A low cost EMC pre-compliance board for electronic devices and smart grids networks

• Autorzy: Araujo H. X. , Melo M. D. B. , Casella I. R. S. , Capovilla C. E.

Identyfikatory

DOI

10.15199/48.2017.03.62

Warianty tytułu

PL

Prosty układ dopasowujący EMC do urządzęń telekomunikacyjnych I sieci smart grid

• Języki publikacji: EN

Abstrakty

EN

In this work, a low cost EMC – Electromagnetic Compatibility pre-compliance board, based on the conducted emission technique, is proposed as an option to analyze electronic devices used in telecommunications and smart grid network enviroments. In general, as the IC is the major responsible of unintentional emissions and coupling, some specific pre-compliance setup tests are employed to analyze these detrimental effects to the system as a whole. Therefore, an EMC Pre-Compliance Board was designed and built to operate from 150 KHz to 30 MHz. Simulated and experimental results are compared to validate the test setup.

PL

W pracy przedstawiono prosty układ umożliwiający testowanie i poprawę elektrokompatybilności urządzeń telekomunikacyjnych I wyposażenia sieci smart grid. Układ pracuje w zakresie częstotliwości 150 kHz – 30 MHz.

Słowa kluczowe

EN

EMC; EMI; conducted emission; telecommunications system; smart grid

PL

elektrokompatybilność; sieci smart grid; urządzenie telekomunikacyjne

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2017
• Tom: R. 93, nr 3
• Strony: 284--286
• Opis fizyczny: Bibliogr. 8 poz., rys., wykr.

Twórcy

autor

Araujo H. X.

• Universidade Federal Tocantins, Av: NS 15 ALC NO 14, 109 Norte - 77001-090, Palmas - TO, Brazil

autor

Melo M. D. B.

• Universidade Federal Tocantins, Av: NS 15 ALC NO 14, 109 Norte - 77001-090, Palmas - TO, Brazil

autor

Casella I. R. S.

• Universidade Federal do ABC, Rua Santa Adélia, 166 - 09.210-170, Santo André -SP, Brazil

autor

Capovilla C. E.

• Universidade Federal do ABC, Rua Santa Adélia, 166 - 09.210-170, Santo André -SP, Brazil

Bibliografia

• [1] A. Gunnar, K. Dursun, B. G. Hauge and B. Bremdal, Establishing Sustainable and Reliable Smart Grids, Applied Measurements for Power Systems (AMPS), 2013 IEEE International Workshop on., Aachen, Germany, 2013.
• [2] Montrose, M. I., E. M. Nakauchi, Testing for EMC Compliance, New York, 2004.
• [3] F. R. L. Silva, L. R. Ribeiro, L. P. Dias, W. J. Santos, C. E. Capovilla, and H. X. Araujo, The Design and Implementation of an EMC Pre-Compliance Board, Progress In Electromagnetics Research Symposium Proceedings, Stockholm, Sweden, 2013.
• [4] CISPR14-1 ed 5.1, Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission. International Electrotechnical Commission, 2009.
• [5] CISPR22 ed 6.0, Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement. International Electrotechnical Commission, 2008.
• [6] V. C. Gungor, D. Sahin, T. Kocak, S. Ergut, C. Buccella, C. Cecati, and G. P. Hancke “A Survey on Smart Grid Potential Applications and Communication Requirements” IEEE Transactions on Industrial Informatics, vol. 9, n. 1, Feb. 2013.
• [7] Y. Yan, Y. Qian, H. Sharif, and D. Tipper, “A survey on smart grid communication infrastructures: Motivations, requirements and challenges,” IEEE Commun. Surveys & Tutorials, vol. PP, no. 99, pp. 1–16.
• [8] Z. X. Ji Chen and Z. Chen, "Low Frequency Modeling forElectromagnetic Analysis of a Arbitrary Anechoic Chambers", IEEE International Symposium on Electromagnetic Compatibility, 2016.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).