Nickel Composite Coatings Reinforced Nano SiC Particles

• Autorzy: Nowak M. , Mizera J. , Kłyszewski A. , Dobkowska A. , Boczkal S. , Kozik A. , Koprowski P.

Identyfikatory

DOI

10.24425/amm.2020.132841

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of the electrodeposition of nickel composite coatings reinforced with the nano size SiC ceramic particles. The type and size of the ceramic particles or organic additives used play a important role during electrodeposition processes. A Watts type galvanic bath with various organic additives was used. These additives were: 2-sulfobenzoic acid imide, dioctyl sulfosuccinate sodium salt (DSS), sodium dodecyl sulfate, tris (hydroxymethyl) aminomethane and hexamethyldisilizane. The nickel composite coating was electrodeposited on a 2xxx aluminum alloy series substrate (EN-AW 2017) with zinc interlayer. The work concerns the determination of the impact of the change in the zeta potential of SiC nanoceramic particles used on properties of composite coatings (wear resistance, corrosion, etc.). The paper characterized the composite nickel coatings on aluminum alloy using SEM techniques, wear resistance tests by TABER method and coating adhesion to the substrate using the “scratch test” method. The corrosion resistance of coatings was also tested using electrochemical methods. The research allowed to determine the effect of SiC nanoceramic particle size on the value of the zeta potential in the model KCl solution.

Słowa kluczowe

EN

nanoparticles; organic additives; SiC; composite coatings; nickel coatings; zeta potential

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 2
• Strony: 935--940
• Opis fizyczny: Bibliogr. 10 poz., fot., rys., tab.

Twórcy

autor

Nowak M.

• Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Light Metals Division, 19 Piłsudskiego Str., 32-050 Skawina, Poland

autor

Mizera J.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Wołoska Str., 02-507 Warszawa, Poland

autor

Kłyszewski A.

• Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Light Metals Division, 19 Piłsudskiego Str., 32-050 Skawina, Poland

autor

Dobkowska A.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Wołoska Str., 02-507 Warszawa, Poland

autor

Boczkal S.

• Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Light Metals Division, 19 Piłsudskiego Str., 32-050 Skawina, Poland

autor

Kozik A.

• Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Light Metals Division, 19 Piłsudskiego Str., 32-050 Skawina, Poland

autor

Koprowski P.

• Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Light Metals Division, 19 Piłsudskiego Str., 32-050 Skawina, Poland

Bibliografia

• [1] L. I. Antropov, M. I. Bykowa, I. V. Shaklayanaya, Zashch. Met. 17, 420 (1981).
• [2] A. M. Shaibulin, G. V. Guryanov, Surf. Eng. Appl. Electroch. 2, 49 (1992).
• [3] M. M. Davilev, G. P. Petrov, I. A. Abdullin, V. A. Galovin, P. A. Norben, Surf. Eng. Appl. Eletrochem. 3, 26 (1986).
• [4] F. Delaunois, J. P. Petitjean, P. Lienard, M. Jacob-Duliere, Surf. Coat. Tech. 124, 201-209 (2000).
• [5] E. Rudnik, L. Burzyńska, M. Gut, Materials Chemistry and Physics 126, 573-579 (2011).
• [6] E. Rudnik, L. Burzyńska, J. Jędruch, L. Błaż, Applied Surface Science 255, 7164-7171 (2009).
• [7] L. Burzyńska, Metody hydrometalurgiczne otrzymywania kompozytów (in polish), AGH University of Science and Technology Press, Kraków (2003)
• [8] L. Chen, L. Wang, Z. Zeng, J. Zhang, Materials Science and Engineering A 434, 319-325 (2006).
• [9] M. Nowak, J. Mizera, A. Kłyszewski, A. Dobkowska, S. Boczkal, A. Kozik, P. Koprowski, Arch. Metall. Mater. 64, 4, 1329-1355 (2019).
• [10] C. F. Malfatti et al., Surf. Coat. Tech. 201, 6318-6324 (2007).

Uwagi

EN

1. The study was conducted as part of the project entitled: “Advanced materials and technologies for their production”, an Agreement with the Ministry of Science and Higher Education No. POIG.01.01.02-00-015/09-00 of 30 December 2009, co-financed by the European Regional Development Fund under the Operational Programme Innovative Economy.

PL

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).