PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wettability of the System of Cast Iron and Magnesia Ceramics with Graphite

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this paper examinations of high-temperature wetting tests of 3 systems of liquid alloy – cast iron in contact with ceramic materials: magnesia ceramics in combination with natural graphite were presented. After wettability testing, the microscopic observations of the morphology of the sample surface and the cross-section microstructure with the chemical composition in micro-areas were examined. One of the objective of this work was also to verify whether the graphite content would affect the wettability of the magnesia ceramics. The study of high-temperature wetting kinetics of the liquid alloy in contact with the ceramic material, by the "sessile drop" method with capillary purification (CP) procedure was conducted. Under the test conditions, at a temperature of 1450°C and time 15 minutes, all 3 experimental systems showed a non-wetting behaviour. The average contact angle for the system with cast iron drop on magnesia ceramics was 140°, on magnesia ceramics with 10 parts per weight of graphite was 137° and on magnesia ceramics with 30 parts per weight of graphite - 139°. Microscopic observations revealed that in the case of the sample consisting of the cast iron drop on the substrate with magnesia ceramics, the formation of fine separations was not observed, unlike the systems with the substrate with magnesia ceramics and the addition of natural graphite. Numerous, fine droplets accumulate on the graphite flakes and consist mainly of Si as well as Fe and O. On the other hand, the rough MgO grains have a gray, matt surface, without fine separations. The conducted observations indicate the mechanical nature of the bonding - liquid metal penetrates into the pores of the rough ceramics of the substrate. However, in the case of systems of cast iron drop with magnesia ceramics and addition of graphite, probably the adhesive connection and the physical attraction of elements derived from cast iron drop with the flake graphite appeared as well.
Rocznik
Strony
25--33
Opis fizyczny
Bibliogr. 13 poz., il., tab., wykr.
Twórcy
  • Łukasiewicz Research Network - Krakow Institute of Technology, Poland
autor
  • Łukasiewicz Research Network - Krakow Institute of Technology, Poland
  • Łukasiewicz Research Network - Krakow Institute of Technology, Poland
  • Łukasiewicz Research Network - Krakow Institute of Technology, Poland
  • Łukasiewicz Research Network - Krakow Institute of Technology, Poland
  • Łukasiewicz Research Network - Krakow Institute of Technology, Poland
Bibliografia
  • [1] Sobczak, N., Sobczak, J.J., Kolev, M., Drenchev, L., Turalska, P., Homa, M., Kudyba, A. & Bruzda, G. (2020). High-temperature interaction of molten gray cast iron with Al2O3-ZrO2-SiO2 ceramic. Journal of Materials Engineering and Performance. 29, 2499-2505. DOI: 10.1007/s11665-020-04695-z.
  • [2] Malaki, M., Fadaei Tehrani, A., Niroumand, B. & Gupta, M. (2021). Wettability in metal matrix composites. Metals. 11(7), 1034. DOI: 10.3390/met11071034.
  • [3] Sobczak, N., Singh, M. & Asthana, R. (2005). High-temperature wettability measurements in metal/ceramic systems – Some methodological issues. Current Opinion in Solid State & Materials Science. 9(4-5), 241-253. DOI: 10.1016/j.cossms.2006.07.007.
  • [4] Szafran, M., Rokicki, G., Lipiec, W., Konopka, K. & Kurzydłowski K. (2002). Porous ceramics infilted with metals and polymers. Composites. 2(5), 313-317. (in Polish).
  • [5] Madzivhandila T., Bhero, S. & Varachia F. (2019). The influence of titanium addition on wettability of high-chromium white cast iron-matrix composites. Journal of Composite Materials. 53(11), 1567-1576. DOI: 10.1177/ 0021998318804616.
  • [6] Asthana R. & Sobczak N. (2000). Wettability, spreading, and interfacial phenomena in high-temperature coatings. Retrieved September 28, 2021, from https:// www.researchgate.net/profile/Natalia-Sobczak/publication/ 234787198_Wettability_Spreading_and_Interfacial_Phenomena_in_High-Temperature_Coatings/links/02e7e51acdbb 31120a000000.pdf.
  • [7] Janas, A., Kolbus, A. & Olejnik, E. (2009). On the character of matrix-reinforcing particle phase boundaries in MeC and MeB (Me = W, Zr, Ti, Nb, Ta) in-situ composites. Archives of Metallurgy and Materials 54(2), 319-327.
  • [8] Moreira, A. B., Sousa, R. O., Lacerda, P., Ribeiro, L. M. M., Pinto, A. M. & Vieira, M. F. (2020). Microstructural characterization of TiC–white cast-iron composites fabricated by in situ technique. Materials. 13(1), 209. DOI:10.3390/ma13010209.
  • [9] Sobczak, N., Nowak, R., Radziwill, W., Budzioch, J. & Glenz A. (2008). Experimental complex for investigations of high temperature capillarity phenomena. Materials Science and Engineering 495(1-2), 43-49. DOI: 10.1016/j.msea. 2007.11.094.
  • [10] ASTRA Reference book. IENI, Report, Oct. 2007
  • [11] Liggieri, L. & Passerone, A.(1989). An automatic technique for measuring the surface tension of liquid metals. High Temperature Technology. 7, 80-86.
  • [12] Bacior, M., Sobczak, N., Homa, M., Turalska, P., Kudyba, A., Bruzda, G., Nowak, R. & Pytel, A. (2017). High-temperature interaction of molten vermicular graphite cast iron with Al2O3 substrate. The Transactions of the Foundry Research Institute. 4/2017, 375-384. DOI: 10.7356/ iod.2017.41.
  • [13] Shen, P., Zhang, L., Zhou, H., Ren, Y. & Wang, Y. (2017). Wettability between Fe-Al alloy and sintered MgO. Ceramics International. 43(10), 7674-7681. DOI:10.1016/ J.CERAMINT.2017.03.067.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-8996526b-51cf-4a4a-ae7c-a2a1b971b25a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.