Drilling and bolting rigs operator support using FGS (Feeder Guiding System) and remote control

• Autorzy: Sarecki Łukasz , Ostapow Lesław , Ławicki Piotr , Mendyka Paweł

Identyfikatory

DOI

10.2478/ntpe-2019-0005

• Języki publikacji: EN

Abstrakty

EN

The article presents the assumptions and main functionalities of two operator support systems - the FGS (Feeder Guiding System) and the remote control system of a drilling or bolting rig. Both of these systems greatly facilitate the work of an operator of a self-propelled mining vehicle in the conditions of an underground metal ore mine. The first of the described system allows for real-time control of the current position of the mining boom and facilitates the drilling of blast holes according to a predetermined drilling pattern. The second of the systems - a remote control system - is used especially in conditions of unstable rock mass or in the case of work in particularly difficult operating conditions, where it is advisable to limit the presence of the crew from the face-up to the necessary minimum. The intensity of these vibrations was related to the conditions of the cutting process.

Słowa kluczowe

EN

drilling rig; bolting rig; drilling control; remote control; drilling feeder system

PL

wiertnica; wóz kotwiący; kontrola wiercenia; zdalne sterowanie

• Wydawca: STE GROUP ; De Gruyter
• Czasopismo: New Trends in Production Engineering
• Rocznik: 2019
• Tom: Vol. 2, Iss. 1
• Strony: 50--58
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Sarecki Łukasz

• Mine Master Ltd., Poland

autor

Ostapow Lesław

• Mine Master Ltd., Poland

autor

Ławicki Piotr

• Mine Master Ltd., Poland

autor

Mendyka Paweł

• Mine Master Ltd., Poland

Bibliografia

• 1. Derlukiewicz, D., Karliński, J. (2012). Static and dynamic analysis of telescopic boom of self-propelled tunnelling machine. Journal of Theoretical and Applied Mechanics, 50, 47-59.
• 2. Karliński, J., Ptak, M., Działak, P., Rusiński, E. (2016). The approach to mining safety improvement: Accident analysis of an underground machine operator. Archives of Civil and Mechanical Engineering, 16(3), 503-512.
• 3. Kotwica, K. (2008). Scenarios of technological development of roadways mining in polish coal mines conditions. Gospodarka Surowcami Mineralnymi = Mineral Resources Management, 24(1), 139-152.
• 4. Kwasniewski, J., Kravtsov, Y., Dominik, I., Dorobczynski, L., Lalik, K. (2013). Self-Excited Acoustical System for Stress Measurement in Mass Rocks. Journal of Low-Frequency Noise, Vibration and Active Control, 32(1-2), 133-144.
• 5. Mendyka, P., Kotwica, K., Stopka, G., Gospodarczyk, P., Bołoz, Ł. (2016). The design and analysis of drilling and bolting rigs for narrow vein exploitation. International Multidisciplinary Scientific GeoConference: SGEM: Surveying Geology & Mining Ecology Management, 2, 881-888.
• 6. Mendyka, P., Kotwica, K., Stopka, G., Gospodarczyk, P. (2017). Dynamic and durability tests of drilling rig for narrow vein deposits. International Multidisciplinary Scientific GeoConference: SGEM: Surveying Geology & Mining Ecology Management, 17(1.3), 275-282.
• 7. Minemaster.eu, (2019). Mine Master Company Official Website. [online] Available at: http://www.minemaster.eu/ [Accessed 20 May 2019].
• 8. Ostapów, L., Ławicki, P. (2016). Mechatroniczny układ sterowania dla ciągłej kontroli procesu wiercenia. Transport Przemysłowy i Maszyny Robocze, (4), 29-31.
• 9. Paul, R. P. (1981). Robot manipulators: mathematics, programming, and control: the computer control of robot manipulators. Richard Paul.