Effect of Nb and Zr alloying additives on structure and properties of Ti-Ta-Nb-Zr alloys for medical applications

• Autorzy: Dercz Grzegorz , Matuła Izabela , Prusik Krystian , Zając J. , Szklarska Magdalena , Kazek-Kęsik Alicja , Simka Wojciech

Identyfikatory

DOI

10.24425/amm.2023.145485

• Języki publikacji: EN

Abstrakty

EN

This work investigated two titanium-based alloys with a constant tantalum content and variable contents of alloy additives - niobium and zirconium. The Ti-30Ta-10Zr-20Nb (wt.%) and Ti-30Ta-20Zr-10Nb (wt.%) alloys were obtained using a combination of powder metallurgy and arc melting methods. The influence of alloying additives on the structure and properties of the Ti-Ta-Nb-Zr system was studied using, among others: X-ray diffraction and scanning electron microscopy. The X-ray diffraction confirmed the single-β-phase structure of both alloys. In addition, the microscopic analysis revealed that a higher amount of zirconium favoured the formation of larger grains. However, the microhardness analysis indicated that the alloy with the higher niobium content had the higher microhardness. Importantly, the in vitro corrosion study revealed that the addition of niobium promoted the better corrosion resistance of the investigated alloy.

Słowa kluczowe

EN

titanium-based alloys; corrosion resistance; biomaterials; arc-melting; structure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 3
• Strony: 1137--1142
• Opis fizyczny: Bibliogr. 25 poz., fot., rys., tab., wykr.

Twórcy

autor

Dercz Grzegorz

• Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty Street 1 A, 41-500 Chorzów, Poland

• https://orcid.org/0000-0003-3682-7184

autor

Matuła Izabela

• Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty Street 1 A, 41-500 Chorzów, Poland

• https://orcid.org/0000-0001-8013-7776

autor

Prusik Krystian

• Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty Street 1 A, 41-500 Chorzów, Poland

• https://orcid.org/0000-0002-0538-0749

autor

Zając J.

• Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty Street 1 A, 41-500 Chorzów, Poland

autor

Szklarska Magdalena

• Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty Street 1 A, 41-500 Chorzów, Poland

• https://orcid.org/0000-0001-8716-630X

autor

Kazek-Kęsik Alicja

• Faculty of Chemistry, Silesian University of Technology, B. Krzywoustego Street 6, 44-100 Gliwice, Poland

• https://orcid.org/0000-0001-9971-7279

autor

Simka Wojciech

• Faculty of Chemistry, Silesian University of Technology, B. Krzywoustego Street 6, 44-100 Gliwice, Poland

• https://orcid.org/0000-0002-2648-5523

Bibliografia

• [1] M. Geetha, A. K. Singh, R. Asokamani, A. K. Gogia, Ti based biomaterials, the ultimate choice for orthopaedic implants - A review, Prog. Mater. Sci. 54 (3), 397-425 (2009). DOI: https://doi.org/10.1016/j.pmatsci.2008.06.004
• [2] K. Wang, The use of titanium for medical applications in the USA, Mater. Sci. Eng. A, 213 (1-2), 134-137 (1996). DOI: https://doi.org/10.1016/0921-5093(96)10243-4.
• [3] Y. Li, C. Yang, H. Zhao, S. Qu, X. Li, Y. Li, New developments of Ti-based alloys for biomedical applications. Materials 7 (3), 1709-1800 (2014). DOI: https://doi.org/10.3390/ma7031709
• [4] M. Szklarska, G. Dercz, J. Rak, W. Simka, B. Losiewicz, The influence of passivation type on corrosion resistance of Ti15Mo alloy in simulated body fluids, Arch. Metall. Mater. 60 (4), 2687-2693 (2015). DOI: https://doi.org/10.1515/amm-2015-0433
• [5] M. Szklarska, G. Dercz, W. Simka, B. Łosiewicz, A.C. impedance study on the interfacial properties of passivated Ti13Zr13Nb alloy in physiological saline solution, Surf. Interface Anal. 46 (10-11), 698-701 (2014). DOI: https://doi.org/10.1002/sia.5383
• [6] W. Simka, A. Krzakala, A.M. Korotin, I.S. Zhidkov, E.Z. Kurmaev, S.O. Cholakh, K. Kuna, G. Dercz, J. Michalska, K. Suchanek, T. Gorewoda, Modification of a Ti-Mo alloy surface via plasma electrolytic oxidation in a solution containing calcium and phosphorus, Electrochim. Acta 96, 180-190 (2013). DOI: https://doi.org/10.1016/j.electacta.2013.02.102
• [7] I. Matuła, G. Dercz, M. Zubko, J. Maszybrocka, J. Jurek-Suliga, S. Golba, I. Jędzrzejewska, Microstructure and porosity evolution of the Ti-35Zr biomedical alloy produced by elemental powder metallurgy, Materials 13 (20), 4539 (2020). DOI: https://doi.org/10.3390/ma13204539
• [8] J. Willis, S. Li, S.J. Crean, F.N. Barrak, Is titanium alloy Ti-6Al-4 V cytotoxic to gingival fibroblasts - A systematic review, Clin. Exp. Dent. Res. 7 (6), 1037-1044 (2021). DOI: https://doi.org/10.1002/cre2.444
• [9] K.J. Bozic, S.M. Kurtz, E. Lau, K. Ong, D.T.P. Vail, D.J. Berry, The epidemiology of revision total hip arthroplasty in the United States, J. Bone Joint Surg. Am. 91 (1), 128-133 (2009). DOI: https://doi.org/10.2106/JBJS.H.00155
• [10] S. Rao, T. Ushida, T. Tateishi, Y. Okazaki, S. Asao, Effect of Ti, Al, and V ions on the relative growth rate of fibroblasts (L929) and osteoblasts (MC3T3-E1) cells, Biomed. Mater. Eng. 6 (2), 79-86 (1996). DOI: https://doi.org/10.3233/BME-1996-6202
• [11] K.S. Cameron, V. Buchner, P.B. Tchounwou, Exploring the molecular mechanisms of nickel-induced genotoxicity and carcinogenicity: A literature review, Rev. Environ. Health 26 (2), 81-92 (2011). DOI: https://doi.org/10.1515/REVEH.2011.012
• [12] E. Denkhaus, K. Salnikow, Nickel essentiality, toxicity, and carcinogenicity, Crit. Rev. Oncol. 42 (1), 35-56 (2002). DOI: https://doi.org/10.1016/S1040-8428(01)00214-1
• [13] S. Buxton, E. German, K.E. Heim, T. Lyons-Darden, C.E. Schlekat, M.D. Taylor, A.R. Oller, Concise review of nickel human health toxicology and ecotoxicology, Inorganics 7 (7), 89 (2019). DOI: https://doi.org/10.3390/inorganics7070089
• [14] H.J. Rack, J.I. Qazi, Titanium alloys for biomedical applications, Mater. Sci. Eng. C 26 (8), 1269-1277 (2006). DOI: https://doi.org/10.1016/j.msec.2005.08.032.
• [15] A.M. Khorasani, M. Goldberg, E.H. Doeven, G. Littlefair, Titanium in biomedical applications - properties and fabrication: A review, J. Biomater Tissue Eng. 5 (8), 593-619 (2015). DOI: https://doi.org/10.1166/jbt.2015.1361
• [16] G. Dercz, I. Matuła, M. Zubko, J. Dercz, Phase composition and microstructure of new Ti-Ta-Nb-Zr biomedical alloys prepared by mechanical alloying method, Powder Diffr. 32 (S1), S186-S192 (2017). DOI: https://doi.org/10.1017/S0885715617000045
• [17] A.I. Karayan, S.W. Park, K.M. Lee, Corrosion behavior of TiTa-Nb alloys in simulated physiological media, Mater. Lett. 62 (12-13), 1843-1845 (2008). DOI: https://doi.org/10.1016/j.matlet.2007.10.028
• [18] M.K. Han, J.Y. Kim, M.J. Hwang, H.J. Song, Y.J. Park, Effect of Nb on the microstructure, mechanical properties, corrosion behavior, and cytotoxicity of Ti-Nb alloys, Materials 8 (9), 5986-6003 (2015). DOI: https://doi.org/10.3390/ma8095287
• [19] Y. Guo, K. Georgarakis, Y. Yokoyama, A.R. Yavari, On the mechanical properties of TiNb based alloys, J. Alloys Compd. 571, 25-30 (2013). DOI: https://doi.org/10.1016/j.jallcom.2013.03.192
• [20] T. Tian, B. Dang, F. Li, K. Yang, D. Wei, P. Zhang, Microstructure, mechanical and antibacterial properties of TiNb-based alloy implanted by silver ions, Coatings 11 (10), (2021). DOI: https://doi.org/10.3390/coatings11101213
• [21] A. Biesiekierski, J. Wang, M. Abdel-Hady Gepreel, C. Wen, A new look at biomedical Ti-based shape memory alloys, Acta Biomater. 8 (5), 1661-1669 (2012). DOI: https://doi.org/10.1016/j.actbio.2012.01.018
• [22] E. Delvat, D.M. Gordin, T. Gloriant, J.L. Duval, M.D. Nagel, Microstructure, mechanical properties and cytocompatibility of stable beta Ti-Mo-Ta sintered alloys, J. Mech. Behav. Biomed. Mater. 1 (4), 345-351 (2008). DOI: https://doi.org/10.1016/j.jmbbm.2008.01.006
• [23] X. H. Zheng, J.H. Siu, X. Zhang, Z.Y. Yang, H.B. Wang, X.H. Tian, W. Cai, Thermal stability and high-temperature shape memory effect of Ti-Ta-Zr alloy, Scr. Mater. 68 (12), 1008-1011 (2013). DOI: https://doi.org/10.1016/j.scriptamat.2013.03.008
• [24] M. Takahashi, M. Kikuchi, O. Okuno, Grindability of Dental Cast Ti-Zr Alloys, Mat. Trans. 50 (4), 859-863 (2009). DOI: https://doi.org/10.2320/matertrans.MRA2008403
• [25] A.V. Dobromyslov, G.V. Dolgikh, Y. Dutkevich, T.L. Trenogina, Phase and structural transformations in Ti-Ta alloys, Phys. Met. Metallogr. 107 (5), 502-510 (2009). DOI: https://doi.org/10.1134/S0031918X09050111