Thermal Comfort Properties of Clothing Fabrics Woven with Polyester/Cotton Blend Yarns

• Autorzy: Özdemir H.

Identyfikatory

DOI

10.1515/aut-2016-0012

• Języki publikacji: EN

Abstrakty

EN

In this research, thermal and water vapor resistance, components of thermal comfort of 65/35 and 33/67% polyester/ cotton (PES/CO) blend fabrics woven with 2/2 twill, matt twill, cellular and diced weaves, which are commonly used for clothing, were determined. The results indicate that both the fabric construction and the constituent fiber properties affect thermal comfort properties of clothing woven fabrics. Cellular weave, which is derivative of sateen weave and diced weave, which is compound weave, has the highest thermal resistance appropriating for cold climatic conditions. On the other hand, the 2/2 twill weave and matt twill weave, which is derivative of sateen weave, depicted the lowest water vapor thermal resistance, making it convenient for hot climatic conditions. Besides, fabrics woven with 65/35% PES/CO blend yarns have higher thermal resistance, so they are suitable for cold climatic conditions. Fabrics woven with 33/67% PES/CO blend yarns have lower water vapor resistance, so they are convenient for hot climatic conditions.

Słowa kluczowe

EN

thermal comfort; thermal resistance; water vapour resistance; woven fabrics; twill weave; derivative weave; compound weave

PL

komfort termiczny; opór cieplny; opór pary wodnej; tkaniny; splot skośny; splot

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2017
• Tom: Vol. 17, no. 2
• Strony: 135--141
• Opis fizyczny: Bibliogr. 16 poz.

Twórcy

autor

Özdemir H.

• Dokuz Eylül University, Department of Textile Engineering, İzmir, Turkey Tel: [phone], Fax: [phone]

Bibliografia

• [1] Das, B., Das, A., Kothari, V.K., Fanguiero, F., de Araújo, M. (2007). Moisture transmission through textiles Part I: Processes involved in moisture transmission and the factors at play. AUTEX Research Journal, 7(2), 100-110.
• [2] Das, B., Das, A., Kothari, V.K., Fanguiero, F., de Araújo, M. (2007). Moisture transmission through textiles Part II: Evaluation Methods and Mathematical Modelling. AUTEX Research Journal, 7(3), 194-216.
• [3] Ciesielska-Wrobel, I., De Mey, G., Van Langenhove, L. (2016). Dry heat transfer from the skin surface into textiles: subjective and objective measurement of thermal haptic perception of textiles - preliminary studies, The Journal of The Textile Institute, 107(4), 445-455.
• [4] Ahmad, S., Ahmad, F., Afzal, A., Rasheed, A., Mohsin, M., Ahmad, N. (2015). Effect of weave structure on thermo-physiological properties of cotton fabrics. AUTEX Research Journal, 15(1), 30-34.
• [5] Cybulska, M., Snycerski, M., Ornat, M. (2002). Qualitative Evaluation of protective fabrics. AUTEX Research Journal, 2(2), 69-77.
• [6] Laourine, E., Cherif, C. (2011). Characterisation of barrier properties of woven fabrics for surgical protective textiles. AUTEX Research Journal, 11(2), 31-36.
• [7] Behera, B.K. (2007). Comfort and handle behaviour of linen-blended fabrics. AUTEX Research Journal, 7(1), 33-47.
• [8] Kakvan, A., Najar, S.S., Psikuta, A. (2015). Study on effect of blend ratio on thermal comfort properties of cotton/nylon-blended fabrics with high-performance Kermel fibre. The Journal of The Textile Institute, 106(6), 674-682.
• [9] Mahbub, R.F., Wang, L., Arnold, L., Kaneslingam, S., Padhye, R. (2014). Thermal comfort properties of Kevlar and Kevlar/wool fabrics. Textile Research Journal, 84(19), 2094-2102.
• [10] Matusiak, M., Kowalczyk, S. (2014). Thermal-insulation properties of multilayer textile packages. AUTEX Research Journal, 14(4), 299-307.
• [11] Chen, Q., Zhao, T. (2015). The thermal decomposition and heat release properties of the nylon/cotton, polyester/ cotton and Nomex/cotton blend fabrics. Textile Research Journal, DOI: 10.1177/0040517515617423, 1-10.
• [12] Başer, G. (2004). Technique and art of weaving (Vol. 1). İzmir: Punto (in Turkish).
• [13] Das, A., Alagirusamy, R., Kumar, P. (2011). Study of heat transfer through multilayer clothing assemblies: a theoretical prediction. AUTEX Research Journal, 11(2), 54-60.
• [14] Uğur, Ş.S., Sivri, Ç. (2008). The comparison of water vapour measurement techniques for textiles. Electronic Journal of Textile Technologies, (3), 13-20 (in Turkish).
• [15] Galceran, V. (1962). Weaving technology. Terrassa: Technical University of Catalonia (in Spanish).
• [16] ISO 11092 (2014). Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test).

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).