Characteristics of tools used in the friction drilling method

• Autorzy: Szwałek K. , Nadolny K.

Identyfikatory

DOI

10.30464/jmee.2018.2.2.109

• Języki publikacji: EN

Abstrakty

EN

Friction drilling as a non-chip drilling method requires a special formed tool. This tool can be combined with conventional drilling machines as well as milling machines, also CNC ones. The choice depends only on the factors related to production volumes. Tool must have high durability properties to reach proper efficiency level. This means the number of boreholes that can be formed while maintaining the shape and structure of the surface within the dimensions tolerances limits. High temperature in the process also causes high durability properties. These article presents a review of possible solutions on tools mounting devices and tools functionality used in friction drilling process.

Słowa kluczowe

EN

friction drilling; Thermdrill; thin-walled materials; tool durability

PL

wiercenie tarciowe; wiercenie termiczne; materiały cienkościenne; trwałość narzędzia

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2018
• Tom: Vol. 2, No 2
• Strony: 109--114
• Opis fizyczny: Bibliogr. 10 poz., rys., wykr.

Twórcy

autor

Szwałek K.

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Raclawicka 15-17, 75-620, Koszalin, Poland

autor

Nadolny K.

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Poland

Bibliografia

• 1. Miller S.F., Tao J., Shin J. (2005), Friction drilling of cast metals, International Journal of Machine Tools & Manufacture, Vol. 46, pp. 1526–1535.
• 2. Szwałek K., 2017, Experimental studies of the friction drilling process of stainless steel shapes, Master Thesis, Koszalin University of Technology.
• 3. EURO-MET Trade Materials
• 4. STJORSEN Trade Materials
• 5. Han-Ming C., Shin-Min L., Lieh Dai Y. (2007). Machining Characteristic Study Of Friction Drilling On AISI 304 Stainless Steel. Journal of Materials Processing Technology, Vol. 207, pp. 180–186.
• 6. MACOSTA Trade Materials.
• 7. PARKSONS Trade Materials.
• 8. FLOWDRILL Trade Materials.
• 9. Miller S.F., Blau P.J., Shin A.J.(2006). Tool Wear In Friction Drilling, International Journal of Machine Tools & Manufacture, Vol. 47, pp.1636–1645.
• 10. Krasauskas P., Kilkevičius S., Česnavičius R. PačengaD. (2014). Experimental analysis and numerical simulation of the stainless AISI 304 steel friction drilling process. Mechanika,Vol. 20, No. 6, pp. 590-595.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).