Polyurethane elastomers based on carbonic and tartaric acid derivatives as renewable resources

• Autorzy: Rokicki G. , Mazurek M. , Tomczyk K.

Identyfikatory

DOI

10.14314/polimery.2015.541

Warianty tytułu

PL

Elastomery poliuretanowe otrzymywane z surowców odnawialnych — pochodnych kwasu węglowego i winowego

• Konferencja: Polyurethanes 2015 — cooperation for innovation (9-11.09. 2015 ; Cracow, Poland)
• Języki publikacji: EN

Abstrakty

EN

In the present study, three methods of introduction of the tartaric acid derivative into poly(carbonate-urethane)s chemical structure are presented and discussed. Tartaric acid derivative containing two free and two protected OH groups was introduced according to polycondensation, ring opening polymerization (in oligocarbonate synthesis step) and polyaddition (in prepolymer synthesis step as a chain extender) reactions. The prepared poly(carbonate-urethane)s were characterized by NMR and FT-IR spectroscopies, DSC and TGA thermal analyses, and mechanical properties measurements. The influence of the introduced tartaric acid derivative on properties of oligocarbonates and polyurethanes was investigated.

PL

Opisano trzy sposoby wbudowania do struktury poli(węglano-uretanów) pochodnej kwasu winowego, zawierającej dwie wolne i dwie zablokowane grupy OH, z wykorzystaniem polikondensacji, polimeryzacji z otwarciem pierścienia (na etapie syntezy oligowęglanodioli) i poliaddycji stopniowej (na etapie syntezy prepolimeru jako przedłużacza łańcucha). Otrzymane poli(węglano-uretany) scharakteryzowano metodami spektroskopii NMR i FT-IR, analizy termicznej DSC i TGA oraz za pomocą pomiarów wytrzymałości mechanicznej. Oceniono wpływ zawartości pochodnej kwasu winowego na właściwości oligowęglanów i poliuretanów.

Słowa kluczowe

EN

poly(carbonate-urethane); oligocarbonate diol; tartaric acid; (4S,5S)-4,5-bis(hydroxymethyl)-2,2-dimethyl-1,3-dioxolane

PL

poli(węglano-uretany); oligowęglanodiole; kwas winowy; (4S,5S)-4,5-bis(hydroksymetylo)-2,2; 2-dimetylo-1,3-dioksolan

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2015
• Tom: T. 60, nr 9
• Strony: 541--550
• Opis fizyczny: Bibliogr. 54 poz., rys.

Twórcy

autor

Rokicki G.

• Warsaw University of Technology, Faculty of Chemistry, Department of Polymer Chemistry and Technology, ul. Noakowskiego 3, 00-664 Warsaw, Poland

autor

Mazurek M.

• Warsaw University of Technology, Faculty of Chemistry, Department of Polymer Chemistry and Technology, ul. Noakowskiego 3, 00-664 Warsaw, Poland

autor

Tomczyk K.

• Warsaw University of Technology, Faculty of Chemistry, Department of Polymer Chemistry and Technology, ul. Noakowskiego 3, 00-664 Warsaw, Poland

Bibliografia

• [1] Griesser H.J.: Polymer Degradation and Stability 1991, 33, 329. http://dx.doi.org/10.1016/0141-3910(91)90080-B
• [2] Szycher M., Siciliano A.A., Reed A.M.: “Polymeric Biomaterials”, Dumitru S.: Marcel Dekker Inc., New York, 1994, pp. 233—244.
• [3] Stokes K.: Journal of Biomaterials Science, Polymer Edition 1990, 1, 207. http://dx.doi.org/10.1163/156856290X00062
• [4] Hergenrother R.W., Wabers H.D., Cooper S.L.: Biomaterials 1993, 14, 449. http://dx.doi.org/10.1016/0142-9612(93)90148-U
• [5] Tanzi M.C., Mantovani D., Petrini P. et al.: Journal of Biomedical Materials Research 1997, 36, 550. http://dx.doi.org/10.1002/(SICI)1097-4636(19970915)36:4<550::AID-JBM14>3.0.CO;2-E
• [6] Chen X.H., McCarthy S.P., Gross R.A.: Macromolecules 1998, 31, 662. http://dx.doi.org/10.1021/ma971227q
• [7] Tyson T., Finne-Wistrand A., Albertsson A.-C.: Biomacromolecules 2009, 10, 149. http://dx.doi.org/10.1021/bm801052m
• [8] Yang J., Liu F., Yang L., Li S.: European Polymer Journal 2010, 46, 783.
• [9] Zini E., Scandola M., Dobrzynski P. et al.: Biomacromolecules 2007, 8, 3661. http://dx.doi.org/10.1021/bm700773s
• [10] Zurita R., Puiggali J., Franco L., Rodriguez-Galan A.: Journal of Polymer Science, Part A: Polymer Chemistry 2006, 44, 993. http://dx.doi.org/10.1002/pola.21199
• [11] Ling J., Zhu W., Shen Z.: Macromolecules 2004, 37, 758. http://dx.doi.org/10.1021/ma035352f
• [12] Jiang Z., Liu C., Gross R.A.: Macromolecules 2008, 41, 4671. http://dx.doi.org/10.1021/ma702868a
• [13] Chandure A.S., Umare S.S., Pandey R.A.: European Polymer Journal 2008, 44, 2068. http://dx.doi.org/10.1016/j.eurpolymj.2008.01.001
• [14] Hong Y., Guan J., Fujimoto K.L. et al.: Biomaterials 2010, 31, 4249. http://dx.doi.org/10.1016/j.biomaterials.2010.02.005
• [15] Sobczak M., Debek C., Oledzka E. et al.: Journal of Polymer Science, Part A: Polymer Chemistry 2012, 50, 3904. http://dx.doi.org/10.1002/pola.26190
• [16] Mazurek M.M., Rokicki G.: Polish Journal of Chemical Technology 2013, 15, 80. http://dx.doi.org/10.2478/pjct-2013-0073
• [17] Mazurek M.M., Parzuchowski P.G., Rokicki G.: Journal of Applied Polymer Science 2014, 131, 39764. http://dx.doi.org/10.1002/APP.39764
• [18] Mei H., Zhong Z., Long F., Zhuo R.: Macromolecular Rapid Communications 2006, 27, 1894. http://dx.doi.org/10.1002/marc.200600484
• [19] Wang X.L., Zhuo R.X., Liu L.J. et al.: Journal of Polymer Science, Part A: Polymer Chemistry 2002, 40, 70. http://dx.doi.org/10.1002/pola.10088
• [20] Feng J., Zhuo R., He F.,Wang X.: Macromolecular Symposia 2003, 195, 237. http://dx.doi.org/10.1002/masy.200390128
• [21] He F.,Wang Y., Feng J. et al.: Polymer 2003, 44, 3215. http://dx.doi.org/10.1016/S0032-3861(03)00227-1
• [22] Feng J., Wang X.-L., He F., Zhuo R.-X.: Macromolecular Rapid Communications 2007, 28, 754. http://dx.doi.org/10.1002/marc.200600774
• [23] Zhang X., Mei H., Hu C. et al.: Macromolecules 2009, 42, 1010. http://dx.doi.org/10.1021/ma802350g
• [24] Kühling S., Keul H., Höcker H. et al.: Macromolecular Chemistry and Physics 1991, 192, 1193. http://dx.doi.org/10.1002/macp.1991.021920518
• [25] Xie Z., Lu C., Chen X. et al.: Journal of Polymer Science, Part A: Polymer Chemistry 2007, 45, 1737. http://dx.doi.org/10.1002/pola.21941
• [26] Al-Azemi T.F., Bisht K.S.: Macromolecules 1999, 32, 6536. http://dx.doi.org/10.1021/ma990639r
• [27] Al-Azemi T.F., Harmon J.P., Bisht K.S.: Biomacromolecules 2000, 1, 493. http://dx.doi.org/10.1021/bm005552o
• [28] Al-Azemi T.F., Bisht K.S.: Journal of Polymer Science, Part A: Polymer Chemistry 2002, 40, 1267. http://dx.doi.org/10.1002/pola.10212
• [29] Storey R.F., Mullen B.D., Melchert K.M.: Journal of Macromolecular Science, Part A: Pure and Applied Chemistry 2001, 38, 897. http://dx.doi.org/10.1081/MA-100104943
• [30] Wang L.-S., Cheng S.-X., Zhuo R.-X.: Macromolecular Rapid Communications 2004, 25, 959. http://dx.doi.org/10.1002/marc.200300319
• [31] Wang L.S., Jiang X.S., Wang H. et al.: Chinese Chemical Letters 2005, 16, 572.
• [32] Weiser J.R., Zawaneh P.N., Putnam D.: Biomacromolecules 2011, 12, 977. http://dx.doi.org/10.1021/bm101342p
• [33] Gawronski J., Gawronska K.: “Tartaric and Malic Acids in Synthesis: ASource Book of Building Blocks, Ligands, Auxiliaries, and Resolving Agents”,Wiley-Interscience, New York 1999.
• [34] Synoradzki L., Ruskowski P., Bernas U.: Organic Preparations and Procedures International: The New Journal for Organic Synthesis 2005, 37, 37. http://dx.doi.org/10.1080/00304940509355401
• [35] Bou J.J., Rodriguez-Galan A., Munoz-Guerra S.: Macromolecules 1993, 26, 5664. http://dx.doi.org/10.1021/ma00073a020
• [36] Bou J.J., Iribarren I., Munoz-Guerra S.: Macromolecules 1994, 27, 5263. http://dx.doi.org/10.1021/ma00097a004
• [37] Iribarren I., Aleman C., Bou J.J., Munoz-Guerra S.: Macromolecules 1996, 29, 4397. http://dx.doi.org/10.1021/ma951394v
• [38] Villuendas I., Molina I., Regano C. et al.: Macromolecules 1999, 32, 8033. http://dx.doi.org/10.1021/ma990407s
• [39] Villuendas I., Iribarren J.I., Munoz-Guerra S.: Macromolecules 1999, 32, 8015. http://dx.doi.org/10.1021/ma991050v
• [40] Shibata Y., Takasu A.: Journal of Polymer Science, Part A: Polymer Chemistry 2009, 47, 5747. http://dx.doi.org/10.1002/pola.23619
• [41] Kimura H., Yoshinari T., Takeshi M.: Polymer Journal 1999, 31, 388. http://dx.doi.org/10.1295/polymj.31.388
• [42] Karjalainen J.K., Hormi O.E.O., Sherrington D.C.: Molecules 1998, 3, 51.
• [43] Acemoglu M., Bantle S., Mindt T., Nimmerfall F.: Macromolecules 1995, 28, 3030. http://dx.doi.org/10.1021/ma00113a004
• [44] Yokoe M., Aoi K., Okada M.: Journal of Polymer Science, Part A: Polymer Chemistry 2005, 43, 3909. http://dx.doi.org/10.1002/pola.20830
• [45] Ahlers M., Krone V., Walch A.: Advanced Materials 1992, 4, 230. http://dx.doi.org/10.1002/adma.19920040316
• [46] Schliecker G., Schmidt C., Fuchs S., Kissel T.: Journal of Controlled Release 2004, 98, 11. http://dx.doi.org/10.1016/j.jconrel.2004.03.035
• [47] Wu R., Al-Azemi T.F., Bisht K.S.: Biomacromolecules 2008, 9, 2921. http://dx.doi.org/10.1021/bm800696q
• [48] Wu R., AL-Azemi T.F., Bisht K.S.: Macromolecules 2009, 42, 2401. http://dx.doi.org/10.1021/ma802546v
• [49] Yokoe M., Aoi K., Okada M.: Journal of Polymer Science, Part A: Polymer Chemistry 2005, 43, 3909. http://dx.doi.org/10.1002/pola.20830
• [50] Tomczyk K.M., Parzuchowski P.G., Kozakiewicz J. et al.: Polimery 2010, 55, 366.
• [51] Kozakiewicz J., Rokicki G., Przybylski J. et al.: Polimery 2011, 56, 564.
• [52] Dieterich D.: “Polyurethane Handbook” (Ed. Oertel G.), C. H. Verlag, New York 1994.
• [53] Mazurek M.M., Tomczyk K., Auguscik M. et al.: Polymers Advanced Technologies 2015, 26, 57. http://dx.doi.org/10.1002/pat.3419
• [54] Matuszak M.L., Frisch K.V., Reegen S.L.: Journal of Polymer Science, Part A: Polymer Chemistry 1973, 11, 1683. http://dx.doi.org/10.1002/pol.1973.170110716