Diacryloyl Derivative of Mannitol - Synthesis and Application in Gelcasting of Al2O3-ZrO2 Composites

• Autorzy: Wiecinska P. , Kubica D. , Pietrzak E. , Sakowicz A. , Prokurat N. , Antosik A.

Identyfikatory

DOI

10.24425/122415

• Języki publikacji: EN

Abstrakty

EN

The aim of research was the elaboration of the synthesis of new organic monomer applicable in gelcasting. The substance named 3,4-di-acryloyl-D-mannitol which contains two acryloyl groups and four hydroxyl groups in its molecule has been synthesized. The monomer has been then applied in the preparation of Al₂O₃-ZrO₂ composites by gelcasting and subsequent sintering. Rheological properties of ceramic suspensions have been examined, as well as the properties of green and sintered bodies. SEM observations allowed to determine the distribution of zirconia grains in alumina matrix. Density, Vickers hardness and fracture toughness of ZTA composites have been measured. The new monomer, that is diacryloyl derivative of mannitol, is less sensitive to the oxygen inhibition than commonly used in gelcasting and commercially available 2-hydroxyethyl acrylate.

Słowa kluczowe

EN

gelcasting; ZTA; composites; zirconia; mannitol

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 2
• Strony: 859--865
• Opis fizyczny: Bibliogr. 35 poz., fot., rys., tab., wykr.

Twórcy

autor

Wiecinska P.

• Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland

autor

Kubica D.

• COBRO - Packaging Research Institute, Warsaw, Poland

autor

Pietrzak E.

• Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland

autor

Sakowicz A.

• Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland

autor

Prokurat N.

• Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland

autor

Antosik A.

• Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland

Bibliografia

• [1] A. Heel, P. Holtappels, T. Graule, On the synthesis and performance of flame-made nanoscale La0.6Sr0.4CoO3-δ and influence on the application as an intermediate temperature solid oxide fuel cell cathode, J. Power Sources. 195, 6709-6718 (2010).
• [2] B. J. Adamczyk, T. Jüstel, J. Plewa, M. Sopicka-Lizer, D. Michalik, The influence of Na2CO3 flux on photoluminescence properties of SrSi2O2N2:Eu2+ phosphor, Ceram. Int. 43 (15), 12381-12387 (2017).
• [3] L. Chlubny, J. Lis, K. Chabior, P. Chachlowska, C. Kapusta, Processing and properties of MAX phases - based materials using SHS technique, Arch. Metall. Mater. 60 (2), 859-863 (2015).
• [4] C. Tallon, M. Limacher, G. V. Franks, Effect of particle size on the shaping of ceramics by slip casting, J. Eur. Ceram. Soc. 30, 2819-2826 (2010).
• [5] S. M. Olhero, G. Tari, M. A. Coimbra, J. M. F. Ferreira, Synergy of polysaccharide mixtures in gelcasting of alumina, J. Eur. Ceram. Soc. 20, 423-429 (2000).
• [6] D. K. Bora, A. Braun, S. Erat, O. Safonova, T. Graule, E. C. Constable, Evolution of structural properties of iron oxide nano particles during temperature treatment from 250°C-900°C: X-ray diffraction and Fe K-shell pre-edge X-ray absorption study, Curr. Appl. Phys. 12, 817-825 (2012).
• [7] D. Kenfaui, D. Chateigner, M. Gomina, J. G. Noudem, Anisotropy of the mechanical and thermoelectric properties of hot-pressed single-layer and multi-layer thick Ca3Co4O9 ceramics, Int. J. Appl. Ceram. Technol. 1 (8), 214-226 (2011).
• [8] P. Wiecinski, J. Smolik, H. Garbacz, J. Bonarski, A. Mazurkiewicz, K. J. Kurzydłowski, Microstructure and properties of metal/ceramic and ceramic/ceramic multilayer coatings on titanium alloy Ti6Al4V, Surf. Coat. Technol. 309, 709-718 (2017).
• [9] D. Kenfaui, D. Chateigner, M. Gomina, J. G. Noudem, Anisotropy of the mechanical and thermoelectric properties of hot-pressed single-layer and multi-layer thick Ca3Co4O9 ceramics, Int. J. Appl. Ceram. Technol. 1 (8), 214-226 (2011).
• [10] F. Chabert, D. E. Dunstan, G. V. Franks, Cross-linked poly vinyl alcohol as a binder for gelcasting and green machining, J. Am. Ceram. Soc. 91 (10), 3138-46 (2008).
• [11] P. Falkowski, A. Grzelak, Effect of solvents on curing process of photopolymerizable ceramic suspensions, Arch. Metall. Mater. 58, 1411-4 (2013).
• [12] P. Sepulveda, J. G. P. Binner, Persulfate-amine initiation systems for gelcasting of ceramic foams, Chem. Mater. 13, 4065-70 (2001).
• [13] P. Falkowski, M. Szafran, Role of molecular structure of monosaccharides on the viscosity of aqueous nanometric alumina suspension, Ceram. Int. 42, 8572-8580 (2016).
• [14] A. C. Young, O. O. Omatete, M. A. Janney, P. A. Menchhofer, Gelcasting of alumina, J. Am. Ceram. Soc. 74 (3), 612-618 (1991).
• [15] I. Santacruz, M. I. Nieto, J. Binner, R. Moreno, Gel casting of aqueous suspensions of BaTiO3 nanopowders, Ceram. Int. 35, 321-6 (2009).
• [16] J. Xu, Y. Zhang, K. Gan, X. Zhang, Y. Qu, N. Ma, J. Yang, A novel gelcasting of alumina suspension using curdlan gelation, Ceram. Int. 41, 10520-10525, (2015).
• [17] K. Studer, C. Decker, E. Beck, R. Schwalm, Overcoming oxygen inhibition in UV-curing of acrylate coatings by carbon dioxide inerting, Part I. Prog. Org. Coat. 48, 92-100 (2003).
• [18] M. Potoczek, A catalytic effect of alumina grains onto polymerization rate of methacrylamide-based gelcasting system. Ceram. Int. 32, 739-744 (2006).
• [19] Ma J., Yi Z., Xie Z., Zhou L., Miao H., Zhang B., Lin X., Gelcasting of alumina with mixed PVP – MAM system, Ceram. Int. 31, 1015-1019 (2005).
• [20] P. Bednarek, M. Szafran, Thermal decomposition of monosaccharides derivatives applied in ceramic gelcasting process investigated by the coupled DTA/TG/MS analysis, J. Therm. Anal. Calorim. 109, 773-782 (2012).
• [21] J. Yang, J. Yu, Y. Huang, Recent developments in gelcasting of ceramics, J. Eur. Ceram. Soc. 31, 2569-2591 (2011).
• [22] A. Idzkowska, P. Wiecinska, M. Szafran, Acryloyl derivative of glycerol in fabrication of zirconia ceramics by polymerization in situ, Ceram. Int. 40, 13289-13298 (2014).
• [23] Y. Chang, R. Bermejo, O. Ševeček, G. L. Messing, Design of alumina-zirconia composites with spatially tailored strength and toughness, J. Eur. Ceram. Soc. 35, 631-640 (2015).
• [24] A. H. De Aza, J. Chevalier, G. Fantozzi, M. Schehl, R. Torrecillas, Crack growth resistance of zirconia toughened alumina ceramics for joint prostheses, Biomaterials. 23 (3), 937-945 (2002).
• [25] J. Ramírez-Rico, J. Martínez-Fernandez, J. I. Peña, D. Singh, J. Routbort, Residual stresses in Al2O3-ZrO2 (3 mol.% Y2O3) directionally solidified eutectic ceramics as a function of temperature, Mater. Sci. Eng. A-Struct. 541, 61-66 (2012).
• [26] A. Wojteczko, R. Lach , K. Wojteczko, Z. Pędzich, Investigations of the subcritical crack growth phenomenon and the estimation of lifetime of alumina and alumina-zirconia composites with different phase arrangements, Ceram. Int. 42, 9438-42 (2016).
• [27] G. Magnania, A. Brillanteb, Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia-alumina composites, J. Eur. Ceram. Soc. 25, 3383-92 (2005).
• [28] P. Wiecinska, T. Mizerski, M. Szafran, Monoacryloyl esters of carbohydrates: synthesis, polymerization and application in ceramic technology, Carbohydr. Polym. 111, 610-618 (2014).
• [29] A. Szudarska, T. Mizerski, M. Szafran, Galactose monoacrylate as a new monomer in gelcasting process, Arch. Metall. Mater. 56, 1211 (2011).
• [30] P. Wiecinska, T. Graule, M. Szafran, L-Ascorbic acid as a new activator in fabrication of ceramics by techniques using in situ polymerization, J. Eur. Ceram. Soc. 34, 1581-1589 (2014).
• [31] E. S. Alvarenga, V. M. T. Carneiro, F. O. Silvério, W. A. Saliba, J. Chil. Chem. Soc. 51 (3), 986-988 (2006).
• [32] H. Yokoyama, K. Otaya, H. Kobayashi, M. Miyazawa, S. Yamaguchi, Y. Hirai, Palladium(II)-catalyzed cyclization of urethanes and total synthesis of 1-deoxymannojirimycin. Org. Lett. 2 (16), 2427-9 (2000).
• [33] D. Coric, M. Majic Renjo, I. Zmak, Critical evaluation of indentation fracture toughness measurements with Vickers indenter on yttria-stabilized zirconia dental ceramics, Mat. Wiss. u. Werkstofftech. 48, 767-772 (2017).
• [34] A. Wojteczko, R. Lach, K. Wojteczko, Z. Pędzich, Investigations of the subcritical crack growth phenomenon and the estimation of lifetime of alumina and alumina-zirconia composites with different phase arrangements, Ceram. Int. 42 (8), 9438-9442 (2016).
• [35] G. Grabowski, R. Lach, Z. Pędzich, K . Świerczek, A. Wojteczko, Anisotropy of thermal expansion of 3Y-TZP, α-Al2O3 and composites from 3Y-TZP/α-Al2O3 system, Arch. Civ. Mech. Eng. 18 (1), 188-197 (2018)

Uwagi

EN

1. The project has been financially supported by National Science Centre of Poland (Agreement No. UMO-2014/15/D/ST5/02574).

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).