Experimental Investigations of Tool Wear in Vibration-Assisted Turning of Inconel 718

• Autorzy: Dodla Srihari

Identyfikatory

DOI

10.24425/amm.2022.139687

• Języki publikacji: EN

Abstrakty

EN

In the current paper, the effect of tool wear for a constant period of time (360 s) during conventional and ultrasonic assisted machining of Inconel 718 is investigated in terms of cutting forces, temperature, and deviation measurements. For fixed process parameters turning experiments have been performed with and without the application of tangential vibration. Ultrasonic assisted turning (UAT) experiments have been compared with conventional turning (CT). The experimental results reveal that cutting forces and temperature increase linearly in the case of UAT whereas remaining constant in CT for a constant period of time. Besides the tool wear rate in the case of UAT is more than that in the CT.

Słowa kluczowe

EN

Inconel 718; ultrasonic assisted turning; dry machining; deviation; cutting forces; temperature

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 3
• Strony: 949--953
• Opis fizyczny: Bibliogr. 18 poz., fot., rys.

Twórcy

autor

Dodla Srihari

• Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi-221005, India

• https://orcid.org/0000-0002-9512-9725

Bibliografia

• [1] A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, A.K. Koul, Mater. & Design 52, 791-800 (2013).
• [2] A. Thomas, M. El-Wahabi, J.M. Cabrera, J.M. Prado, Jour. of Mater. Processing Technology 177, 469-472 (2006).
• [3] T. Antonsson, H. Fredriksson, Metallurg. and Mater. Trans. B 36, 85-96 (2005).
• [4] D. McAllister, D. Lv, B. Peterson, H. Deutchman, Y. Wang, M.J. Mills, Scripta Materialia 115, 108-112 (2016).
• [5] Zhenyuan Jia, Xiaohong Lu, Han Gu, Feixiang Ruan, Steven Y. Liang, Journal of Materials Processing Technology 291, 117003 (2021).
• [6] H. Qi, M. Azer, A. Ritter, Metallurgical and Materials Transactions A 40 (10), 2410-2422 (2009).
• [7] E. Hosseini, V.A. Popovinch, Additive Manufacturing 30, 100877 (2019).
• [8] X. He, H. Shi, Y. Zhang, J. Gu, C. Li, K. Kadau, O. Luesebrink, Materials Science and Engineering, A 618, 153-160 (2014).
• [9] S. Dodla, Materials Today: Proceedings (2020). DOI: https://doi.org/10.1016/j.matpr.2020.03.137 (in press).
• [10] S. Dodla, A. Roy, V.V. Silberschmidt, Characterization of aerospace alloys: Effect of machining, in: BSSM 11th International Conference on Advances in Experimental Mechanics 2016.
• [11] A. Cruzado, B. Gan, M. Jim ́enez, D. Barba, K. Ostolaza, A. Linaza, J.M. Molina-Aldareguia, J. Llorca, J. Segurado, Acta Materialia 98, 242-253 (2015).
• [12] A. Devillez, G. Le Coz, S. Dominiak, D. Dudzinski, Journ. of Mater. Process. Techn. 211 (10), 1590-1598 (2011).
• [13] A. Maurotto, A. Roy, V.I. Babitsky, V.V. Silberschmidt. Solid State Phenomena 188, 330-338. (2012).
• [14] C. Nath, M. Rahman, S.S.K. Andrew. Journ. of Mater. Process. Techn. 192-193, 159-165 (2007).
• [15] S. Dodla, P. Thiem, M. Kruger, D. Dietrich, A. Bertram. Journ. of Alloys and Comp. 647, 519-527 (2015).
• [16] A.V. Mitrofanov, V.I. Babitsky, V.V. Silberschmidt. Journ. of Mater. Process. Techn. 153-154, 233-239 (2004).
• [17] Q. Wang, Y. Wu, J. Gu, D. Lu, Y. Ji, M. Nomura. Procedia CIRP. 42, 858-862 (2016).
• [18] M.E.R. Bonifacio, A.E. Diniz. Wear. 173, 137-144 (1994)

Uwagi

1. The financial support provided by the EPSRC (UK) and the Department of Science and Technology (India) is gratefully acknowledged.

2. Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).