, 129-152 (2010).
  • [22] Z. Böhm, J. Cagaš, Z. Dolejší, J. Kučera, J. Pětroš, L. Šmrha. Plynulé odlévání oceli, SNTL Prag 1992.
  • [23] M. Velička, M. Příhoda, J. Molínek, M. Adamik, Hutnické listy, 3, 73-77 (2008).
  • [24] M. Velička, M. Příhoda, J. Molínek, M. Adamik, Hutnické listy, 3, 73-77 (2008).
  • [25] K. Gryc, B. Smetana, M. Strouhalova, M. Zaludova, K. Michalek, S. Zla, L. Valek, A. Kalup, J. Dobrovska, METAL 2014, 57-63, Tanger Ltd, ISBN:978-80-87294-54-3.
  • [26] B. Smetana, M. Zaludova, S. Zla, V. Matejka, J. Dobrovska, K. Gryc, M. Tkadleckova, V. Sikora, P. Kozelsky, M. Cagala, METAL 2011, 486-491, Tanger Ltd., ISBN:978-80-87294-24-6.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-8c343b5a-dffe-48e6-bf33-dc0091c45872
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.