Hydrogen Embrittlement of Welded Joint Made of Supermartensitic Stainless Steel in Environment Containing Sulfane

• Autorzy: Jonšta P. , Váňová P. , Brožová S. , Pustějovská P. , Sojka J. , Jonšta Z. , Ingaldi M.

Identyfikatory

DOI

10.1515/amm-2016-0121

• Języki publikacji: EN

Abstrakty

EN

The work is focused on evaluation of resistance of the welded joint made of supermartensitic 13Cr6Ni2.5Mo stainless steel to sulfide stress cracking. Testing method A and solution B in accordance with NACE TM 0177 were used. All the testing samples were ruptured in a very short time interval but welded joint samples were fractured primarily in the weld metal or in heat affected zone and not in the basic material. Material analysis of samples were made with use of a ZEISS NEOPHOT 32 light microscope and a JEOL 6490LV scanning electron microscope.

Słowa kluczowe

EN

hydrogen embrittlement; sulfane; tensile test; supermartensitic stainless steel; weld joint

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 709--712
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Jonšta P.

• VSB - Technical University of Ostrava, Department of Metallurgy, 17. Listopadu 15/2172, 70833 Ostrava-Poruba, Czech Republic

autor

Váňová P.

• VSB - Technical University of Ostrava, Department of Metallurgy, 17. Listopadu 15/2172, 70833 Ostrava-Poruba, Czech Republic

autor

Brožová S.

• VSB - Technical University of Ostrava, Department of Metallurgy, 17. Listopadu 15/2172, 70833 Ostrava-Poruba, Czech Republic

autor

Pustějovská P.

• VSB - Technical University of Ostrava, Department of Metallurgy, 17. Listopadu 15/2172, 70833 Ostrava-Poruba, Czech Republic

autor

Sojka J.

• VSB - Technical University of Ostrava, Department of Metallurgy, 17. Listopadu 15/2172, 70833 Ostrava-Poruba, Czech Republic

autor

Jonšta Z.

• VSB - Technical University of Ostrava, Department of Metallurgy, 17. Listopadu 15/2172, 70833 Ostrava-Poruba, Czech Republic

autor

Ingaldi M.

• Czestochowa Univerity of Technology, Faculty of Management, 19b Armii Krajowej Av., 42-200 Czestochowa,Poland

Bibliografia

• [1] K. Kondo, M. Ueda, K. Ogawa, H. Amaya, H. Hirata, H. Takabe, Proceedings of Supermartensitic Stainless Steels, 11-18 (1999).
• [2] A. Dhooge, Stainless Steels World, 52-55 (1999).
• [3] M. Kimura, Y. Miyata, Y. Yamane, T. Toyooka, Y. Nakano, CORROSION´97, NACE, 22 (1997).
• [4] D. Carrouge, P. Woollin, Proceedings of Stainless Steel World, 61-67 (2002).
• [5] P. Woollin, A. Kostrivas, Proceedings of OMAE, 92351 (2006).
• [6] Y. Miyata, M. Kimura, H. Nakamichi, K. Sato, N. Itakura, K. Masamura, Proceedings of International Corrosion Conference EUROCORR, Nice, France ISBN 2-901785-82-4, CD-ROM (2004).
• [7] J. Bilík, P. Pustějovská, S. Brožová, S. Jursová, Scientia Iranica 20, 2, 337-342 (2012).
• [8] P. Pustějovská, S. Jursová, S. Brožová, Journal of the Chemical Society of Pakistan 35, 3, 565-569 (2013).
• [9] P. Pustějovská, S. Brožová, S. Jursová, Metal Conference Procidings 79-83 (2010).
• [10] A. Konstanciak, S. Brožová, P. Pustějovská, Rynek Energii 107, 4, 33-36 (2013).