Simple diagnostic technique of a single IGBT open-circuit faults for a SVM-VSI vector controlled induction motor drive

• Autorzy: Orlowska-Kowalska T. , Sobański P.

Identyfikatory

DOI

10.1515/bpasts-2015-0032

• Języki publikacji: EN

Abstrakty

EN

In this paper a simple diagnostic system for a single IGBT open-circuit faults for a two level voltage inverter-fed field oriented controlled induction motor drive was presented. A fault diagnostic procedure is carried out by utilizing an analysis of a stator current vector trajectory in α-β coordinates. An extraction of the failure information is based on monitoring of an angle between the stator current space vector and the axis. Thanks to a diagnostic signal normalization, high robustness to false diagnosis alarms is guaranteed. To confirm the proposed method, simulation results under a wide range working condition of the induction motor drive were presented.

Słowa kluczowe

EN

induction motor; voltage inverter; IGBTs; fault diagnosis

PL

silnik indukcyjny; przetwornica napięcia; IGBTs; błąd diagnostyczny

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2015
• Tom: Vol. 63, nr 1
• Strony: 281--288
• Opis fizyczny: Bibliogr. 17, wykr., rys.

Twórcy

autor

Orlowska-Kowalska T.

• Department of Electrical Machines, Drives and Measurements, Wroclaw University of Technology, 27 Wybrzeże Wyspiańskiego St., 50-370 Wrocław, Poland

autor

Sobański P.

• Department of Electrical Machines, Drives and Measurements, Wroclaw University of Technology, 27 Wybrzeże Wyspiańskiego St., 50-370 Wrocław, Poland

Bibliografia

• [1] R. Isermann, Fault-Diagnosis Applications, Model-Based Condition Monitoring: Actuators, Drives, Machinery, Plants, Sensors, and Fault-tolerant Systems, Springer-Verlag, Berlin, 2011.
• [2] C.T. Kowalski and M. Kaminski, “Rotor fault detector of the converter-fed induction motor based on RBF neural network”, Bull. Pol. Ac.: Tech. 62 (1), 69-76 (2014).
• [3] S. Yang, D. Xiang, P. Bryant, L. Ran, and P. Tavner, “Condition monitoring for device reliability in power electronic converters: a review”, IEEE Trans. on Power Electronics 25 (11), 2734-2752 (2010).
• [4] A.M.S. Mendes and A.J. Marques Cardoso, “Voltage source inverter fault diagnosis in variable speed AC drives, by the average current Park’s vector approach”, Int. Conf. on Electr. Mach. and Drives 1, 704-706 (1999).
• [5] R. Peuget, S. Courtine, and J.-P. Rognon, “Fault detection and isolation on a PWM inverter by knowledge-based model”, IEEE Trans. Ind. Appl. 34 (6), 1318-1326 (1998).
• [6] W. Sleszynski, J. Nieznanski, and A. Cichowski, “Real-time fault detection and localization vector-controlled induction motor drives”, 11th Eur. Conf. on Pow. Electr. and Appl. 1, 2-8 (2005).
• [7] M. Trabelsi, M. Boussak, and M. Gossa, “Multiple IGBTs open circuit faults diagnosis in voltage source inverter fed induction motor using modified slope method”, 19th Int. Conf. on Electr. Mach. 1, 1-8 (2010).
• [8] Y. Guan, D. Sun, and Y. He, “Mean current vector based online real-time fault diagnosis for voltage source inverter fed induction motor drives”, IEEE Electr. Mach. & Drives Conf. 2, 1114-1118 (2007).
• [9] P. Jang-Hwan, K. Dong-Hwa, K. Sung-Suk Kim, L. Dae- Jong, and C. Myung-Geun, “C-ANFIS based fault diagnosis for voltage-fed PWM motor drive systems”, IEEE Ann. Meet. Fuzzy Inf. Proc. 1, 379-383 (2004).
• [10] P. Gilreath and B.N. Singh, “A new centroid based fault detection method for 3-phase inverter-fed induction motors”, 36th IEEE Pow. Electr. Spec. Conf. 1, 2664-2669 (2005).
• [11] F. Zidani, D. Diallo, E.H.M. Benbouzid, and R. Nait-Said, “A fuzzy-based approach for the diagnosis of fault modes in a voltage-fed PWM inverter induction motor drive”, IEEE Trans. Ind. Electr. 55 (2), 586-593 (2008).
• [12] V.F. Pires, T.G. Amaral, D. Sousa, and G.D. Marques, “Fault detection of voltage-source inverter using pattern recognition of the 3D current trajectory”, 8th IEEE Reg. Int. Conf. on Comp. Tech. 1, 617-621 (2010).
• [13] P. Sobanski and T. Orlowska-Kowalska, “Low-cost faulttolerant control scheme for SVM two-level voltage-inverter-fed induction motor drive with MRASCC speed estimator”, 11th Int. Conf. on Modeling and Simul. of Electr. Mach., Converters and Systems Electr. IMACS 2014, 561-566 (2014).
• [14] T. Orłowska-Kowalska and P. Sobański, “Review of two-level voltage inverters resistant to defect of IGBT transistors”, Scientific Works of the Inst. Electr. Machines., Drives and Measurements of Wroclaw Univ. of Technol., ser. Studies and Materials, Ser. Studies and Materials 33, 54-69 (2013), (in Polish).
• [15] B. Cui, “Simulation of inverter with switch open faults based on switching function”, Proc. IEEE Int. Conf. Automat. and Logist. 1, 2774-2778 (2007).
• [16] T. Orlowska-Kowalska, Sensorless Induction Motor Drives, Wroclaw University of Technology Press, Wroclaw, 2003.
• [17] G. Extremiana, G. Abad, J. Arza, J. Chivite-Zabalza, and I. Torre, “Rotor flux oriented control of induction machine based drives with compensation for the variation of all machine parameters”, Bull. Pol. Ac.: Tech. 61 (2), 309-324 (2013).