Numerical Analysis of an Aluminium Profile under Bending using Abaqus And Deform-3D

• Autorzy: Różyło P. , Wójcik Ł. , Wrzesińska K.
• Języki publikacji: EN

Abstrakty

EN

The paper describes the process of symmetric bending of an aluminium specimen using two independent environments for numerical analysis. A FEM analysis is performed on an aluminium channel section. A comparison is made between the bending process performed in the Abaqus environment and that run with the Deform-3D system. In both numerical analysis systems, the crucial point is to determine the state of reduced stresses for a designed computer model. The paper provides a visual comparison of the profiles subjected to bending; it also determines displacements and stresses in the tested structures. To perform a nonlinear static analysis, we define a material model, determine boundary conditions, interactions as well as generate a mesh. The results produced with the two numerical systems agree to a very high extent.

Słowa kluczowe

EN

Abaqus; deform 3D; numerical analysis; stress

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Lublin University of Technology
• Czasopismo: Applied Computer Science
• Rocznik: 2016
• Tom: Vol. 12, no 1
• Strony: 40--47
• Opis fizyczny: Bibliogr. 12 poz., fig., tab.

Twórcy

autor

Różyło P.

• Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin

autor

Wójcik Ł.

• Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin

autor

Wrzesińska K.

• Maria Curie-Skłodowska University, Akademicka 19, 20-033 Lublin

Bibliografia

• [1] Chiba R., Yoshimura M.: Solid-state recycling of aluminium alloy swarf into c-channel by hot extrusion, Journal of Manufacturing Processes, 17, 2015, p. 1–8.
• [2] Choi Y., Yeo H.T., Park J.H., Oh G.H., Park S.W.: A study on press forming of automotive sub-frame parts using extruded aluminum profile, Journal of Materials Processing Technology, 2007, p. 85–88.
• [3] Debski H., Jonak J.: Failure analysis of thin-walled composite channel section columns, Composite Structures, 132, 2015, p. 567–574.
• [4] Debski H., Kubiak T., Teter A.: Experimental investigation of channel-section composite profiles behavior with various sequences of plies subjected to static compression, Thin-Walled Structures, 71, 2013, p. 147–154.
• [5] Kubiak T., Kaczmarek L.: Estimation of load-carrying capacity for thin-walled composite beams, Composite Structures, 119, 2015, p. 749–756.
• [6] Kubiak T., Samborski S., Teter A.: Experimental investigation of failure process in compressed channel-section GFRP laminate columns assisted with the acoustic emission method, Composite Structures, 133, 2015, p. 921–929.
• [7] Mania R. J., Kolakowski Z., Bienias J., Jakubczak P., Majerski K.: Comparative study of FML profiles buckling and post buckling behavior under axial loading, Composite Structures, 134, 2015, p. 216–225.
• [8] Paszkiewicz M., Kubiak T.: Selected problems concerning determination of the buckling load of channel section beams and columns, Thin-Walled Structures, 93, 2015, p. 112–121.
• [9] Różyło P.: Optimization of I-section profile design by the finite element method, Advances in Science and Technology Research Journal, 10(29), 2016, p.52–56.
• [10] Wang D., Xu K., Jiang Z., Li R., Zhang X., Zhang Y., Qin S.: Research on the cracking of the thick steel plate in the bending process, IEEE, 2014, p. 5020–5023.
• [11] Zhang L. H., Zhang Z. C., Li S. Y., Cui H., Cui H. X.: FE simulation and bending speed optimization of N-TR continuous grain flow forging process for solid heavy crankshaft, Obróbka Plastyczna Metali, 2006, p. 3–13.
• [12] Abaqus HTML Documentation.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę