The effectiveness of recrystallization high carbon steel with regard to the condition of material

• Autorzy: Grygier D.
• Języki publikacji: EN

Abstrakty

EN

The main aim of the studies presented in paper was to optimize the parameters of the recrystallisation annealing process used in the course of cold plastic working of high carbon steel for patented wires. Object of the research described in the work was eutectoid steel of 0,8% content of C designated for production of colddrawn wires applied for reinforcement of car tires, hoses and ropes. The results of tests show that the condition of the material and mainly degree of plastic deformation has a clearly influence on the effectiveness of pearlitic steel recrystallisation.

Słowa kluczowe

EN

recrystallization; pearlitic steel; annealing; cementite

PL

rekrystalizacja; cementyty; stal perlityczna; starzenie

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Interdisciplinary Journal of Engineering Sciences
• Rocznik: 2015
• Tom: Vol. 3, no. 1
• Strony: 20--24
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Grygier D.

• Wroclaw University of Technology, Department of Materials Science, Strength and Welding Technology, ul. Smoluchowskiego 25 50-372 Wrocław, Poland

Bibliografia

• [1] Ashby M.F., Jones D.R.H., Engineering Materials: An Introduction to Microstructures, Processing and Design, Elsevier, Oxford 2005.
• [2] Dobrucki W., Zarys obróbki plastycznej metali, Wyd. Śląsk, Katowice 1975.
• [3] Hertzberg R.W., Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons, New York 1989.
• [4] Morawiecki M., Sadok L., Wosiek E., Teoretyczne podstawy technologicznych procesów przeróbki plastycznej, Wyd. Śląsk, Katowice 1977.
• [5] Ashby M.F., Jones D.R.H., Engineering Materials: An Introduction to Microstructures, Application and Design, Elsevier, Oxford 2005.
• [6] Henkel D., Pense A.W., Structure and Properties of Engineering Materials, The McGraw-Hill Higher Education, Singapore 2002.
• [7] Cordier-Robert, C. at. all, Influence of torsion deformation on microstructure of cold-drawn pearlitic steel wire, Journal of Materials Science, Vol. 43 Iss.: 4, pp. 1241-1248, 2008.
• [8] Totten G.E., Howes M.A.H., Steel Heat Treatment Handbook, Marcel Dekker, New York 1997.
• [9] Vander Voort G.F. (ed), Atlas of TimeTemperature Diagrams for Iron and Steels, ASM International, Materials Park, OH 2004.
• [10] Hono, K.at. all, Cementite decomposition in heavily drawn pearlite steel wire, Scripta Materialia ,Vol.: 44, Iss.: 6, pp. 977-983, 2001.
• [11] Ivanisenko Y., Lojkowski W., Valiev R.Z., Fecht H.J., The mechanism of formation of nanostructure and dissolution of cementite in a pearlitic steel during high pressure torsion, Acta Materialia, Vol.: 51, Iss.: 18, pp. 5555-5570, 2003.
• [12] Izotov, V.I. at all, Influence of the pearlite fineness on the mechanical properties, deformation behavior, and fracture characteristics of carbon steel, Physics Of Metals And Metallography, Vol.: 103, Iss.: 5, pp: 519-529, 2007.
• [13] Zhang M.X., Kelly P.M., The morphology and formation mechanism of pearlite in steels, Materials Characterization, Vol.: 60, Iss.: 6, pp. 545-554, 2009.
• [14] Grygier D., Dudziński W.: Wpływ parametrów obróbki cieplnej na strukturę i własności mechaniczne drutów patentowanych, Interdyscyplinarność badań naukowych 2013: praca zbiorowa pod red. Jarosława Szreka, Wrocław, Oficyna Wydawnicza Politechniki 2013. s. 242-245.
• [15] Grygier D., Rutkowska-Gorczyca M., Jasiński R., Dudziński W.: Microstructure evaluations in pearlitic steels wires resulting from modification of the interoperation annealing process, Journal of Machine Engineering, 2014, vol. 14, nr 1, s. 53-62.