Influence of selected admixtures on the microstructure of renovation plaster mortars

• Autorzy: Brachaczek W.

Identyfikatory

DOI

10.21307/ACEE-2018-040

• Języki publikacji: EN

Abstrakty

EN

In the environment in which the renovation plaster mortars are exposed to moisture, followed by the crystallization of salt, their required durability is obtained by aeration. Aeration increases the porosity and resistance to salt crystallization, significantly changing the properties of plaster mortars. The paper presents the results of research on the influence of aeration and hydrophobizing admixtures on the porosity and pore size distribution in renovation plaster mortars. It was found that when aeration admixtures are used together with hydrophobizing admixtures, there may be problems with maintaining the proper degree of aeration of the mixture.

Słowa kluczowe

EN

microstructure of the renovation plaster mortars; mortar admixture; porosity; renovation plaster mortar

PL

mikrostruktura renowacyjnych zapraw tynkarskich; domieszka do zaprawy; porowatość; renowacyjna zaprawa tynkarska

• Wydawca: Silesian University of Technology
• Czasopismo: Architecture Civil Engineering Environment
• Rocznik: 2018
• Tom: Vol. 11, no. 3
• Strony: 79--85
• Opis fizyczny: Bibliogr. 20 poz.

Twórcy

autor

Brachaczek W.

• Faculty of Civil Engineering, The University of Bielsko-Biała, ul. Willowa 2, 43-309 Bielsko-Biala, Poland

Bibliografia

• [1] Lubelli, B., van Hees, R.P.J., Groot, C.W.P. (2006). Investigation on the behaviour of a restoration plaster applied on heavy salt loaded masonry, Construction and Building Materials 20(9), 691-699.
• [2] Rodriguez-Navarro, C., Doehne, E. (1999). Salt weathering: influence of evaporation rate, supersaturation and crystallization pattern, Earth Surface Processes and Landforms 24(3), 191-209.
• [3] Pavlikova, M., Pavlik Z., Keppert, M., Cerny, R. (2011). Salt transport and storage parameters of renovation plasters and their possible effects on restored buildings’ walls, Construction and Building Materials 25(3), 1205-1212.
• [4] Lubelli, B., van Hees, R.P.J., Groot, C.W.P. (2006). Sodium chloride: crystallization in a “salt transporting” restoration plaster, Cement and Concrete Research 36(8), 1467-1474.
• [5] Lubelli, B., de Rooij, M.R. (2009). NaCl crystallization in restoration plasters, Construction and Building Materials 23(5), 1736-1742.
• [6] Marynowicz, A., Wyrwał, J. (2005). Badanie właściwości wilgotnościowych wybranych materiałów budowlanych w warunkach izotermicznych (The study of humid properties of selected building materials in isothermal conditions), Instytut Naukowo-Badawczy ZTUREK.
• [7] Ramachandran, V.S. (1995). Concrete Admixtures Handbook 2nd Edition. Properties, Science and Technolog., Park Ridge, USA.
• [8] Du, L.X., Folliard, K.J. (2005) Mechanisms of air entrainment in concrete, Cement and Concrete Research 35(8), 1463-1471.
• [9] Arkles, B. (2011). Hydrophobicity and Hydrophilicity and Silane Surface Modification, GelestInc, Morrisville.
• [10] Sakai, E., Kasuga, T., Sugiyama, T., Asaga, K., Daimon, M. (2006). Influence of superplasticizers on the hydration of cement and the pore structure of hardened cement, Cement and Concrete Research 36(11), 2049-2053.
• [11] Gołaszewski, J., Szwabowski, J. (2004). Korygowanie wpływu domieszek napowietrzających na urabialność i wytrzymałość na ściskanie betonów wysokowartościowych (The adjustment of the impact of aeration admixtures on workability and durability against the compression strength of high-perfomance concrete). Konferencja Dni Betonu. Tradycja i Nowoczesność. Wisła, 16.
• [12] Łaźniewska-Piekarczyk, B., Szwabowski, J. (2014). Kompatybilność między domieszką napowietrzającą i upłynniającą uprzedniona powietrzonych mieszanek betonowych (The compatibility between aeration admixture and liquid admixture based on the concrete aeration admixtures ). Materiały budowlane, 11,18-20.
• [13] PN-EN 1015-11:2001/A1:2007: Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strentgth of hardened mortar.
• [14] WTA Merkblatt 2-9-04, „Sanierputzsysteme”.
• [15] Angeli,M., Bigas, J.P., Benavente, D.,Menendez, B., Hebert, R., David, C. (2007). Salt crystallization in pores: quantification and estimation of damage, Environmental Geology 52(2), 187-195.
• [16] Angeli, M., Benavente, D., Bigas, J.P., Menendez, B., Hebert, R., David, C. (2008). Modification of the porous network by salt crystallization in experimentally weathered sedimentary stones, Materials and Structures 41(6), 1091-1108.
• [17] Flatt, R.J. (2002). Salt damage in porous materials: how high supersaturations are generated, Journal of Crystal Growth 242(3-4) 435-454.
• [18] Ignerowicz, A., Oleksik, M. (2017). Kompatybilność środków odpieniających z domieszkami PCE (The compatibility of defoaming substances and PCE admixtures). Nowoczesne Budownictwo Inżyneryjne, 2(71), 52-54.
• [19] Abdolahi, F., Moosavian, M. A., Ali, V. (2005). The Mechanism Action Antifoams, 5, 1122-1129.
• [20] PN-EN 1015-18:2003: Methods of test mortar for masonry-Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar.