Microstructure, Chemical and Phase Composition of Clad Layers of Inconel 625 and Inconel 686

• Autorzy: Solecka M. , Kopia A. , Petrzak P. , Radziszewska A.

Identyfikatory

DOI

10.24425/118969

• Języki publikacji: EN

Abstrakty

EN

The article presents the investigation results of microstructural, chemical composition changes after clad layers of Inconel 625 and Inconel 686 alloys weld overlaid on boiler tubes. The boiler tubes made of 16Mo3 steel were cladded in the Boiler Factory SEFAKO S.A. using CMT technique. The microstructure and chemical composition of coatings were analysed using light microscopy, scanning and transmission electron microscopy. The value of the partition coefficient k was determined for Inconel 625 and Inconel 686 clad layers. The value was calculated by dividing the average content (% wt.) of Ni, Cr, Mo, Fe, Nb and W.

Słowa kluczowe

EN

Inconel 625; Inconel 686; SEM; EDS; TEM

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 1
• Strony: 513--518
• Opis fizyczny: Bibliogr. 18 poz., rys., tab.

Twórcy

autor

Solecka M.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Kopia A.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Petrzak P.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Radziszewska A.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] Special Metals Corporation, Inconel and Incoloy are trademarks of the Special Metals Corporation group of companies, Publication Number SMC-063 (2006).
• [2] O. H. Madsen, New technologies for waste to energy plants, 4th International Symposium on waste treatment technologies, Babcock & Wilcox Vølund, Sheffield 2003.
• [3] T. Baldridge, G. Poling, E. Foroozmehr, R. Kovacevic, T. Metz, V. Kadekar, M. Gupta, Opt. Laser Eng. 51, 180-184 (2012).
• [4] H. N. Moosavy, M. R. Aboutalebi, S. H. Seyedein, J. Mater. Process. Tech. 212, 2210-2218 (2012).
• [5] R. Revie, H. Uhlig, Corrosion and corrosion control, John Wiley & Sons, New York 2008.
• [6] D. R. Muzyka, in: C. T. Sims, W. C. Hagel (Eds.), The Superalloys, Wiley, New York 1972.
• [7] C. C. Silva, C. R. M. Afonso, A. J. Ramirez, M. F. Motta, H. C. Miranda, J. P. Farias, J. Alloys Compd. 684, 628-642 (2016).
• [8] Lee. Y.-Ho, Kim. I.-S., Wear 253, 438-47 (2002).
• [9] Fronius company, CMT: Cold Metal Transfer – MIG/MAG dip-transfer arc process.
• [10] J. Bruckner, Przegląd Spawalnictwa 7-8, 24-27 (2009) (in polish).
• [11] M. Rozmus-Górnikowska, M. Blicharski, J. Kusiński, Kovove Mater. 52, 1-7 (2014).
• [12] Special Metals Corporation: Inconel and Incaloy are trademarks of the Special Metals Corporation group of companies. Publication Number SMC-063 (2006).
• [13] Special Metals Corporation: Inconel, Incoloy, Inco-Weld, Incoflux and 686CPT are trademarks of the Special Metals Corporation group of companies. Publication Number SMC-024 (2005).
• [14] M. Rozmus-Górnikowska, L. Cieniek, M. Blicharski, J. Kusiński, Arch. Metall. Mater. 59, 1081-1084 (2014).
• [15] J. Kusiński, M. Blicharski, Ł. Cieniek, S. Dymek, M. Rozmus-Górnikowska, M. Solecka, K. Faryj, Inżynieria Materiałowa 6 (208), 363-367 (2015) (in polish).
• [16] J. N. Du Pont, Metall. Mater. Trans. A 27A, 3612-3620 (1996).
• [17] J. N. Du Pont, C. V. Robino, A. R. Marder, Solidification and weldability of Nb-bearing superalloys, Weld. J. (Research supplement) 77 (10), 417-431 (1998).
• [18] J. N. Du Pont, J. C. Lippold, S. D. Kiser, Welding metallurgy and weldability of nickel-base Alloys, John Wiley & Sons, 2009.

Uwagi

EN

1. The project was financed by National Science Centre, Poland. Grant numer DEC-2014/15/N/ST8/02625

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).