Frequency and temperature dependence of dielectric and electric properties of Ba2-xSm4+2x/3Ti8O24 with structural analysis

• Autorzy: Narang S. B. , Kaur D. , Pubby K.

Identyfikatory

DOI

10.1515/msp-2015-0034

• Języki publikacji: EN

Abstrakty

EN

Dielectric ceramics samples of barium titanium oxide doped with samarium, having a complex structural formula of Ba_2-xSm_4+2x/3Ti₈O₂₄ (referred to as BST), were fabricated by a high temperature solid-state reaction technique with varying x (0.0, 0.2, 0.4, 0.6). X-ray diffraction technique was used to check the formation of particular phases. Scanning electron microscope technique was used to study the surface morphology of the samples. The samples were studied in a temperature range of 298 K to 623 K and frequency range of 10 KHz to 1 MHz. The dielectric constant (ε_r), loss tangent (tanδ), and AC conductivity (σ_AC) were measured on sintered disks of BST samples. The DC resistivity of different compositions was measured at room temperature. Detailed studies of dielectric and electrical properties showed that these properties are strongly dependent on composition, frequency and temperature. The compounds showed stable behavior in lower temperature range (up to 523 K), therefore, they can be used in practical applications in this temperature range.

Słowa kluczowe

EN

barium samarium titanate; BST; dielectric constant; loss tangent; AC conductivity; DC resistivity

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2015
• Tom: Vol. 33, No. 2
• Strony: 268--277
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Narang S. B.

• Department of Electronics Technology, Guru Nanak Dev University, Amritsar, Punjab, India

autor

Kaur D.

• Department of Electronics and Communication Engineering, Punjab Technical University, PIT University Campus, Kapurthala, India

autor

Pubby K.

• Department of Electronics Technology, Guru Nanak Dev University, Amritsar, Punjab, India

Bibliografia

• [1] NARANG S.B., BAHEL S., J. Ceram. Process. Res., 11 (3) (2010), 316.
• [2] CHEREMISINOFF N.P. (Ed.), Handbook of Ceramics and Composites, Synthesis and Properties, Marcel Dekker Inc., 1990.
• [3] HUANG C.-L., CHEN Y.-C., Mat. Sci. Eng. A-Struct., 345 (1 – 2) (2003), 106.
• [4] OHSATO H., OHHASHI T., KATO H., NISHIGAKI S., OKUDA T., Jpn. J. Appl. Phys., 34 (1995), 5413.
• [5] HIRANO S.I., HAYASHI T., HATTORI A., J. Am. Ceram. Soc., 77 (1991), 1320.
• [6] KOLAR D., GABERSCEK S., VOLAVSEK B., PARKER H.S., ROTH R.S., J. Solid State Chem., 38 (1981), 158.
• [7] VALANT M., SOVOROV D., KOLAR D., Jpn. J. Appl. Phys., 35 (1996), 144.
• [8] NARANG S.B., KAUR D., Integr. Ferroelectr., 105 (1) (2009), 87.
• [9] NARANG S.B., KAUR D., THIND K.S., J. Ceram. Process. Res., 7 (1) (2006), 31.
• [10] KUMAR G., SHARMA S., KOTNASM R.K., SHAH J., SHIRSATH S.E., BATOO K.M., SINGH M., J. Mol. Struct., 1051 (2013), 336.
• [11] ALEXANDRU H.V., BERBECARU C., IOACHIM A., TOASCSEN M.I., NEDELCU L., GHETU D., Mater. Sci. Eng. B-Adv., 109 (2004), 152.
• [12] OHSATO H., OHHASHI T., NISHIGAKI S., OKUDA T., SUMIYA K., SUZUKI S., Jpn. J. Appl. Phys., 32 (1993),4323.
• [13] ARSHAD M., AHMED A.S., AZAM A., NAQVI A.H., J. Alloy. Comp., 577 (2013), 469.
• [14] KYRITSIS A., PISSIS P., GRAMMATIKAKIS J., J. Polym. Sci. Pol. Phys., 33 (1995), 1737.
• [15] MOULSON A.J., HERBERT J.M., Electroceramics: Materials, Properties and Application, Wiley, London, 2003.
• [16] CHOUDHARY R.N.P., SUTAR B.C., DAS PIYUSH R., Ceram. Int., 40 (2014), 7791.
• [17] SABESTIAN M.T., Dielectric Materials for Wireless Communication, Elsevier, New York 2008.
• [18] TZING W.H., TUAN W.H., LIN H.L., Ceram. Int., 25 (5) (1999), 425.
• [19] SRINIVAS K., SARAH P., SURYANARAYANA S.V., B. Mater. Sci., 26 (2) (2003), 247.
• [20] CHAOUCHI A., ZIDI N., D’ASTORG S., RGUTI M., COURTOIS C., J. Alloy. Compd., 590 (2014), 557.
• [21] POLLOCK D.D., Physical properties of Materials for Engineers, CRC Press, Boca Raton, 1976.
• [22] KAUR D., NARANG S. B., SINGH K., Ceram. Int., 33 (2) (2007), 249.