Selected technical problems of cogeneration of electric energy and heat

• Autorzy: Lampart P.
• Języki publikacji: EN

Abstrakty

EN

The paper is focused on selected technical problems of cogeneration of heat and electric power (combined heat and power – CHP) both in a large and small scale. First, largescale cogeneration systems applied in large power industry are discussed and results of adaptive control of extraction condensing turbines are presented. Then, advantages of distributed cogeneration are pointed out and small-scale cogeneration systems aimed for modernisation of a fossil-fuel district heating plant are investigated. At the end of the paper, organic Rankine cycle (ORC) heat and power units are described for biomassfuelled cogeneration and topping of main generation units to use the recovery heat.

Słowa kluczowe

EN

cogeneration of electric energy and heat; extraction-condensing turbine; adaptive control; distributed cogeneration; organic Rankine cycle; recovery heat

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN
• Czasopismo: Transactions of the Institute of Fluid-Flow Machinery
• Rocznik: 2015
• Tom: nr 127
• Strony: 137--152
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Lampart P.

• The Szewalski Institute of Fluid-Flow Machinery of the Polish Academy of Sciences Fiszera 14, 80-231 Gdańsk, Poland

Bibliografia

• [1] Perycz S.: Steam and Gas Turbines. Fluid Flow Machinery Series, Vol. 10, IMP PAN Publishers, Ossolinuem, 1992 (in Polish).
• [2] Polimeros G.: Energy Cogeneration. Handbook, Industrial Press, 2002.
• [3] Distributed Energy Peer Review. Darlington, USA, Dec. 2005.
• [4] Duvia A., Gaia M.: ORC plants for power production from biomasss from 0.4 to 1.5 MWe. Technology, efficiency, practical experiences and economy. In: Proc. 7th Holzenergie Symposium, ETH, Zürich 2002.
• [5] Mikielewicz J., Bykuć S., Mikielewicz D.: Application of renewable energy sources to drive ORC mikro CHP. In: Heat Transfer and Renewable Sources of Energy, (J. Mikielewicz, W. Nowak, A.A.Stachel Eds.) 2006.
• [6] Budyka I., Bułanin W., Kantos S., Rodin K.: Collection of Steam and Gas Turbine Designs. Gazenergoizdat, Moscow 1959 (in Russian).
• [7] Deich M.E., Filippov G.A., Lazarev L.Ya.: Collection of Axial Turbine Cascade Profiles. Mashinostroienie, Moscow 1965 (in Russian).
• [8] Puzyrewski R.: Stator cascade for mass flow control in a heat turbine. Patent Office, Poland, 1978, No 96981, 1978-07-05 (in Polish).
• [9] Lampart P., Puzyrewski R.: On the importance of adaptive control in extraction/condensing turbines. ASME Pap. GT2006-91160, 2006.
• [10] Lampart P., Puzyrewski R., Gardzilewicz A.: Application of the RANS model for the assessment of adaptive control in low pressure turbine parts. In: Proc. National Fluid Mechanics Conference (CD ROM), Waplewo, Sept. 23–26, 2004 (in Polish).
• [11] Yershov S., Rusanov A., Gardzilewicz A., Lampart P., Świrydczuk J.: Numerical simulation of 3D flows in axial turbomachines. TASK Quarterly 2(1998), 2, 319–347.
• [12] Chmielniak T.J.: Application of CFD methods for performance and design improvements of turbomachinery. Transactions IFFM 110(2002), 69–80.
• [13] Kiciński J., Lampart P., Bykuć S., Szymaniak M.: Pilot cogenerative/ poligenerative installations with an ORC modul. In: Proc. XIV Forum of Power Engineers GRE 2014, Szczyrk–Orle Gniazdo, Jun. 16– 18, 2014 (in Polish).
• [14] Nowak W., Borsukiewicz-Gozdur A.: ORC power plants as a means of utilisation of energy from low-temperature sources. Czysta Energia, 2(2011), 32–35 (in Polish).
• [15] Borsukiewicz-Gozdur A.: Influence of the ORC power plant heat recuperation solutions on effectiveness of the supplied waste heat utilization. Arch. Thermodyn. 31(2010),4, 11–124.
• [16] Rusanov A.: Designing and updating the flow part of axial and radialaxial turbines through the use of methods of mathematical modelling. Proc. 11th Int. Symp. on Compresor & Turbine Flow Systems Theory & Application Areas, Oct. 20–23, 2014, Łódź.
• [17] Klonowicz P., Surwiło J., Witanowski Ł., Suchocki T., Kozanecki Z., Lampart P.: Design and numerical study of turbines operating with MDM as working fluid. In: Proc. 11th Int. Symp. on Compresor & Turbine Flow Systems Theory & Application Areas, Oct. 20–23, 2014, Łódź.
• [18] Mikielewicz J., Mikielewicz D., Ihnatowicz E., Kaczmarczyk T., Wajs J., Matysko R., Bykuć S., RybińskiW.: Thermodynamic cycles of ORC micro power plants. IMP PAN Press, Gdańsk 2013 (in Polish).
• [19] Kozanecki Z., Kozanecka D., Klonowicz P., Łagodziński, Gizelska M., Tkacz E., Miazga K., Kaczmarek A.: Small power oil free turbomachines. IMP PAN Press, Gdańsk 2014 (in Polish).
• [20] Chmielniak T.: Thermodynamic Cycles of Heat Turbines. Fluid Flow Machinery Series, Vol. 2, IMP PAN Publishers, Ossolinuem, 1988 (in Polish).
• [21] Topolski J., Badur J.: Comparison of the combined cycle efficiencies with different heat recovery steam generators. Transactions IFFM 111(2003), 5–16.